FCC ID QZC-R2EAI

R2EAI

by Elster Solutions, LLC

Grantee Code: QZC   Product Code: R2EAI
Latest application date: 2008-12-19

FCC ID Device Details

FCC IDQZC-R2EAI
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQZC
Product CodeR2EAI
Applicant BusinessElster Solutions, LLC 🇺🇸
Related Domains us.elster.com
Equipment ClassR2EAI
Test FirmTUV Rheinland of North America

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
916-927.6 MHzClass II permissive change or modification of presently authorized equipment2008-12-19
916-927.6 MHzOriginal Equipment2008-06-30

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2008-06-30PDF 81.9 KB
Internal PhotosInternal Photos2008-12-19PDF 466.8 KB
INTERNAL PHOTOSInternal Photos2008-06-30PDF 749 KB
EXTERNAL PHOTOSExternal Photos2008-06-30PDF 211.2 KB
LABEL INFOID Label/Location Info2008-06-30PDF 191.6 KB
TEST SETUP PHOTOSTest Setup Photos2008-06-30PDF 233.9 KB
Compliance Test ReportTest Report2008-12-19PDF 452 KB
TEST REPORTTest Report2008-06-30PDF 384.5 KB
C2CP RequestCover Letter(s)2008-12-19PDF 22.1 KB
Confidentiality RequestCover Letter(s)2008-12-19PDF 28.9 KB
Reply to FCC Correspondence 36779Cover Letter(s)2008-12-19PDF 21.9 KB
Reply to FCC question 36816Cover Letter(s)2008-12-19PDF 22.1 KB
Revised Confidentiality LetterCover Letter(s)2008-12-19PDF 29 KB
CONFIDENTIAL LETTERCover Letter(s)2008-06-30PDF 31.8 KB
LETTER OF AGENCYCover Letter(s)2008-06-30PDF 22.6 KB
MODULAR CERTIFICATION REQUESTCover Letter(s)2008-06-30PDF 28.8 KB
MPERF Exposure Info2008-06-30PDF 82.5 KB

Application Information

Application IDUklpdS94SgO5cMfgZcCbKg==
Final Action Date2008-12-19
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008634834
Model-R2EAI
Frequency Range916-927.6 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionR2EAI
Responsible PartyJohn - Holt, Principal Engineer, john.holt@us.elster.com , 919-250-5557
Technical ContactJohn R Holt, Elster Electricity, LLC, john.holt@us.elster.com , (919) 250-5557
Test FirmMichael Moranha, TUV Rheinland of North America, mmoranha@us.tuv.com , 919-554-0901
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modula.

Applications

Application IDDatePurpose
UklpdS94SgO5cMfgZcCbKg==2008-12-19Class II permissive change or modification of presently authorized equipment
OZfganuYiRKm7PtjZ/6DHA==2008-06-30Original Equipment

Equipment Authorization

FrequencyOutputRules
916-927.6 MHz0.220000015C

Grants

TCB Grant - Application UklpdS94SgO5cMfgZcCbKg==

This application does not exist.

EAS Grant - Application UklpdS94SgO5cMfgZcCbKg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
United States
  Date of Grant: 12/19/2008

Application Dated: 10/24/2008
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-R2EAI
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: R2EAI
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 916.0  -  927.6 0.22  

Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Limited Single Modula.



TCB Grant - Application OZfganuYiRKm7PtjZ/6DHA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 06/30/2008

Application Dated: 06/30/2008
Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-R2EAI
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: R2EAI
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 916.0  -  927.6 0.22  

Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Limited Single Modular

EAS Grant - Application OZfganuYiRKm7PtjZ/6DHA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
United States
  Date of Grant: 06/30/2008

Application Dated: 06/30/2008
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-R2EAI
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: R2EAI
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 916.0  -  927.6 0.22  

Modular Approval. Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in this filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for MPE compliance. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Limited Single Modular



Mail To: