FCC ID QZC-GNICI

GNICI Module

by Elster Solutions, LLC

Grantee Code: QZC   Product Code: GNICI
Latest application date: 2026-04-01

FCC ID Device Details

FCC IDQZC-GNICI
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQZC
Product CodeGNICI
Applicant BusinessElster Solutions, LLC 🇺🇸
Related Domains honeywell.com
Equipment ClassGNICI Module
Test FirmUL LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
916-927.6 MHzClass II permissive change or modification of presently authorized equipment2026-04-01
916-927.6 MHzOriginal Equipment2020-01-21

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2020-01-21PDF 11.9 KB
Internal PhotosInternal Photos2020-01-21PDF 791.7 KB
External PhotosExternal Photos2020-01-21PDF 557.9 KB
GNIC ID labels v3ID Label/Location Info2026-04-01PDF 189.5 KB
Label InformationID Label/Location Info2020-01-21PDF 150.4 KB
Test Setup PhotosTest Setup Photos2020-01-21PDF 305.8 KB
Antenna ENG_DS_ANT-DS-TRA9023NP_A1Test Report2026-04-01PDF 174.4 KB
Antenna MFB-SeriesTest Report2026-04-01PDF 284.2 KB
Pigeon Antenna Under Test Report v2Test Report2026-04-01PDF 848.9 KB
R16195697-E2 v2 GNICI FCC C2PC ReportTest Report2026-04-01PDF 1.6 MB
Test ReportTest Report2020-01-21PDF 1.9 MB
FCC agentdesignation attestation letterAttestation Statements2026-04-01PDF 247.9 KB
GNIC_covered_equipment_attestation_v2Attestation Statements2026-04-01PDF 121 KB
GNIC_FCC C2PC letterCover Letter(s)2026-04-01PDF 189.2 KB
GNIC_FCC_Confidentiality_Request v3Cover Letter(s)2026-04-01PDF 126.4 KB
GNIC_FCC_Modular_Approval_LetterCover Letter(s)2026-04-01PDF 196.9 KB
GNIC_anti_drug_letterCover Letter(s)2026-04-01PDF 217.2 KB
Agency Agreement LetterCover Letter(s)2020-01-21PDF 12.7 KB
Confidentiality RequestCover Letter(s)2020-01-21PDF 22.1 KB
Modular Approval LetterCover Letter(s)2020-01-21PDF 73.5 KB
R16195697-E4 v2 GNICI FCC IC MPE REPORTRF Exposure Info2026-04-01PDF 414.5 KB
RF ExposureRF Exposure Info2020-01-21PDF 23.3 KB
User Manual IL42-5052A Metadata onlyUsers Manual2026-09-28PDF 25.5 KB
Internal GNIC 5D26423 Photos v3 Metadata onlyInternal Photos2026-09-28PDF 585.3 KB
GNIC External Photos v2 Metadata onlyExternal Photos2026-09-28PDF 361.1 KB
R16195697-EP1 v2 FCC IC SETUP PHOTOS EXHBIT Metadata onlyTest Setup Photos2026-09-28PDF 2.7 MB
Block Diagram Metadata onlyBlock DiagramPDF 83.2 KB
GNICI block diagram v3 Metadata onlyBlock DiagramPDF 136.4 KB
Schematics Metadata onlySchematicsPDF 656.7 KB
confidential_GNIC_schematics Metadata onlySchematicsPDF 656.7 KB
GNICI_Theory_of_Operation_v4 Metadata onlyOperational DescriptionPDF 492 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 296.4 KB

Application Information

Application IDRxe/GmmahLWT0PaAyIvwtg==
Final Action Date2026-04-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008634834
ModelGNICI
Frequency Range916-927.6 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionGNICI Module
Responsible PartyCharles - Greene, Charles.Greene@Honeywell.com , 919-212-5018
Technical ContactLariah Sanders, UL LLC, lariah.sanders@ul.com , 9195490945
Non-Technical ContactCharles Greene, Elster Solutions, LLC, charles.greene@honeywell.com
Test FirmSteven Thompson, UL LLC, steven.d.thompson@ul.com , 919 549 1430
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
Rxe/GmmahLWT0PaAyIvwtg==2026-04-01Class II permissive change or modification of presently authorized equipment
p6QoRAlNehJd62QmiTMGTg==2020-01-21Original Equipment

Equipment Authorization

FrequencyOutputRules
916-927.6 MHz0.250000015C

Grants

TCB Grant - Application Rxe/GmmahLWT0PaAyIvwtg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/01/2026

Application Dated: 04/01/2026
Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
 
Attention: Charles Greene , RF Wireless Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-GNICI
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GNICI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 916.0  -  927.6 0.25  

Class II permissive change to add new host (A4 Pro) and add three antennas.

Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Model GNICI is co-located with FCC ID: QOQ13.


TCB Grant - Application p6QoRAlNehJd62QmiTMGTg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 01/21/2020

Application Dated: 01/20/2020
Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-GNICI
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GNICI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 916.0  -  927.6 0.25  

Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Model GNICI is co-located with FCC ID: QOQ13.

EAS Grant - Application p6QoRAlNehJd62QmiTMGTg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
United States
  Date of Grant: 01/21/2020

Application Dated: 01/20/2020
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-GNICI
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GNICI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 916.0  -  927.6 0.25  

Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Model GNICI is co-located with FCC ID: QOQ13.



Mail To: