FCC ID QYLPHS8-PZ
GSM/GPRS/UMTS/HSPA MODULE
by Getac Technology Corporation
Grantee Code: QYL Product Code: PHS8PZ
Latest application date: 2012-09-27
FCC ID Device Details
| FCC ID | QYLPHS8-PZ |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QYL |
| Product Code | PHS8PZ |
| Applicant Business | Getac Technology Corporation 🇹🇼 |
| Related Domains |  mitac-mtc.com.tw |
| Equipment Class | GSM/GPRS/UMTS/HSPA MODULE |
| Test Firm | SPORTON International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-27 |
| 824.2-848.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: QIPPHS8-P Grant Date: 12/07/2011 | 2012-09-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-03-26 | PDF 1.7 MB |
| Internal Photos | Internal Photos | 2013-03-26 | PDF 2 MB |
| External Photos | External Photos | 2013-03-26 | PDF 606.4 KB |
| External Photos | External Photos | 2013-03-04 | PDF 374.7 KB |
| ID Label | ID Label/Location Info | 2012-09-27 | PDF 60.7 KB |
| Label Location on Host | ID Label/Location Info | 2012-09-27 | PDF 94.2 KB |
| Label Location | ID Label/Location Info | 2012-09-06 | PDF 109.3 KB |
| Label Sample | ID Label/Location Info | 2012-09-06 | PDF 38.8 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-26 | PDF 257.9 KB |
| Radiated Power ERP EIRP | Test Report | 2012-09-27 | PDF 262.1 KB |
| Class II Permissive Change | Cover Letter(s) | 2012-09-27 | PDF 116.6 KB |
| Long-term Confidentiality | Cover Letter(s) | 2012-09-27 | PDF 146.5 KB |
| POA | Cover Letter(s) | 2012-09-27 | PDF 125 KB |
| Short-term Confidentiality | Cover Letter(s) | 2012-09-27 | PDF 149.5 KB |
| Change in ID Letter New Holder | Cover Letter(s) | 2012-09-06 | PDF 161.7 KB |
| Change in ID Letter Original Holder | Cover Letter(s) | 2012-09-06 | PDF 409.6 KB |
| Short Term Confidential Letter | Cover Letter(s) | 2012-09-06 | PDF 150 KB |
| RFExp_Appendix A_WLAN | RF Exposure Info | 2012-09-27 | PDF 267.9 KB |
| RFExp_Appendix A_WWAN | RF Exposure Info | 2012-09-27 | PDF 168 KB |
| RFExp_Appendix B_WLAN | RF Exposure Info | 2012-09-27 | PDF 599.8 KB |
| RFExp_Appendix B_WWAN | RF Exposure Info | 2012-09-27 | PDF 391.5 KB |
| RFExp_Appendix C_WLAN | RF Exposure Info | 2012-09-27 | PDF 3.4 MB |
| RFExp_Appendix C_WWAN | RF Exposure Info | 2012-09-27 | PDF 3.8 MB |
| RFExp_WLAN | RF Exposure Info | 2012-09-27 | PDF 1.2 MB |
| RFExp_WWAN | RF Exposure Info | 2012-09-27 | PDF 1.2 MB |
Application Information
| Application ID | 8B9GEwttMo6qE7SBP6h53g== |
|---|---|
| Final Action Date | 2012-09-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018268243 |
| Model | PHS8-PZ |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | GSM/GPRS/UMTS/HSPA MODULE |
| Responsible Party | Celina Chen, Agency Specialist, celina.chen@mitac-mtc.com.tw , +886-2-27857888 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw  , 886-2-26962468 |
| TCB Email | certnotice@ccsemc.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/26/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to install this module into host tablets (FCC ID: QYLZ710 and QYLZ710R) with portable rf exposure conditions and collocated WiFi/Bluetooth and RFID transmitters as detailed in this filing. The highest radiated powers for these hosts are 0.98 W erp for Part 22, and 0.78 W eirp for Part 24. Output power listed is peak conducted. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz). SAR compliance for specific-host portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values for body, hot spot and simultaneous transmission exposure conditions are 0.27 W/Kg, 0.27W/Kg and 0.57 W/Kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8B9GEwttMo6qE7SBP6h53g== | 2012-09-27 | Class II permissive change or modification of presently authorized equipment |
| 8K1a4Kp9cn8XHASpiIbxXw== | 2012-09-06 | Change in identification of presently authorized equipment. Original FCC ID: QIPPHS8-P Grant Date: 12/07/2011 |
| 4c6FSmVg6aAPRbgbw8Hi3g== | 2012-09-06 | Change in identification of presently authorized equipment. Original FCC ID: QIPPHS8-P Grant Date: 12/07/2011 |
Equipment Authorization
Grants
TCB Grant - Application 8K1a4Kp9cn8XHASpiIbxXw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/06/2012 Application Dated: 09/05/2012 |
| Getac Technology Corporation |
| 5F.,Building A,No.209,Sec.1 Nangang.,Rd., |
| Taipei City, 11568 Taiwan |
| Attention: Celina Chen , Agency Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYLPHS8-PZ |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | GSM/GPRS/HSPA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application 8K1a4Kp9cn8XHASpiIbxXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City, 11568 Taiwan |
Date of Grant: 09/06/2012 Application Dated: 09/05/2012 |
| Attention: Celina Chen , Agency Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYLPHS8-PZ |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | GSM/GPRS/HSPA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/27/2012 Application Dated: 09/27/2012 |
| Getac Technology Corporation |
| 5F.,Building A,No.209,Sec.1 Nangang.,Rd., |
| Taipei City, 11568 Taiwan |
| Attention: Celina Chen , Agency Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYLPHS8-PZ |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSPA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 2.399 | 2.5 PM | 249KGXW | |
| 22H | 824.2 - 848.8 | 1.072 | 2.5 PM | 235KG7W | |
| 22H | 826.4 - 846.6 | 0.692 | 2.5 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 1.122 | 2.5 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.871 | 2.5 PM | 241KG7W | |
| 24E | 1852.4 - 1907.6 | 0.676 | 2.5 PM | 4M17F9W |
| Class II Permissive Change to install this module into host tablets (FCC ID: QYLZ710 and QYLZ710R) with portable rf exposure conditions and collocated WiFi/Bluetooth and RFID transmitters as detailed in this filing. The highest radiated powers for these hosts are 0.98 W erp for Part 22, and 0.78 W eirp for Part 24. Output power listed is peak conducted. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz). SAR compliance for specific-host portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values for body, hot spot and simultaneous transmission exposure conditions are 0.27 W/Kg, 0.27W/Kg and 0.57 W/Kg respectively. |
EAS Grant - Application 8B9GEwttMo6qE7SBP6h53g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City, 11568 Taiwan |
Date of Grant: 09/27/2012 Application Dated: 09/27/2012 |
| Attention: Celina Chen , Agency Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYLPHS8-PZ |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSPA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 2.399 | 2.5 PM | 249KGXW | |
| 22H | 824.2 - 848.8 | 1.072 | 2.5 PM | 235KG7W | |
| 22H | 826.4 - 846.6 | 0.692 | 2.5 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 1.122 | 2.5 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.871 | 2.5 PM | 241KG7W | |
| 24E | 1852.4 - 1907.6 | 0.676 | 2.5 PM | 4M17F9W |
| Class II Permissive Change to install this module into host tablets (FCC ID: QYLZ710 and QYLZ710R) with portable rf exposure conditions and collocated WiFi/Bluetooth and RFID transmitters as detailed in this filing. The highest radiated powers for these hosts are 0.98 W erp for Part 22, and 0.78 W eirp for Part 24. Output power listed is peak conducted. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz). SAR compliance for specific-host portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values for body, hot spot and simultaneous transmission exposure conditions are 0.27 W/Kg, 0.27W/Kg and 0.57 W/Kg respectively. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/06/2012 Application Dated: 09/05/2012 |
| Getac Technology Corporation |
| 5F.,Building A,No.209,Sec.1 Nangang.,Rd., |
| Taipei City, 11568 Taiwan |
| Attention: Celina Chen , Agency Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYLPHS8-PZ |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSPA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 2.399 | 2.5 PM | 249KGXW | |
| 22H | 824.2 - 848.8 | 1.072 | 2.5 PM | 235KG7W | |
| 22H | 826.4 - 846.6 | 0.692 | 2.5 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 1.122 | 2.5 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.871 | 2.5 PM | 241KG7W | |
| 24E | 1852.4 - 1907.6 | 0.676 | 2.5 PM | 4M17F9W |
| Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz). |
EAS Grant - Application 4c6FSmVg6aAPRbgbw8Hi3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City, 11568 Taiwan |
Date of Grant: 09/06/2012 Application Dated: 09/05/2012 |
| Attention: Celina Chen , Agency Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QYLPHS8-PZ |
| Name of Grantee: | Getac Technology Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/UMTS/HSPA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 2.399 | 2.5 PM | 249KGXW | |
| 22H | 824.2 - 848.8 | 1.072 | 2.5 PM | 235KG7W | |
| 22H | 826.4 - 846.6 | 0.692 | 2.5 PM | 4M17F9W | |
| 24E | 1850.2 - 1909.8 | 1.122 | 2.5 PM | 247KGXW | |
| 24E | 1850.2 - 1909.8 | 0.871 | 2.5 PM | 241KG7W | |
| 24E | 1852.4 - 1907.6 | 0.676 | 2.5 PM | 4M17F9W |
| Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz). |
| Mail To: |