FCC ID QZE100
2.4GHz/5GHz Mini-PCI Module for Access Point
by Juniper Networks, Inc.
Grantee Code: QZE Product Code: 100
Latest application date: 2004-09-10
FCC ID Device Details
| FCC ID | QZE100 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | QZE |
| Product Code | 100 |
| Applicant Business | Juniper Networks, Inc. 🇺🇸 |
| Related Domains |  juniper.net |
| Equipment Class | 2.4GHz/5GHz Mini-PCI Module for Access Point |
| Test Firm | Nemko USA, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2004-09-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-09-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-05-25 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-10-06 |
| 2412-2462 MHz | Original Equipment | 2003-07-09 |
| 5180-5240 MHz | Original Equipment | 2003-07-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation Guide | Users Manual | 2004-09-10 | PDF 1.1 MB |
| Regulatory Information | Users Manual | 2004-09-10 | PDF 405.2 KB |
| User Manual | Users Manual | 2004-05-25 | PDF 1.4 MB |
| User Manual | Users Manual | 2003-07-09 | PDF 594.4 KB |
| EUT photos | Internal Photos | 2004-09-10 | PDF 708.9 KB |
| Additional Internal Photos | Internal Photos | 2003-07-09 | PDF 636.6 KB |
| Additional internal photos | Internal Photos | 2003-07-09 | PDF 636.6 KB |
| Antenna Location | Internal Photos | 2003-07-09 | PDF 172 KB |
| Internal Photos | Internal Photos | 2003-07-09 | PDF 1.6 MB |
| External Photos | External Photos | 2003-07-09 | PDF 217 KB |
| FCC ID label format and location | ID Label/Location Info | 2003-07-09 | PDF 73.4 KB |
| Label format with one module | ID Label/Location Info | 2003-07-09 | PDF 183.8 KB |
| Label format with two module | ID Label/Location Info | 2003-07-09 | PDF 185 KB |
| Test setup photos | Test Setup Photos | 2004-05-25 | PDF 385.2 KB |
| Test Setup Photos | Test Setup Photos | 2003-10-06 | PDF 357.4 KB |
| Test Setup Photos | Test Setup Photos | 2003-07-09 | PDF 628.9 KB |
| Test Setup Photos | Test Setup Photos | 2003-07-09 | PDF 628.9 KB |
| Test report | Test Report | 2004-09-10 | PDF 334.1 KB |
| Test report | Test Report | 2004-09-10 | PDF 613 KB |
| Test Report | Test Report | 2004-05-25 | PDF 1.7 MB |
| Revised Test Report | Test Report | 2003-10-06 | PDF 1.5 MB |
| DTS Test Report 1 of 2 | Test Report | 2003-07-09 | PDF 1 MB |
| DTS Test Report 2 of 2 | Test Report | 2003-07-09 | PDF 3.5 MB |
| Frequency Stab Test | Test Report | 2003-07-09 | PDF 185 KB |
| UNII Test Report 1 of 2 | Test Report | 2003-07-09 | PDF 2 MB |
| UNII Test Report 2 of 2 | Test Report | 2003-07-09 | PDF 2.8 MB |
| Authority to act as agent | Attestation Statements | 2004-09-10 | PDF 114.1 KB |
| Changes letter | Cover Letter(s) | 2004-09-10 | PDF 44.4 KB |
| Confidentiality request | Cover Letter(s) | 2004-09-10 | PDF 79.6 KB |
| Class II permissive change cover letter | Cover Letter(s) | 2004-05-25 | PDF 1.4 MB |
| TCB Q and A | Cover Letter(s) | 2004-05-25 | PDF 15.7 KB |
| Class II permissive change letter | Cover Letter(s) | 2003-10-06 | PDF 13.2 KB |
| Request for confidentiality letter | Cover Letter(s) | 2003-10-06 | PDF 12 KB |
| TCB Q and A | Cover Letter(s) | 2003-10-06 | PDF 9.7 KB |
| Request for confidentiality letter | Cover Letter(s) | 2003-07-09 | PDF 1.4 MB |
| Request for limited module approval | Cover Letter(s) | 2003-07-09 | PDF 67.7 KB |
| Request for limited module approval | Cover Letter(s) | 2003-07-09 | PDF 67.7 KB |
| TCB Q and A | Cover Letter(s) | 2003-07-09 | PDF 39.6 KB |
| TCB Q and A | Cover Letter(s) | 2003-07-09 | PDF 39.6 KB |
| Antenna specification 1 of 3 | Parts List/Tune Up Info | 2004-05-25 | PDF 124.3 KB |
| Antenna specification 2 of 3 | Parts List/Tune Up Info | 2004-05-25 | PDF 132 KB |
| Antenna specification 3 of 3 | Parts List/Tune Up Info | 2004-05-25 | PDF 135 KB |
| Antenna specification | Parts List/Tune Up Info | 2003-07-09 | PDF 628.2 KB |
| MPE Estimate | RF Exposure Info | 2003-07-09 | PDF 13.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 5.8 KB | |
| Block diagram Metadata only | Block Diagram | PDF 45 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 428 KB | |
| Schematics Metadata only | Schematics | PDF 407.3 KB | |
| Antenna information Metadata only | Operational Description | PDF 45.3 KB | |
| Antenna information Metadata only | Operational Description | PDF 45.3 KB | |
| Theory of operation Metadata only | Operational Description | PDF 808 KB | |
| Theory of operation Metadata only | Operational Description | PDF 210.3 KB |
Application Information
| Application ID | qJ5MFvHHOj49cSVaHxUp6Q== |
|---|---|
| Final Action Date | 2004-09-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004536603 |
| Model | 100 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 2.4GHz/5GHz Mini-PCI Module for Access Point |
| Responsible Party | Mark Gandler, Sr. Manager Compliance Engineering, mgandler@juniper.net , (408) 745-2000 |
| Agent | Alan Alan Alan, Nemko USA, alaudani@nemko.com  , 858-755-5525 |
| Test Firm | Rhonda Saxon, Nemko USA, Inc., Rhonda.Saxon@nemko.com , 858-755-5525 |
| TCB Email | ruby.dulmage@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change filing. Limited Module Approval. Output power listed is conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qJ5MFvHHOj49cSVaHxUp6Q== | 2004-09-10 | Class II permissive change or modification of presently authorized equipment |
| TJB1H+0JdgKFJyaHtT9CKg== | 2004-09-10 | Class II permissive change or modification of presently authorized equipment |
| /k1H8Kf0/C9QauSm3j4Gqw== | 2004-05-25 | Class II permissive change or modification of presently authorized equipment |
| n51M23EsPtWm2z3gn1+Yew== | 2003-10-06 | Class II permissive change or modification of presently authorized equipment |
| ZF8tYs/4Ao1W5/GFi0x2EA== | 2003-07-09 | Original Equipment |
| Hus31iNFE3579q/axfPGOw== | 2003-07-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZF8tYs/4Ao1W5/GFi0x2EA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/09/2003 Application Dated: 07/09/2003 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.203 |
| Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application ZF8tYs/4Ao1W5/GFi0x2EA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 07/09/2003 Application Dated: 07/09/2003 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.203 |
| Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 09/10/2004 Application Dated: 09/10/2004 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module for Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| 36 | 15C | 5745.0 - 5825.0 | 0.203 |
| Class II Permissive Change Filing. Limited Module Approval. Output power listed is conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. When external antennas are used, professional installation is required. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application TJB1H+0JdgKFJyaHtT9CKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 09/10/2004 Application Dated: 09/10/2004 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module for Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| 36 | 15C | 5745.0 - 5825.0 | 0.203 |
| Class II Permissive Change Filing. Limited Module Approval. Output power listed is conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. When external antennas are used, professional installation is required. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 09/10/2004 Application Dated: 09/10/2004 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4GHz/5GHz Mini-PCI Module for Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.015 | |||
| 15E | 5260.0 - 5320.0 | 0.024 |
| Class II Permissive Change filing. Limited Module Approval. Output power listed is conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application qJ5MFvHHOj49cSVaHxUp6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 09/10/2004 Application Dated: 09/10/2004 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4GHz/5GHz Mini-PCI Module for Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5240.0 | 0.015 | |||
| 15E | 5260.0 - 5320.0 | 0.024 |
| Class II Permissive Change filing. Limited Module Approval. Output power listed is conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/06/2003 Application Dated: 10/06/2003 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.203 |
| Added 802.11g modulation in this Class II permissive change filing. Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application n51M23EsPtWm2z3gn1+Yew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 10/06/2003 Application Dated: 10/06/2003 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.203 |
| Added 802.11g modulation in this Class II permissive change filing. Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/09/2003 Application Dated: 07/09/2003 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5180.0 - 5240.0 | 0.015 | ||
| CE | 15E | 5260.0 - 5320.0 | 0.024 |
| Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application Hus31iNFE3579q/axfPGOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 07/09/2003 Application Dated: 07/09/2003 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15E | 5180.0 - 5240.0 | 0.015 | ||
| CE | 15E | 5260.0 - 5320.0 | 0.024 |
| Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/25/2004 Application Dated: 05/25/2004 |
| Juniper Networks, Inc. |
| 1133 Innovation Way |
| Sunnyvale, CA 94089 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CE | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.203 |
| Limited module approval. User installation is prohibited. In this Class II permissive change filing, three external antennas (6dBi, 7dBi section and 10 dBi directional) are added for use in 2.4GHz band only. When external antennas are used, professional installation is required. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filings. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented under this FCC ID number, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application /k1H8Kf0/C9QauSm3j4Gqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 United States |
Date of Grant: 05/25/2004 Application Dated: 05/25/2004 |
| Attention: Mark Gandler , Sr. Manager Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | QZE100 |
| Name of Grantee: | Juniper Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz/5GHz Mini-PCI Module For Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CE | 15C | 2412.0 - 2462.0 | 0.0861 | ||
| CE | 15C | 5745.0 - 5825.0 | 0.203 |
| Limited module approval. User installation is prohibited. In this Class II permissive change filing, three external antennas (6dBi, 7dBi section and 10 dBi directional) are added for use in 2.4GHz band only. When external antennas are used, professional installation is required. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filings. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented under this FCC ID number, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |