FCC ID QZC-ELIR1
Wireless Light Control Module
by Elster Solutions, LLC
Grantee Code: QZC Product Code: ELIR1
Latest application date: 2016-11-03
FCC ID Device Details
| FCC ID | QZC-ELIR1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QZC |
| Product Code | ELIR1 |
| Applicant Business | Elster Solutions, LLC 🇺🇸 |
| Related Domains | |
| Equipment Class | Wireless Light Control Module |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.4-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2016-11-03 |
| 902.4-927.6 MHz | Original Equipment | 2016-04-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2016-04-15 | PDF 65.8 KB |
| Internal Photos | Internal Photos | 2016-11-03 | PDF 2 MB |
| Internal Photos | Internal Photos | 2016-04-15 | PDF 542.1 KB |
| External Photos | External Photos | 2016-04-15 | PDF 105.6 KB |
| ID Label and Location | ID Label/Location Info | 2016-04-15 | PDF 80.2 KB |
| ID Label and Placement | ID Label/Location Info | 2016-04-15 | PDF 39.4 KB |
| Test Setup Photos | Test Setup Photos | 2016-11-03 | PDF 167.1 KB |
| Test Setup Photos 1 | Test Setup Photos | 2016-04-15 | PDF 154.1 KB |
| Test Report | Test Report | 2016-11-03 | PDF 374 KB |
| Test Report 2 | Test Report | 2016-04-15 | PDF 3.3 MB |
| Test Report | Test Report | 2016-04-15 | PDF 2.8 MB |
| Attestation Power Removal | Attestation Statements | 2016-11-03 | PDF 151.2 KB |
| Agency Agreement | Cover Letter(s) | 2016-11-03 | PDF 178 KB |
| Confidentiality Request | Cover Letter(s) | 2016-11-03 | PDF 221.1 KB |
| Description of Changes | Cover Letter(s) | 2016-11-03 | PDF 165.4 KB |
| FCC Cover Letter | Cover Letter(s) | 2016-11-03 | PDF 61.2 KB |
| Authorization Letter | Cover Letter(s) | 2016-04-15 | PDF 112.9 KB |
| Confidentiality Request | Cover Letter(s) | 2016-04-15 | PDF 169.7 KB |
| RF Exposure | RF Exposure Info | 2016-11-03 | PDF 24.4 KB |
| RF Exposure | RF Exposure Info | 2016-04-15 | PDF 140.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 217.2 KB | |
| Schematics Metadata only | Schematics | PDF 530 KB | |
| Schematics Metadata only | Schematics | PDF 923.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 721.9 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 60.7 KB |
Application Information
| Application ID | B6GSqVmx+L0LeTjbWI1YOw== |
|---|---|
| Final Action Date | 2016-11-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008634834 |
| Model | ELIR1 |
| Frequency Range | 902.4-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Light Control Module |
| Responsible Party | John - Holt, Principal Engineer, john.holt@us.elster.com |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Sam Wismer, TUV SUD America, Inc., swismer@tuvam.com |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to address antenna match change as described in this filing. C2PC also turns off the high power mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| B6GSqVmx+L0LeTjbWI1YOw== | 2016-11-03 | Class II permissive change or modification of presently authorized equipment |
| flhEEANNXfP2lofWrZ/lMA== | 2016-04-15 | Original Equipment |
Grants
TCB Grant - Application flhEEANNXfP2lofWrZ/lMA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 04/15/2016 Application Dated: 04/13/2016 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-ELIR1 |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ELSTER LIGHTING INTELLIGENCE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.1892 | |||
| 15C | 902.4 - 927.6 | 0.8035 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application flhEEANNXfP2lofWrZ/lMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 04/15/2016 Application Dated: 04/13/2016 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-ELIR1 |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ELSTER LIGHTING INTELLIGENCE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.1892 | |||
| 15C | 902.4 - 927.6 | 0.8035 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 11/03/2016 Application Dated: 11/03/2016 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-ELIR1 |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Light Control Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.1892 | |||
| 15C | 902.4 - 927.6 | 0.8035 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to address antenna match change as described in this filing. C2PC also turns off the high power mode. |
EAS Grant - Application B6GSqVmx+L0LeTjbWI1YOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 11/03/2016 Application Dated: 11/03/2016 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-ELIR1 |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Light Control Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.1892 | |||
| 15C | 902.4 - 927.6 | 0.8035 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to address antenna match change as described in this filing. C2PC also turns off the high power mode. |
| Mail To: |