FCC ID QZC-SNREM
SNREM Printed Circuit Board Assembly
by Elster Solutions, LLC
Grantee Code: QZC Product Code: SNREM
Latest application date: 2020-01-21
FCC ID Device Details
| FCC ID | QZC-SNREM |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QZC |
| Product Code | SNREM |
| Applicant Business | Elster Solutions, LLC 🇺🇸 |
| Related Domains |  us.elster.com |
| Equipment Class | SNREM Printed Circuit Board Assembly |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.4-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2020-01-21 |
| 902.4-927.6 MHz | Original Equipment | 2018-08-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual - Gas Meter | Users Manual | 2020-01-21 | PDF 1.1 MB |
| Manual - Water Pit | Users Manual | 2020-01-21 | PDF 882.9 KB |
| Manual | Users Manual | 2019-02-16 | PDF 281.7 KB |
| Internal Photos | Internal Photos | 2019-02-16 | PDF 441.2 KB |
| External Photos | External Photos | 2020-01-21 | PDF 1.3 MB |
| External Photos | External Photos | 2018-08-20 | PDF 478.6 KB |
| Label Information | ID Label/Location Info | 2018-08-20 | PDF 161.2 KB |
| Test Setup Photos | Test Setup Photos | 2020-01-21 | PDF 501.9 KB |
| Test Setup Photos | Test Setup Photos | 2018-08-20 | PDF 3.7 MB |
| Test Report | Test Report | 2020-01-21 | PDF 465.8 KB |
| Test Report | Test Report | 2018-08-20 | PDF 3.6 MB |
| Agency Agreement | Cover Letter(s) | 2020-01-21 | PDF 12.3 KB |
| Confidentiality Request | Cover Letter(s) | 2018-08-20 | PDF 20.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2018-08-20 | PDF 68.6 KB |
| RF Exposure | RF Exposure Info | 2020-01-21 | PDF 23.1 KB |
| RF Exposure | RF Exposure Info | 2018-08-20 | PDF 58.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 94.4 KB | |
| Schematics Metadata only | Schematics | PDF 356.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 540.4 KB |
Application Information
| Application ID | n4LD8e74p8i2StizrIco7A== |
|---|---|
| Final Action Date | 2020-01-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008634834 |
| Model | SNREM |
| Frequency Range | 902.4-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | SNREM Printed Circuit Board Assembly |
| Responsible Party | John - Holt, Principal Engineer, john.holt@us.elster.com , 919-250-5557 |
| Agent | Marlene Marlene Marlene, TUV SUD America |
| Test Firm | William Elliott, TUV SUD America, Inc., William.Elliott@tuvsud.com  , 9785732528 |
| TCB Email | jeff.woods@tuvsud.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device operates in both 25 and 64 channel modes. In 64 channel mode, device must operate with a source-based, time-averaged duty cycle not to exceed 50%; controlled via software or firmware. Class II Change to add two new hosts to the LMA as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| n4LD8e74p8i2StizrIco7A== | 2020-01-21 | Class II permissive change or modification of presently authorized equipment |
| 8lYBMjfZZsYtwPgWXTMEdQ== | 2018-08-20 | Original Equipment |
Grants
TCB Grant - Application n4LD8e74p8i2StizrIco7A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/21/2020 Application Dated: 01/21/2020 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-SNREM |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SNREM Printed Circuit Board Assembly |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.236 | |||
| 15C | 902.4 - 927.6 | 0.503 |
| Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device operates in both 25 and 64 channel modes. In 64 channel mode, device must operate with a source-based, time-averaged duty cycle not to exceed 50%; controlled via software or firmware. Class II Change to add two new hosts to the LMA as described in this filing. |
EAS Grant - Application n4LD8e74p8i2StizrIco7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 01/21/2020 Application Dated: 01/21/2020 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-SNREM |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SNREM Printed Circuit Board Assembly |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.236 | |||
| 15C | 902.4 - 927.6 | 0.503 |
| Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device operates in both 25 and 64 channel modes. In 64 channel mode, device must operate with a source-based, time-averaged duty cycle not to exceed 50%; controlled via software or firmware. Class II Change to add two new hosts to the LMA as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 08/20/2018 Application Dated: 08/20/2018 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-SNREM |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SNREM Printed Circuit Board Assembly |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.236 | |||
| 15C | 902.4 - 927.6 | 0.503 |
| Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device operates in both 25 and 64 channel modes. In 64 channel mode device must operate with a source-based, time-averaged duty cycle not to exceed 50%; controlled via software or firmware. |
EAS Grant - Application 8lYBMjfZZsYtwPgWXTMEdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 08/20/2018 Application Dated: 08/20/2018 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZC-SNREM |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SNREM Printed Circuit Board Assembly |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.236 | |||
| 15C | 902.4 - 927.6 | 0.503 |
| Limited Modular Approval. Power listed is conducted. This device is limited to the host described in this filing. This grant is valid only when the device is installed by the grantee or contractors employed by the grantee who are instructed to ensure that the end-user has no manual instructions to remove or install the device. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device operates in both 25 and 64 channel modes. In 64 channel mode device must operate with a source-based, time-averaged duty cycle not to exceed 50%; controlled via software or firmware. |
| Mail To: |