FCC ID R5Y-EZWFM04

802.11b Compact Flash Module

by EAZIX, Inc.

Grantee Code: R5Y   Product Code: EZWFM04
Latest application date: 2006-03-02

FCC ID Device Details

FCC IDR5Y-EZWFM04
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeR5Y
Product CodeEZWFM04
Applicant BusinessEAZIX, Inc. 🇵🇭
Related Domains eazix.com lipman.co.il
Equipment Class802.11b Compact Flash Module
Test FirmHermon Laboratories Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-03-02
2412-2462 MHzOriginal Equipment2004-12-28

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2005-02-11PDF 1.2 MB
Internal PhotosInternal Photos2006-03-02PDF 1.4 MB
Internal PhotosInternal Photos2005-02-11PDF 724.9 KB
External Photos of Host for this ApplicationExternal Photos2006-03-02PDF 33.5 KB
External PhotosExternal Photos2005-02-11PDF 191.3 KB
Label Info for Particular HostID Label/Location Info2006-03-02PDF 222.9 KB
FCC ID Label and LocationID Label/Location Info2004-12-28PDF 59.9 KB
Antenna InfoOperational Description2006-03-02PDF 83.1 KB
Test Photos for this Particular HostTest Setup Photos2006-03-02PDF 126.3 KB
Test Setup PhotosTest Setup Photos2005-02-11PDF 1.2 MB
Test Report RevisedTest Report2006-03-02PDF 782.5 KB
Test ReportTest Report2004-12-28PDF 1.3 MB
Attestation StatementsAttestation Statements2004-12-28PDF 37.8 KB
Confidentiality LettersAttestation Statements2004-12-28PDF 49.6 KB
Authorization to Lipman to Allow PCCover Letter(s)2006-03-02PDF 62.9 KB
Comments 1Cover Letter(s)2006-03-02PDF 64.6 KB
Confidentiality Letter Revised Metadata onlyCover Letter(s)2006-03-02PDF 13.8 KB
Copy of Original GrantCover Letter(s)2006-03-02PDF 96.8 KB
Description of PCCover Letter(s)2006-03-02PDF 14.5 KB
Response 1Cover Letter(s)2006-03-02PDF 8.2 KB
Cover LetterCover Letter(s)2004-12-28PDF 155.4 KB
RF Exposure InfoRF Exposure Info2006-03-02PDF 6.7 KB
MPE DataRF Exposure Info2004-12-28PDF 33.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 68.4 KB
Block Diagram for Host System Tested Metadata onlyBlock DiagramPDF 56.8 KB
Schematics Metadata onlySchematicsPDF 98.1 KB
System Schematics for Host in This Application Metadata onlySchematicsPDF 601.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 125.5 KB

Application Information

Application IDHRfEnQS15yOIF1MDZi6+dQ==
Final Action Date2006-03-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010778322
ModelEZWFM04
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b Compact Flash Module
Responsible PartyArnel Gonzalez Lampa, Senior Division Manager, arnel.lampa@eazix.com , 6327724941
Technical ContactAlex Usoskin, Hermon Laboratories, mail@hermonlabs.com , 972-4628-8001
Non-Technical ContactAvi Galili, Lipman Electronic Engineering Ltd., avi@lipman.co.il , 972 3902 9730
Test FirmAlexander Usoskin, Hermon Laboratories Ltd., mail@hermonlabs.com , 972-4628-8001
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This transmitter must be installed such that a separation distance of at least 20 cm is maintained between the antenna and all persons during normal operation, and must not be co-located or operating in conjunction with any other antenna or transmitter. Certain configurations have been evaluated only for specific host and antenna configurations as shown in applications under this FCC ID. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance.

Applications

Application IDDatePurpose
HRfEnQS15yOIF1MDZi6+dQ==2006-03-02Class II permissive change or modification of presently authorized equipment
k0aWndFTH3eMBfbDkx5o2A==2004-12-28Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.040000015C

Grants

TCB Grant - Application k0aWndFTH3eMBfbDkx5o2A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, LLC
7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 12/28/2004

Application Dated: 12/28/2004
EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave.
Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM04
Name of Grantee:  EAZIX, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b Compact Flash Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04  

Output power listed is conducted. This transmitter must be installed such that a separation distance of at least 20 cm is maintained between the antenna and all persons during normal operation, and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance.

EAS Grant - Application k0aWndFTH3eMBfbDkx5o2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave. Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
  Date of Grant: 12/28/2004

Application Dated: 12/28/2004
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM04
Name of Grantee:  EAZIX, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b Compact Flash Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04  

Output power listed is conducted. This transmitter must be installed such that a separation distance of at least 20 cm is maintained between the antenna and all persons during normal operation, and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance.



TCB Grant - Application HRfEnQS15yOIF1MDZi6+dQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/02/2006

Application Dated: 02/01/2006
EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave.
Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM04
Name of Grantee:  EAZIX, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b Compact Flash Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04  

Output power listed is conducted. This transmitter must be installed such that a separation distance of at least 20 cm is maintained between the antenna and all persons during normal operation, and must not be co-located or operating in conjunction with any other antenna or transmitter. Certain configurations have been evaluated only for specific host and antenna configurations as shown in applications under this FCC ID. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance.

EAS Grant - Application HRfEnQS15yOIF1MDZi6+dQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave. Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
  Date of Grant: 03/02/2006

Application Dated: 02/01/2006
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM04
Name of Grantee:  EAZIX, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11b Compact Flash Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04  

Output power listed is conducted. This transmitter must be installed such that a separation distance of at least 20 cm is maintained between the antenna and all persons during normal operation, and must not be co-located or operating in conjunction with any other antenna or transmitter. Certain configurations have been evaluated only for specific host and antenna configurations as shown in applications under this FCC ID. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance.



Mail To: