FCC ID QZCWWIC3EV
Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters
by Elster Solutions, LLC
Grantee Code: QZC Product Code: WWIC3EV
Latest application date: 2015-06-24
FCC ID Device Details
| FCC ID | QZCWWIC3EV |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QZC |
| Product Code | WWIC3EV |
| Applicant Business | Elster Solutions, LLC 🇺🇸 |
| Related Domains |  us.elster.com |
| Equipment Class | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Test Firm | PCTEST Engineering Laboratory, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.8-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2015-06-24 |
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2015-06-24 |
| 824.7-848.31 MHz | Original Equipment | 2013-12-26 |
| 902.8-927.6 MHz | Original Equipment | 2013-12-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual 1 | Users Manual | 2014-06-24 | PDF 327.6 KB |
| Users Manual 2 | Users Manual | 2014-06-24 | PDF 312.1 KB |
| Intermal Photographs 2 | Internal Photos | 2014-06-24 | PDF 435.9 KB |
| Internal Photographs 1 | Internal Photos | 2014-06-24 | PDF 230.3 KB |
| External Photographs | External Photos | 2014-06-24 | PDF 203.4 KB |
| FCC ID Label and Location | ID Label/Location Info | 2013-12-26 | PDF 125.1 KB |
| Test Setup Photos | Test Setup Photos | 2015-12-21 | PDF 416.4 KB |
| Test Setup Photographs | Test Setup Photos | 2014-06-24 | PDF 254.1 KB |
| Test Setup Photographs | Test Setup Photos | 2014-06-24 | PDF 186.9 KB |
| Test Report | Test Report | 2015-06-24 | PDF 691.1 KB |
| Test Report | Test Report | 2015-06-24 | PDF 650.4 KB |
| Test Report | Test Report | 2013-12-26 | PDF 1.6 MB |
| Test Report | Test Report | 2013-12-26 | PDF 1.7 MB |
| Authorization Letter | Attestation Statements | 2015-06-24 | PDF 176.9 KB |
| Authorization Letter | Attestation Statements | 2015-06-24 | PDF 177.4 KB |
| Authorization Letter | Attestation Statements | 2013-12-26 | PDF 184.1 KB |
| Class II Cover Letter | Cover Letter(s) | 2015-06-24 | PDF 194 KB |
| Class II Cover Letter | Cover Letter(s) | 2015-06-24 | PDF 194.4 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2015-06-24 | PDF 173.7 KB |
| Short Term Confidentiality Request Letter | Cover Letter(s) | 2015-06-24 | PDF 180 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2013-12-26 | PDF 365.3 KB |
| Cover Letter | Cover Letter(s) | 2013-12-26 | PDF 195.2 KB |
| MPE Report | RF Exposure Info | 2013-12-26 | PDF 124.8 KB |
| Schematics Metadata only | Schematics | PDF 1.1 MB | |
| Schematics Metadata only | Schematics | PDF 707.6 KB |
Application Information
| Application ID | XZH5njwkn6d3E+dmbCa+3A== |
|---|---|
| Final Action Date | 2015-06-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008634834 |
| Model | WWIC3EV |
| Frequency Range | 902.8-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Responsible Party | John - Holt, Principal Engineer, john.holt@us.elster.com , 919-250-5557 |
| Technical Contact | Randy Ortanez, PCTEST Engineering Laboratory, Inc., tcb@pctestlab.com  , 410-290-6652 |
| Test Firm | Randy Ortanez, PCTEST Engineering Laboratory, Inc., lab@pctestlab.com , 410-290-6652 |
| TCB Email | tcb@pctestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/21/2015 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installation, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| XZH5njwkn6d3E+dmbCa+3A== | 2015-06-24 | Class II permissive change or modification of presently authorized equipment |
| 1CDZtxEmr2POATGxlY2GKw== | 2015-06-24 | Class II permissive change or modification of presently authorized equipment |
| fxRr6w8fb0+DyfGjJT6ZVg== | 2013-12-26 | Original Equipment |
| CqfIz4XHl/52IZxsyfkYqQ== | 2013-12-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XZH5njwkn6d3E+dmbCa+3A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 06/24/2015 Application Dated: 06/24/2015 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.8 - 927.6 | 0.14 |
| Class II Permissive Change. Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installation, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application XZH5njwkn6d3E+dmbCa+3A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 06/24/2015 Application Dated: 06/24/2015 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.8 - 927.6 | 0.14 |
| Class II Permissive Change. Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installation, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 |
Date of Grant: 12/26/2013 Application Dated: 12/26/2013 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.305 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.251 | 2.5 PM | 1M27F9W |
| Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installations, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. The maximum gains of the external antennas approved for use with this device, including associated circuitry/cable losses, may not exceed the values shown in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application fxRr6w8fb0+DyfGjJT6ZVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 12/26/2013 Application Dated: 12/26/2013 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.305 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.251 | 2.5 PM | 1M27F9W |
| Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installations, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. The maximum gains of the external antennas approved for use with this device, including associated circuitry/cable losses, may not exceed the values shown in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 |
Date of Grant: 12/26/2013 Application Dated: 12/26/2013 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.8 - 927.6 | 0.14 |
| Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installations, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application CqfIz4XHl/52IZxsyfkYqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 12/26/2013 Application Dated: 12/26/2013 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.8 - 927.6 | 0.14 |
| Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installations, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 06/24/2015 Application Dated: 06/24/2015 |
| Elster Solutions, LLC |
| 208 S. Rogers Lane |
| Raleigh, NC 27610 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.305 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.251 | 2.5 PM | 1M27F9W |
| Class II Permissive Change. Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installations, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. The maximum gains of the external antennas approved for use with tis device, including associated circuitry/cable losses, may not exceed the values shown in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 1CDZtxEmr2POATGxlY2GKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elster Solutions, LLC 208 S. Rogers Lane Raleigh, NC 27610 United States |
Date of Grant: 06/24/2015 Application Dated: 06/24/2015 |
| Attention: John Holt , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZCWWIC3EV |
| Name of Grantee: | Elster Solutions, LLC |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Electric Meter with Multi-band CDMA and Frequency Hopping Transmitters |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.305 | 2.5 PM | 1M27F9W | |
| 24E | 1851.25 - 1908.75 | 0.251 | 2.5 PM | 1M27F9W |
| Class II Permissive Change. Output power listed is conducted. This device is approved for use in the electric meter described in the filing. Although intended for fixed installations, this device is approved as a mobile transmitter with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. The maximum gains of the external antennas approved for use with tis device, including associated circuitry/cable losses, may not exceed the values shown in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
| Mail To: |