FCC ID QZC-REXUA

QZCREXUA, QZC REXUA, QZC-REXUA, OZC-REXUA, 0ZC-REXUA

Elster Solutions, LLC REXUA Printed Circuit Board Assembly -REXUA

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: QZC-REXUA is QZC. The remaining characters of the FCC ID, -REXUA, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: REXUA Printed Circuit Board Assembly

App # Purpose Date Unique ID
1 Original Equipment 2015-09-11 WzffNs0sl3+D33P8U7C+Uw==
2 Original Equipment 2015-09-11 HHE0wK2+JNdW/IX/JfxvBw==
3 Class II Permissive Change 2018-08-03 Wd3HbOKmFabpNzKCnttf/w==

Operating Frequencies

Frequency RangePower OutputRule Parts App #
902.3-927.8 MHz427 mW15C 3.2
902.4-927.6 MHz850 mW15C 1.1
902.4-927.6 MHz850 mW15C 3.1
2.405-2.47 GHz105 mW15C 2.1

Exhibits

Available Exhibits

App #Document Type Submitted
Available
3 Confidentiality RequestCover Letter(s)
Adobe Acrobat PDF (25 kB)
2018-08-03
2018-08-03
3 Confidentiality Request - Third PartyCover Letter(s)
Adobe Acrobat PDF (50 kB)
2018-08-03
2018-08-03
3 Test ReportTest Report
Adobe Acrobat PDF (5813 kB)
2018-08-03
2018-08-03
2 Internal PhotosInternal Photos
Adobe Acrobat PDF (556 kB)
2015-09-11
2016-03-09
2 Test ReportTest Report
Adobe Acrobat PDF (543 kB)
2015-09-11
2015-09-11
2 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (511 kB)
2015-09-11
2015-09-11
2 RF ExposureRF Exposure Info
Adobe Acrobat PDF (125 kB)
2015-09-11
2015-09-11
2 ManualUsers Manual
Adobe Acrobat PDF (82 kB)
2015-09-11
2015-09-11
2 Label InformationID Label/Location Info
Adobe Acrobat PDF (138 kB)
2015-09-11
2015-09-11
2 Modular Approval LetterCover Letter(s)
Adobe Acrobat PDF (395 kB)
2015-09-11
2015-09-11
2 FCC Cover LetterCover Letter(s)
Adobe Acrobat PDF (13 kB)
2015-09-11
2015-09-11
2 Confidentiality RequestCover Letter(s)
Adobe Acrobat PDF (257 kB)
2015-09-11
2015-09-11
2 Agency AgreementCover Letter(s)
Adobe Acrobat PDF (182 kB)
2015-09-11
2015-09-11
2 External PhotosExternal Photos
Adobe Acrobat PDF (28 kB)
2015-09-11
2015-09-11
1 Internal PhotosInternal Photos
Adobe Acrobat PDF (556 kB)
2015-09-11
2016-03-09
1 Test ReportTest Report
Adobe Acrobat PDF (3436 kB)
2015-09-11
2015-09-11
1 Test Setup PhotosTest Setup Photos
Adobe Acrobat PDF (511 kB)
2015-09-11
2015-09-11
1 RF ExposureRF Exposure Info
Adobe Acrobat PDF (125 kB)
2015-09-11
2015-09-11
1 ManualUsers Manual
Adobe Acrobat PDF (82 kB)
2015-09-11
2015-09-11
1 Label InformationID Label/Location Info
Adobe Acrobat PDF (138 kB)
2015-09-11
2015-09-11
1 Modular Approval LetterCover Letter(s)
Adobe Acrobat PDF (395 kB)
2015-09-11
2015-09-11
1 FCC Cover LetterCover Letter(s)
Adobe Acrobat PDF (13 kB)
2015-09-11
2015-09-11
1 Confidentiality RequestCover Letter(s)
Adobe Acrobat PDF (257 kB)
2015-09-11
2015-09-11
1 Agency AgreementCover Letter(s)
Adobe Acrobat PDF (182 kB)
2015-09-11
2015-09-11
1 External PhotosExternal Photos
Adobe Acrobat PDF (28 kB)
2015-09-11
2015-09-11

APP # 3 (2018-08-03)

App # Document Type Submitted
Available
3 Confidentiality Request Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
3 Confidentiality Request - Third Party Cover Letter(s)
Adobe Acrobat PDF (50 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00
3 Test Report Test Report
Adobe Acrobat PDF (5813 kB)
2018-08-03 00:00:00
2018-08-03 00:00:00

APP # 2 (2015-09-11)

App # Document Type Submitted
Available
2 Internal Photos Internal Photos
Adobe Acrobat PDF (556 kB)
2015-09-11 00:00:00
2016-03-09 00:00:00
2 Test Report Test Report
Adobe Acrobat PDF (543 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (511 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 RF Exposure RF Exposure Info
Adobe Acrobat PDF (125 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 Manual Users Manual
Adobe Acrobat PDF (82 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 Label Information ID Label/Location Info
Adobe Acrobat PDF (138 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 Modular Approval Letter Cover Letter(s)
Adobe Acrobat PDF (395 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 FCC Cover Letter Cover Letter(s)
Adobe Acrobat PDF (13 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 Confidentiality Request Cover Letter(s)
Adobe Acrobat PDF (257 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 Agency Agreement Cover Letter(s)
Adobe Acrobat PDF (182 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
2 External Photos External Photos
Adobe Acrobat PDF (28 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00

APP # 1 (2015-09-11)

App # Document Type Submitted
Available
1 Internal Photos Internal Photos
Adobe Acrobat PDF (556 kB)
2015-09-11 00:00:00
2016-03-09 00:00:00
1 Test Report Test Report
Adobe Acrobat PDF (3436 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (511 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 RF Exposure RF Exposure Info
Adobe Acrobat PDF (125 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 Manual Users Manual
Adobe Acrobat PDF (82 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 Label Information ID Label/Location Info
Adobe Acrobat PDF (138 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 Modular Approval Letter Cover Letter(s)
Adobe Acrobat PDF (395 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 FCC Cover Letter Cover Letter(s)
Adobe Acrobat PDF (13 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 Confidentiality Request Cover Letter(s)
Adobe Acrobat PDF (257 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 Agency Agreement Cover Letter(s)
Adobe Acrobat PDF (182 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 External Photos External Photos
Adobe Acrobat PDF (28 kB)
2015-09-11 00:00:00
2015-09-11 00:00:00
1 Block Diagram Block Diagram
Adobe Acrobat PDF (579 kB)
2015-09-11 00:00:00
N/A

APP # 2 (2015-09-11)

App # Document Type Submitted
Available
2 Theory of Operation Operational Description
Adobe Acrobat PDF (414 kB)
2015-09-11 00:00:00
N/A

APP # 3 (2018-08-03)

App # Document Type Submitted
Available
3 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (2021 kB)
2018-08-03 00:00:00
2019-01-30 00:00:00

APP # 2 (2015-09-11)

App # Document Type Submitted
Available
2 Schematics Schematics
Adobe Acrobat PDF (830 kB)
2015-09-11 00:00:00
N/A

APP # 3 (2018-08-03)

App # Document Type Submitted
Available
3 Theory of Operation - Third Party Operational Description
Adobe Acrobat PDF (144 kB)
2018-08-03 00:00:00
N/A

APP # 1 (2015-09-11)

App # Document Type Submitted
Available
1 Theory of Operation Operational Description
Adobe Acrobat PDF (414 kB)
2015-09-11 00:00:00
N/A
1 Schematics Schematics
Adobe Acrobat PDF (830 kB)
2015-09-11 00:00:00
N/A

APP # 2 (2015-09-11)

App # Document Type Submitted
Available
2 Block Diagram Block Diagram
Adobe Acrobat PDF (579 kB)
2015-09-11 00:00:00
N/A

APP # 3 (2018-08-03)

App # Document Type Submitted
Available
3 Theory of Operation Operational Description
Adobe Acrobat PDF (342 kB)
2018-08-03 00:00:00
N/A
3 Manual Users Manual
Adobe Acrobat PDF (102 kB)
2018-08-03 00:00:00
2019-01-30 00:00:00

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Elster Solutions, LLC
FCC Registration Number (FRN): 0008634834
Alphanumeric FCC ID: QZCREXUA
Unique Application Identifier: WzffNs0sl3+D33P8U7C+Uw==
Line one: 208 S. Rogers Lane
City: Raleigh
State: North Carolina
Country: United States
Zip Code: 27610

TCB Information
TCB Application Email Address: jwoods@acstestlab.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QZC
Product Code: -REXUA

Person at the applicant's address to receive grant or for contact
Name: John - Holt
Title: Principal Engineer
Telephone Number: 919-250-5557 Extension:
Fax Number: 919-250-5486
Email: john.holt@us.elster.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/09/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): REXUA Printed Circuit Board Assembly

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Advanced Compliance Solutions, Inc.
First Name:   Randy
Last Name:   Abernathy
Telephone Number: 770-831-8048 Extension:
Fax Number:  770-831-8598
E-mail:  rabernathy@acstestlab.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular approval. Power listed is conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as described in this filing or in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Sam Wismer
Title of authorized signature:  Vice President, Technology

Complete items below if agent signs the application:

Firm Name:  Advanced Compliance Solutions, Inc.
Name:  Sam Sam Sam
Line 1:  Sam
Line 2:  Sam
P.O. Box:  Sam
City:  Sam
State:  Sam
Country:  Sam
Zip Code:  Sam

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Elster Solutions, LLC
FCC Registration Number (FRN): 0008634834
Alphanumeric FCC ID: QZCREXUA
Unique Application Identifier: HHE0wK2+JNdW/IX/JfxvBw==
Line one: 208 S. Rogers Lane
City: Raleigh
State: North Carolina
Country: United States
Zip Code: 27610

TCB Information
TCB Application Email Address: jwoods@acstestlab.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QZC
Product Code: -REXUA

Person at the applicant's address to receive grant or for contact
Name: John - Holt
Title: Principal Engineer
Telephone Number: 919-250-5557 Extension:
Fax Number: 919-250-5486
Email: john.holt@us.elster.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/09/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): REXUA Printed Circuit Board Assembly

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Advanced Compliance Solutions, Inc.
First Name:   Randy
Last Name:   Abernathy
Telephone Number: 770-831-8048 Extension:
Fax Number:  770-831-8598
E-mail:  rabernathy@acstestlab.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular approval. Power listed is conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as described in this filing or in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Device must operate with a source-based time-averaged duty cycle not to exceed 66% controlled by software or firmware.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Sam Wismer
Title of authorized signature:  Vice President, Technology

Complete items below if agent signs the application:

Firm Name:  Advanced Compliance Solutions, Inc.
Name:  Sam Sam Sam
Line 1:  Sam
Line 2:  Sam
P.O. Box:  Sam
City:  Sam
State:  Sam
Country:  Sam
Zip Code:  Sam

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Elster Solutions, LLC
FCC Registration Number (FRN): 0008634834
Alphanumeric FCC ID: QZCREXUA
Unique Application Identifier: Wd3HbOKmFabpNzKCnttf/w==
Line one: 208 S. Rogers Lane
City: Raleigh
State: North Carolina
Country: United States
Zip Code: 27610

TCB Information
TCB Application Email Address: jeff.woods@tuvsud.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: QZC
Product Code: -REXUA

Person at the applicant's address to receive grant or for contact
Name: John - Holt
Title: Principal Engineer
Telephone Number: 919-250-5557 Extension:
Fax Number: 919-250-5486
Email: john.holt@us.elster.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   01/30/2019
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): REXUA Printed Circuit Board Assembly

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   TUV SUD America, Inc.
First Name:   Sam
Last Name:   Wismer
Telephone Number: 678-341-5924 Extension:
Fax Number:  678-341-5924
E-mail:  swismer@tuvam.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular approval. Power listed is conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as described in this filing or in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Class II Change to add new data rates as described in this filing.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  John Holt
Title of authorized signature:  Principal Engineer

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 09/11/2015

Application Dated: 09/11/2015
Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-REXUA
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Digital Transmission System
Notes: REXUA Printed Circuit Board Assembly
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2470.0 0.105  

Single Modular approval. Power listed is conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as described in this filing or in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Device must operate with a source-based time-averaged duty cycle not to exceed 66% controlled by software or firmware.

>
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
10 Centennial Drive
Peabody, MA 01960
Date of Grant: 08/03/2018

Application Dated: 08/03/2018
Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-REXUA
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: REXUA Printed Circuit Board Assembly
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.85  
15C 902.3  -  927.8 0.427  

Single Modular approval. Power listed is conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as described in this filing or in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Change to add new data rates as described in this filing.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
United States
  Date of Grant: 08/03/2018

Application Dated: 08/03/2018
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-REXUA
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: REXUA Printed Circuit Board Assembly
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.85  
15C 902.3  -  927.8 0.427  

Single Modular approval. Power listed is conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as described in this filing or in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Change to add new data rates as described in this filing.



Mail To:


EA849451
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Advanced Compliance Solutions, Inc.
5015 B.U. Bowman Drive
Buford, GA 30518
Date of Grant: 09/11/2015

Application Dated: 09/11/2015
Elster Solutions, LLC
208 S. Rogers Lane
Raleigh, NC 27610
 
Attention: John Holt , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZC-REXUA
Name of Grantee:  Elster Solutions, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: REXUA Printed Circuit Board Assembly
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.85  

Single Modular approval. Power listed is conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as described in this filing or in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

>

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details