FCC ID R5SX500F

FM4500F

by Cisco Systems

Grantee Code: R5S   Product Code: X500F
Latest application date: 2022-04-26

FCC ID Device Details

FCC IDR5SX500F
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeR5S
Product CodeX500F
Applicant BusinessCisco Systems 🇺🇸
Related Domains cisco.com sgs.com
Equipment ClassFM4500F
Test FirmSGS Taiwan Ltd. Central RF Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-04-26
4960-4980 MHzOriginal Equipment2022-04-26

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2022-10-12PDF 5.1 MB
Internal PhotosInternal Photos2022-10-12PDF 1.8 MB
External PhotosExternal Photos2022-10-12PDF 1 MB
ID Label/Location InfoID Label/Location Info2022-04-26PDF 1.6 MB
Test Setup PhotosTest Setup Photos2022-10-12PDF 759.9 KB
Test Setup Photos_DFS MasterTest Setup Photos2022-10-12PDF 257.7 KB
Test Setup Photos_DFS SlaveTest Setup Photos2022-10-12PDF 215.6 KB
Test Setup Photos_NIITest Setup Photos2022-10-12PDF 1.1 MB
Test Report_DFS Master_Part 2Test Report2022-04-26PDF 4.1 MB
Test Report_DFS Master_Part 3Test Report2022-04-26PDF 5.3 MB
Test Report_DFS Master_Part 4Test Report2022-04-26PDF 751.2 KB
Test Report_DFS Master_Part1Test Report2022-04-26PDF 3.8 MB
Test Report_DFS SlaveTest Report2022-04-26PDF 1.1 MB
Test Report_NII_Part 1Test Report2022-04-26PDF 3.8 MB
Test Report_NII_Part 2Test Report2022-04-26PDF 2.5 MB
Test Report_Part 1Test Report2022-04-26PDF 3.8 MB
Test Report_Part 2Test Report2022-04-26PDF 4.5 MB
Declaration of authorizationCover Letter(s)2022-04-26PDF 127.4 KB
UNII Declaration LetterCover Letter(s)2022-04-26PDF 122.4 KB
confidentialityCover Letter(s)2022-04-26PDF 53 KB
MPERF Exposure Info2022-04-26PDF 267.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 223.1 KB
Schematics Metadata onlySchematicsPDF 725.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 63.3 KB
Software Security Cover Letter Metadata onlyOperational DescriptionPDF 236.3 KB
Part list (BOM) Metadata onlyParts List/Tune Up InfoPDF 119.9 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 125.3 KB
Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 125.3 KB

Application Information

Application IDycymjYwnMgTyrYev3ZsULw==
Final Action Date2022-04-26
Application PurposeOriginal Equipment
Applicant FRN0022185987
ModelX500F
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionFM4500F
Responsible PartySamuel Kim, Engineering Manager-Operations, samukim@cisco.com , 14085271446
Technical ContactJim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , +886222993279
Non-Technical ContactJim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , +886222993279
Test FirmRyan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/12/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device supports 20/40/80 MHz bandwidth modes. DFS: Master and Slave modes.

Applications

Application IDDatePurpose
ycymjYwnMgTyrYev3ZsULw==2022-04-26Original Equipment
UCk26nlHOIVFdklDE3/CIA==2022-04-26Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
4960-4980 MHz0.266000010.0000000000ppm17M7W7D90YMO
5180-5240 MHz0.0115EMO
5260-5320 MHz0.01715EMO, ND
5500-5700 MHz0.01715EMO, ND
5745-5825 MHz0.06415EMO

Grants

TCB Grant - Application ycymjYwnMgTyrYev3ZsULw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/26/2022

Application Dated: 04/14/2022
Cisco Systems
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Engineering Manager-Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5SX500F
Name of Grantee:  Cisco Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: FM4500F
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.01  
MO ND 15E 5260.0  -  5320.0 0.017  
MO ND 15E 5500.0  -  5700.0 0.017  
MO 15E 5745.0  -  5825.0 0.064  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The device supports 20/40/80 MHz bandwidth modes. DFS: Master and Slave modes.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ycymjYwnMgTyrYev3ZsULw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 04/26/2022

Application Dated: 04/14/2022
 
Attention: Samuel Kim , Engineering Manager-Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5SX500F
Name of Grantee:  Cisco Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: FM4500F
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.01  
MO ND 15E 5260.0  -  5320.0 0.017  
MO ND 15E 5500.0  -  5700.0 0.017  
MO 15E 5745.0  -  5825.0 0.064  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The device supports 20/40/80 MHz bandwidth modes. DFS: Master and Slave modes.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application UCk26nlHOIVFdklDE3/CIA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/26/2022

Application Dated: 04/14/2022
Cisco Systems
125 West Tasman Drive
San Jose, CA 95134-1706
 
Attention: Samuel Kim , Engineering Manager-Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5SX500F
Name of Grantee:  Cisco Systems
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: FM4500F
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4960.0  -  4980.0 0.266 10.0  PM 17M7W7D

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application UCk26nlHOIVFdklDE3/CIA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 04/26/2022

Application Dated: 04/14/2022
 
Attention: Samuel Kim , Engineering Manager-Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5SX500F
Name of Grantee:  Cisco Systems
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: FM4500F
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 90Y 4960.0  -  4980.0 0.266 10.0  PM 17M7W7D

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: