FCC ID QZC-REXU
REXU Printed Circuit Board Assembly
by Elster Solutions, LLC
Grantee Code: QZC Product Code: REXU
Latest application date: 2015-09-30
Device Images
FCC ID Device Details
| FCC ID | QZC-REXU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QZC |
| Product Code | REXU |
| Applicant Business | Elster Solutions, LLC 🇺🇸 |
| Related Domains |  us.elster.com |
| Equipment Class | REXU Printed Circuit Board Assembly |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-927.9 MHz | Class II permissive change or modification of presently authorized equipment | 2015-09-30 |
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-04 |
| 902.3-927.9 MHz | Original Equipment | 2012-08-21 |
| 2405-2470 MHz | Original Equipment | 2012-08-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2015-09-30 | PDF 2.3 MB |
| Manual | Users Manual | 2012-08-21 | PDF 414.4 KB |
| Internal Photos | Internal Photos | 2013-02-17 | PDF 266.5 KB |
| External Photos | External Photos | 2015-09-30 | PDF 2.9 MB |
| External Photos | External Photos | 2012-08-21 | PDF 12.6 KB |
| Label Information | ID Label/Location Info | 2012-08-21 | PDF 114.9 KB |
| Test Setup Photos | Test Setup Photos | 2015-09-30 | PDF 472 KB |
| Test Setup Photos | Test Setup Photos | 2012-12-04 | PDF 64.3 KB |
| Test Setup Photos | Test Setup Photos | 2012-08-21 | PDF 132 KB |
| Test Report | Test Report | 2015-09-30 | PDF 263.1 KB |
| Test Report | Test Report | 2012-12-04 | PDF 267 KB |
| Test Report - DSS | Test Report | 2012-08-21 | PDF 1.2 MB |
| Test Report - DTS | Test Report | 2012-08-21 | PDF 384.9 KB |
| Agency Agreement | Cover Letter(s) | 2015-09-30 | PDF 181 KB |
| Confidentiality Request | Cover Letter(s) | 2015-09-30 | PDF 205.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2015-09-30 | PDF 13.2 KB |
| Agency Agreement | Cover Letter(s) | 2012-12-04 | PDF 51 KB |
| Confidentiality Request | Cover Letter(s) | 2012-12-04 | PDF 175.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-12-04 | PDF 12.5 KB |
| Confidentiality Request | Cover Letter(s) | 2012-08-21 | PDF 54.1 KB |
| Confidentiality Request - Third Party | Cover Letter(s) | 2012-08-21 | PDF 12.8 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-08-21 | PDF 12.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2012-08-21 | PDF 54.7 KB |
| RF Exposure | RF Exposure Info | 2015-09-30 | PDF 101.4 KB |
| RF Exposure | RF Exposure Info | 2012-08-21 | PDF 30.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 500.9 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 1.1 MB |
Application Information
| Application ID | fkwqU/rudgslXTUYU45+GQ== |
|---|---|
| Final Action Date | 2015-09-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008634834 |
| Model | REXU |
| Frequency Range | 902.3-927.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | REXU Printed Circuit Board Assembly |
| Responsible Party | John - Holt, Principal Engineer, john.holt@us.elster.com , 919-250-5557 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com  , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Class II Change to add new antenna type/host configuration as described in this filing. New antenna limited to professional installation only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fkwqU/rudgslXTUYU45+GQ== | 2015-09-30 | Class II permissive change or modification of presently authorized equipment |
| 1/1UQBdPR887c4EtXhndtQ== | 2012-12-04 | Class II permissive change or modification of presently authorized equipment |
| edxzt8fsxcafDyiFenj9nA== | 2012-08-21 | Original Equipment |
| 8flPTVPw7cVCWO9xGAuSjQ== | 2012-08-21 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application fkwqU/rudgslXTUYU45+GQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 09/30/2015 Application Dated: 09/30/2015 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.9 | 0.986 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Class II Change to add new antenna type/host configuration as described in this filing. New antenna limited to professional installation only. |
EAS Grant - Application fkwqU/rudgslXTUYU45+GQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 09/30/2015 Application Dated: 09/30/2015 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.9 | 0.986 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Class II Change to add new antenna type/host configuration as described in this filing. New antenna limited to professional installation only. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/21/2012 Application Dated: 08/21/2012 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.9 | 0.986 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
EAS Grant - Application edxzt8fsxcafDyiFenj9nA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 08/21/2012 Application Dated: 08/21/2012 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.9 | 0.986 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/21/2012 Application Dated: 08/21/2012 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2470.0 | 0.106 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Device must operate with a source-based, time-averaged duty cycle not to exceed 66.1% controlled by software or firmware. |
EAS Grant - Application 8flPTVPw7cVCWO9xGAuSjQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 08/21/2012 Application Dated: 08/21/2012 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2470.0 | 0.106 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Device must operate with a source-based, time-averaged duty cycle not to exceed 66.1% controlled by software or firmware. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 12/04/2012 Application Dated: 12/04/2012 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.106 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Device must operate with a source-based, time-averaged duty cycle not to exceed 66.1% controlled by software or firmware. Class II Change to add new 2475 MHz channel and extend frequency range. Output power must be reduced to 43.85 mW when transmitting on this new channel. |
EAS Grant - Application 1/1UQBdPR887c4EtXhndtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 12/04/2012 Application Dated: 12/04/2012 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-REXU |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | REXU Printed Circuit Board Assembly |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.106 |
| Single Modular approval. Power listed is conducted. Device is limited to mobile and fixed applications only. Approval is limited to OEM installation only. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Device must operate with a source-based, time-averaged duty cycle not to exceed 66.1% controlled by software or firmware. Class II Change to add new 2475 MHz channel and extend frequency range. Output power must be reduced to 43.85 mW when transmitting on this new channel. |
| Mail To: |