1. FCC ID
  2. QZE
  3. QZEWLA322

FCC ID QZEWLA322

WLA322 Wireles LAN Access Point

by Juniper Networks, Inc.

Grantee Code: QZE   Product Code: WLA322
Latest application date: 2013-10-29

FCC ID Device Details

FCC IDQZEWLA322
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQZE
Product CodeWLA322
Applicant BusinessJuniper Networks, Inc. 🇺🇸
Related Domains juniper.net
Equipment ClassWLA322 Wireles LAN Access Point
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass III permissive change to software defined radio2013-10-29
5180-5280 MHzOriginal Equipment2012-06-11
2412-2462 MHzOriginal Equipment2012-06-11

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2012-07-15PDF 132.3 KB
Regulatory InfoUsers Manual2012-07-15PDF 2.7 MB
Regulatory ManualUsers Manual2012-06-30PDF 2.7 MB
IntInternal Photos2012-07-15PDF 2.4 MB
ExtExternal Photos2012-07-15PDF 669.6 KB
LabelID Label/Location Info2012-06-11PDF 552.1 KB
Test SetupTest Setup Photos2012-07-15PDF 888.3 KB
Test ReportTest Report2013-10-29PDF 4.3 MB
Test ReportTest Report2012-06-11PDF 1.9 MB
Test ReportTest Report2012-06-11PDF 3.6 MB
5600 ot 5650 No Transmit DeclarationCover Letter(s)2013-10-29PDF 16.7 KB
DFS DeclarationCover Letter(s)2013-10-29PDF 16.8 KB
Juniper response EA293679Cover Letter(s)2013-10-29PDF 7.6 KB
Operation to Avoid TDWR DeclarationCover Letter(s)2013-10-29PDF 90.4 KB
PC III RequestCover Letter(s)2013-10-29PDF 17 KB
Uniform Spreading DeclarationCover Letter(s)2013-10-29PDF 16.6 KB
Agent AuthorizationCover Letter(s)2012-06-11PDF 155.1 KB
Confid RequestCover Letter(s)2012-06-11PDF 18.3 KB
STC RequestCover Letter(s)2012-06-11PDF 153 KB
STC Request r2Cover Letter(s)2012-06-11PDF 153 KB
MPERF Exposure Info2013-10-29PDF 34.1 KB
MPERF Exposure Info2012-06-11PDF 17.2 KB

Application Information

Application IDsKCwZHkscbXTbtQCAOPrpQ==
Final Action Date2013-10-29
Application PurposeClass III permissive change to software defined radio
Applicant FRN0008645913
ModelWLA322
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWLA322 Wireles LAN Access Point
Responsible PartyAgnes Fu, Compliance Manager, agnesfu@juniper.net , (408) 745-2000
Technical ContactAgnes Fu, Juniper Networks, agnesfu@juniper.net , (408)7452000
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationNo
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis device has 20 MHz and 40 MHz BW modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.

Applications

Application IDDatePurpose
sKCwZHkscbXTbtQCAOPrpQ==2013-10-29Class III permissive change to software defined radio
hyFPSE4jinWGPrUvseERVA==2012-06-11Original Equipment
EoQfez4Fzevnvbg6tF/vEA==2012-06-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.61515CCC
2422-2452 MHz0.59315CCC
5180-5280 MHz0.0515ECC
5180-5240 MHz0.0515ECC
5190-5230 MHz0.0515ECC
5260-5320 MHz0.12315ECC
5500-5580 MHz0.14515ECC
5600-5700 MHz0.14515ECC
5745-5825 MHz0.96215CCC
5755-5795 MHz0.8315CCC

Grants

TCB Grant - Application sKCwZHkscbXTbtQCAOPrpQ==

This application does not exist.

EAS Grant - Application sKCwZHkscbXTbtQCAOPrpQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Juniper Networks, Inc.
1194 N. Mathilda Ave
Sunnyvale, CA 94089
United States 		  Date of Grant: 10/29/2013

Application Dated: 11/30/2012
 
Attention: Agnes Fu , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZEWLA322
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLA322 Wireles LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.05  
CC 15E 5260.0  -  5320.0 0.123  
CC 15E 5500.0  -  5580.0 0.145  
CC 15E 5600.0  -  5700.0 0.145  

This device has 20 MHz and 40 MHz BW modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hyFPSE4jinWGPrUvseERVA==

Mail To:
Gordon Hurst, President
MiCOM Labs
440 Boulder Court Suite 200
Pleasanton, CA 94566
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 06/11/2012

Application Dated: 06/08/2012
Juniper Networks, Inc.
1194 N. Mathilda Ave
Sunnyvale, CA 94089
 
Attention: Agnes Fu , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZEWLA322
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLA322 Wireless LAN Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5280.0 0.05  
CC 15E 5190.0  -  5230.0 0.05  

Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as a 2x2 MIMO, as described within this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application hyFPSE4jinWGPrUvseERVA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Juniper Networks, Inc.
1194 N. Mathilda Ave
Sunnyvale, CA 94089
United States 		  Date of Grant: 06/11/2012

Application Dated: 06/08/2012
 
Attention: Agnes Fu , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZEWLA322
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLA322 Wireless LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5280.0 0.05  
CC 15E 5190.0  -  5230.0 0.05  

Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as a 2x2 MIMO, as described within this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EoQfez4Fzevnvbg6tF/vEA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
 Date of Grant: 06/11/2012

Application Dated: 06/08/2012
Juniper Networks, Inc.
1194 N. Mathilda Ave
Sunnyvale, CA 94089
 
Attention: Agnes Fu , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZEWLA322
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Digital Transmission System
Notes: WLA322 Wireless LAN Acces Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.615  
CC 15C 2422.0  -  2452.0 0.593  
CC 15C 5745.0  -  5825.0 0.962  
CC 15C 5755.0  -  5795.0 0.83  

Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as a 2x2 MIMO, as described within this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EoQfez4Fzevnvbg6tF/vEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Juniper Networks, Inc.
1194 N. Mathilda Ave
Sunnyvale, CA 94089
United States 		  Date of Grant: 06/11/2012

Application Dated: 06/08/2012
 
Attention: Agnes Fu , Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QZEWLA322
Name of Grantee:  Juniper Networks, Inc.
Equipment Class: Digital Transmission System
Notes: WLA322 Wireless LAN Acces Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.615  
CC 15C 2422.0  -  2452.0 0.593  
CC 15C 5745.0  -  5825.0 0.962  
CC 15C 5755.0  -  5795.0 0.83  

Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as a 2x2 MIMO, as described within this filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: