FCC ID R4R-AIRT700UMPC

Ultra Mobile PC / mX UMPC

by Amtek System Co., Ltd.

Grantee Code: R4R   Product Code: AIRT700UMPC
Latest application date: 2007-06-21

FCC ID Device Details

FCC IDR4R-AIRT700UMPC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeR4R
Product CodeAIRT700UMPC
Applicant BusinessAmtek System Co., Ltd. 🇹🇼
Related Domains amtek.com.tw
Equipment ClassUltra Mobile PC / mX UMPC
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-06-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2007-06-21
2412-2462 MHzOriginal Equipment2006-04-04
2402-2480 MHzOriginal Equipment2006-04-04

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2006-04-04PDF 1.8 MB
Internal PhotosInternal Photos2007-06-21PDF 3.6 MB
comparison photosInternal Photos2007-06-21PDF 998.3 KB
Internal PhotosInternal Photos2006-04-04PDF 3.2 MB
Internal PhotosInternal Photos2006-04-04PDF 3 MB
External PhotosExternal Photos2007-06-21PDF 488.2 KB
External PhotosExternal Photos2006-04-04PDF 523.5 KB
ID LabelID Label/Location Info2006-04-04PDF 220.3 KB
Setup PhotosTest Setup Photos2007-06-21PDF 338.2 KB
Setup PhotosTest Setup Photos2007-06-21PDF 338 KB
Test Setup PhotosTest Setup Photos2006-04-04PDF 477.9 KB
Test ReportTest Report2007-06-21PDF 2.8 MB
Test ReportTest Report2007-06-21PDF 2.8 MB
Test ReportTest Report2006-04-04PDF 2.7 MB
Authorization LetterCover Letter(s)2007-06-21PDF 2 MB
Class II Permissive Change LetterCover Letter(s)2007-06-21PDF 1.9 MB
Request for ConfidentialityCover Letter(s)2007-06-21PDF 62.4 KB
Authorization LetterCover Letter(s)2006-04-04PDF 49.7 KB
BQB DoCCover Letter(s)2006-04-04PDF 101.4 KB
Request for ConfidentialityCover Letter(s)2006-04-04PDF 61.7 KB
TCB Q and ACover Letter(s)2006-04-04PDF 110.3 KB
TCB Q and ACover Letter(s)2006-04-04PDF 110.3 KB
SAR ReportRF Exposure Info2007-06-21PDF 1.5 MB
SAR attachment 1RF Exposure Info2007-06-21PDF 1.3 MB
SAR attachment 2RF Exposure Info2007-06-21PDF 1.5 MB
SAR attachment 3RF Exposure Info2007-06-21PDF 332.7 KB
Antennan BTParts List/Tune Up Info2006-04-04PDF 124.1 KB
Antennan WLANParts List/Tune Up Info2006-04-04PDF 279.8 KB
SAR D2450V2RF Exposure Info2006-04-04PDF 1.7 MB
SAR EX3DV4RF Exposure Info2006-04-04PDF 1.4 MB
SAR PlotRF Exposure Info2006-04-04PDF 2.2 MB
SAR ReportRF Exposure Info2006-04-04PDF 709.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 18.3 KB
Schematics Metadata onlySchematicsPDF 749.4 KB
Schematics BT Metadata onlySchematicsPDF 43.7 KB
Schematics WLAN Metadata onlySchematicsPDF 98.9 KB
Operational Description BT Metadata onlyOperational DescriptionPDF 162.6 KB
Operational Description WLAN Metadata onlyOperational DescriptionPDF 999.5 KB

Application Information

Application IDqb+D+HgoNZvkHFmZXU1NRQ==
Final Action Date2007-06-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010891042
Model-AIRT700UMPC
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionUltra Mobile PC / mX UMPC
Responsible PartyDick Lien, Safety Manager, dick.lien@amtek.com.tw , 886-2-2698-0909
Test FirmKurt Chen, Compliance Certification Services Inc., kurt_chen@ccsemc.com.tw , 886-2-86422071
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Power Output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located Bluetooth operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.955 W/kg.

Applications

Application IDDatePurpose
qb+D+HgoNZvkHFmZXU1NRQ==2007-06-21Class II permissive change or modification of presently authorized equipment
7wm3FEcxO0FoEiVkzOzJ0A==2007-06-21Class II permissive change or modification of presently authorized equipment
xY3KmFXz2L8bAM1KKzXIpg==2006-04-04Original Equipment
smRtGFraMPpLTc6iXpT56A==2006-04-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002270015C28, CC
2412-2462 MHz0.032100015C28, CC

Grants

TCB Grant - Application xY3KmFXz2L8bAM1KKzXIpg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/04/2006

Application Dated: 04/04/2006
Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd.,
His Chih City,
Taipei,
Taiwan
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Ultra Mobile PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.0321  

Power Output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located Bluetooth operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.955 W/kg.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xY3KmFXz2L8bAM1KKzXIpg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd., His Chih City,
Taipei,
Taiwan
  Date of Grant: 04/04/2006

Application Dated: 04/04/2006
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Ultra Mobile PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.0321  

Power Output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located Bluetooth operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.955 W/kg.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application smRtGFraMPpLTc6iXpT56A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/04/2006

Application Dated: 04/04/2006
Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd.,
His Chih City,
Taipei,
Taiwan
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Ultra Mobile PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2402.0  -  2480.0 0.00227  

Power output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located WLAN operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application smRtGFraMPpLTc6iXpT56A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd., His Chih City,
Taipei,
Taiwan
  Date of Grant: 04/04/2006

Application Dated: 04/04/2006
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Ultra Mobile PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2402.0  -  2480.0 0.00227  

Power output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located WLAN operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qb+D+HgoNZvkHFmZXU1NRQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/21/2007

Application Dated: 06/21/2007
Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd.,
His Chih City,
Taipei,
Taiwan
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Ultra Mobile PC / mX UMPC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.0321  

Class II Permissive Change. Power Output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located Bluetooth operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.955 W/kg.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qb+D+HgoNZvkHFmZXU1NRQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd., His Chih City,
Taipei,
Taiwan
  Date of Grant: 06/21/2007

Application Dated: 06/21/2007
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Ultra Mobile PC / mX UMPC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.0321  

Class II Permissive Change. Power Output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located Bluetooth operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.955 W/kg.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA997664

TCB Grant - Application 7wm3FEcxO0FoEiVkzOzJ0A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/21/2007

Application Dated: 06/21/2007
Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd.,
His Chih City,
Taipei,
Taiwan
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Ultra Mobile PC / mX UMPC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2402.0  -  2480.0 0.00227  

Class II Permissive Change. Power output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located WLAN operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7wm3FEcxO0FoEiVkzOzJ0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amtek System Co., Ltd.
14F-11, No.79, Sec.1, Hsin Tai Wu Rd., His Chih City,
Taipei,
Taiwan
  Date of Grant: 06/21/2007

Application Dated: 06/21/2007
 
Attention: Dick Lien , Safety Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R4R-AIRT700UMPC
Name of Grantee:  Amtek System Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Ultra Mobile PC / mX UMPC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2402.0  -  2480.0 0.00227  

Class II Permissive Change. Power output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. Co-located WLAN operating conditions have been evaluated as described in this filing - separate equipment certification is needed for other co-location configurations and RF exposure conditions. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA438576