FCC ID QZE250

DUAL MODE 2.4GHz/ 5GHz ACCESS POINT

by Juniper Networks, Inc.

Grantee Code: QZE   Product Code: 250
Latest application date: 2006-12-13

FCC ID Device Details

FCC IDQZE250
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQZE
Product Code250
Applicant BusinessJuniper Networks, Inc. 🇺🇸
Related Domains juniper.net
Equipment ClassDUAL MODE 2.4GHz/ 5GHz ACCESS POINT
Test FirmSPORTON International Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2006-12-13
2412-2462 MHzOriginal Equipment2006-12-13

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2006-12-13PDF 2.3 MB
INTERNAL PHOTOSInternal Photos2006-12-13PDF 254.8 KB
EXTERNAL PHOTOSExternal Photos2006-12-13PDF 348.2 KB
LABEL SAMPLE AND LOCATIONID Label/Location Info2006-12-13PDF 72.4 KB
TEST SETUP PHOTOS 1Test Setup Photos2006-12-13PDF 205.2 KB
TEST SETUP PHOTOS 2Test Setup Photos2006-12-13PDF 205.9 KB
TEST REPORT 1Test Report2006-12-13PDF 1.4 MB
TEST REPORT 1Test Report2006-12-13PDF 1.6 MB
TEST REPORT 2Test Report2006-12-13PDF 2.7 MB
TEST REPORT 2Test Report2006-12-13PDF 2.5 MB
TEST REPORT 3Test Report2006-12-13PDF 2.9 MB
CONFIDENTIALITY LETTERCover Letter(s)2006-12-13PDF 70.9 KB
confidentiality letterCover Letter(s)2006-12-13PDF 70.9 KB
MPE REPORTRF Exposure Info2006-12-13PDF 48.9 KB
BLOCK DIAGRAM Metadata onlyBlock DiagramPDF 579.8 KB
SCHEMATICS Metadata onlySchematicsPDF 444.4 KB
OPERATIONAL DESCRIPTION Metadata onlyOperational DescriptionPDF 155.1 KB

Application Information

Application IDqXME978ROnUeFR8WwGS1VQ==
Final Action Date2006-12-13
Application PurposeOriginal Equipment
Applicant FRN0004536603
Model250
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionDUAL MODE 2.4GHz/ 5GHz ACCESS POINT
Responsible PartyMark Gandler, Sr. Manager Compliance Engineering, mgandler@juniper.net , (408) 745-2000
Test FirmKathy Lin, SPORTON International Inc, kathylin@sporton.com.tw , 886-2-2696-2468
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
qXME978ROnUeFR8WwGS1VQ==2006-12-13Original Equipment
5KPLrJaY8aJHBwIQrQqYFQ==2006-12-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.494315CCC
5180-5240 MHz0.024200015ECC
5745-5825 MHz0.266115CCC

Grants

TCB Grant - Application qXME978ROnUeFR8WwGS1VQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/13/2006

Application Dated: 12/11/2006
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
 
Attention: Mark Gandler , Sr. Manager Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZE250
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DUAL MODE 2.4GHz/ 5GHz ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0242  

Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qXME978ROnUeFR8WwGS1VQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
United States
  Date of Grant: 12/13/2006

Application Dated: 12/11/2006
 
Attention: Mark Gandler , Sr. Manager Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZE250
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DUAL MODE 2.4GHz/ 5GHz ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0242  

Power listed is conducted. Operations in the band 5.15-5.25GHz are restricted to indoor use only. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5KPLrJaY8aJHBwIQrQqYFQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/13/2006

Application Dated: 12/11/2006
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
 
Attention: Mark Gandler , Sr. Manager Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZE250
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Digital Transmission System
Notes: DUAL MODE 2.4GHz/ 5GHz ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.4943  
CC 15C 5745.0  -  5825.0 0.2661  

Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 5KPLrJaY8aJHBwIQrQqYFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
United States
  Date of Grant: 12/13/2006

Application Dated: 12/11/2006
 
Attention: Mark Gandler , Sr. Manager Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZE250
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Digital Transmission System
Notes: DUAL MODE 2.4GHz/ 5GHz ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.4943  
CC 15C 5745.0  -  5825.0 0.2661  

Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: