FCC ID R3Y-STH-ETH200
Home Automation Gateway
by SmartThings, Inc.
Grantee Code: R3Y Product Code: STHETH200
Latest application date: 2015-06-12
FCC ID Device Details
| FCC ID | R3Y-STH-ETH200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R3Y |
| Product Code | STHETH200 |
| Applicant Business | SmartThings, Inc. 🇺🇸 |
| Related Domains |  smartthings.com |
| Equipment Class | Home Automation Gateway |
| Test Firm | Bay Area Compliance Laboratories Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-06-12 |
| 2402-2480 MHz | Original Equipment | 2015-03-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2015-09-26 | PDF 361.5 KB |
| Int Photos | Internal Photos | 2015-12-09 | PDF 100.1 KB |
| Int Photos | Internal Photos | 2015-09-26 | PDF 100.2 KB |
| Ext Photos | External Photos | 2015-12-09 | PDF 170.9 KB |
| Ext Photos | External Photos | 2015-09-26 | PDF 170.9 KB |
| FCC ID Label | ID Label/Location Info | 2015-03-30 | PDF 110.2 KB |
| Setup Photos | Test Setup Photos | 2015-12-09 | PDF 611 KB |
| Setup Photos | Test Setup Photos | 2015-09-26 | PDF 1 MB |
| Test Report BLE | Test Report | 2015-06-12 | PDF 179.2 KB |
| Test Report ZigBee | Test Report | 2015-06-12 | PDF 179 KB |
| Test Report BLE | Test Report | 2015-03-30 | PDF 442.2 KB |
| Test Report ZigBee | Test Report | 2015-03-30 | PDF 442.7 KB |
| CIIPC Letter | Cover Letter(s) | 2015-06-12 | PDF 358.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2015-06-12 | PDF 375.2 KB |
| POA | Cover Letter(s) | 2015-06-12 | PDF 1.1 MB |
| Confidentiality Letter | Cover Letter(s) | 2015-03-30 | PDF 1.1 MB |
| Block Diagram Metadata only | Block Diagram | PDF 47 KB | |
| Schematics Metadata only | Schematics | PDF 393.5 KB | |
| Circuit Description Metadata only | Operational Description | PDF 33.8 KB |
Application Information
| Application ID | xeZxzTcVYRaKY0HrTNBS7A== |
|---|---|
| Final Action Date | 2015-06-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022171870 |
| Model | STH-ETH200 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Home Automation Gateway |
| Responsible Party | Andrew Brooks, Chief Operating Officer, andrew@smartthings.com , 480-235-7195 |
| Test Firm | Lisa Tang, Bay Area Compliance Laboratories Corporation, lisat@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/09/2015 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module may be collocated with the following module: FCC ID: D87-ZM5304-U. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xeZxzTcVYRaKY0HrTNBS7A== | 2015-06-12 | Class II permissive change or modification of presently authorized equipment |
| bfOjLy4n4Sga4/g227R1GQ== | 2015-03-30 | Original Equipment |
Grants
TCB Grant - Application xeZxzTcVYRaKY0HrTNBS7A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 06/12/2015 Application Dated: 06/12/2015 |
| SmartThings, Inc. |
| 1000 Potomac St. NW |
| Suite 120 |
| Washington, DC 20007 |
| Attention: Andrew Brooks , Chief Operating Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R3Y-STH-ETH200 |
| Name of Grantee: | SmartThings, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Home Automation Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2470.0 | 0.023 | |||
| 15C | 2402.0 - 2480.0 | 0.0005 |
| Class II Permissive Change described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module may be collocated with the following module: FCC ID: D87-ZM5304-U. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application xeZxzTcVYRaKY0HrTNBS7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SmartThings, Inc. 1000 Potomac St. NW Suite 120 Washington, DC 20007 United States |
Date of Grant: 06/12/2015 Application Dated: 06/12/2015 |
| Attention: Andrew Brooks , Chief Operating Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R3Y-STH-ETH200 |
| Name of Grantee: | SmartThings, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Home Automation Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2470.0 | 0.023 | |||
| 15C | 2402.0 - 2480.0 | 0.0005 |
| Class II Permissive Change described in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module may be collocated with the following module: FCC ID: D87-ZM5304-U. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 03/30/2015 Application Dated: 03/30/2015 |
| SmartThings, Inc. |
| 1000 Potomac St. NW |
| Suite 120 |
| Washington, DC 20007 |
| Attention: Andrew Brooks , Chief Operating Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R3Y-STH-ETH200 |
| Name of Grantee: | SmartThings, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Home Automation Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2470.0 | 0.023 | |||
| 15C | 2402.0 - 2480.0 | 0.0005 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module may be collocated with the following module: FCC ID: D87-ZM5304-U. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application bfOjLy4n4Sga4/g227R1GQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SmartThings, Inc. 1000 Potomac St. NW Suite 120 Washington, DC 20007 United States |
Date of Grant: 03/30/2015 Application Dated: 03/30/2015 |
| Attention: Andrew Brooks , Chief Operating Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R3Y-STH-ETH200 |
| Name of Grantee: | SmartThings, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Home Automation Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2470.0 | 0.023 | |||
| 15C | 2402.0 - 2480.0 | 0.0005 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module may be collocated with the following module: FCC ID: D87-ZM5304-U. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |