FCC ID R5Y-EZWFM06ER

802.11a/b/g WLAN Mini PCI Module

by EAZIX, Inc.

Grantee Code: R5Y   Product Code: EZWFM06ER
Latest application date: 2006-05-26

FCC ID Device Details

FCC IDR5Y-EZWFM06ER
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeR5Y
Product CodeEZWFM06ER
Applicant BusinessEAZIX, Inc. 🇵🇭
Related Domains eazix.com
Equipment Class802.11a/b/g WLAN Mini PCI Module
Test FirmPCTEST Engineering Laboratory, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2006-05-26
5180-5240 MHzOriginal Equipment2006-05-26

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2006-08-24PDF 996.7 KB
Internal PhotosInternal Photos2006-08-24PDF 542.9 KB
External PhotosExternal Photos2006-08-24PDF 261.8 KB
FCC ID Label and LocationID Label/Location Info2006-05-26PDF 158.3 KB
FCC ID Label and LocationID Label/Location Info2006-05-26PDF 167.9 KB
Test Setup PhotosTest Setup Photos2006-08-24PDF 1.8 MB
Test ReportTest Report2006-05-26PDF 2.3 MB
Test ReportTest Report2006-05-26PDF 1.8 MB
Attestation StatementsAttestation Statements2006-05-26PDF 876 KB
Modular Approval LetterAttestation Statements2006-05-26PDF 19.4 KB
MPE DataRF Exposure Info2006-05-26PDF 94.6 KB
MPE ReportRF Exposure Info2006-05-26PDF 94.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 35.4 KB
Schematics Metadata onlySchematicsPDF 209.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 138.9 KB

Application Information

Application IDxLVqdRgbGRX6CvA98CVaog==
Final Action Date2006-05-26
Application PurposeOriginal Equipment
Applicant FRN0010778322
ModelEZWFM06ER
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11a/b/g WLAN Mini PCI Module
Responsible PartyArnel Gonzalez Lampa, Senior Division Manager, arnel.lampa@eazix.com , 6327724941
AgentRandy Randy Randy, PCTEST Engineering Lab., Inc., randy@pctestlab.com , 410-290-6652
Technical ContactRandy Ortanez, PCTEST Engineering Lab., Inc., randy@pctestlab.com , 410-290-6652
Test FirmRandy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com , 4102906652
TCB Emailrandy@pctestlab.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Short-Term Confidentiality Date08/24/2006
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device is authorized for mobile use only. Use in portable exposure conditions (2.1093) requires separate equipment authorization. The maximum antenna gain should not exceed 2 dBi. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance, and may only be marketed to OEM installers.

Applications

Application IDDatePurpose
xLVqdRgbGRX6CvA98CVaog==2006-05-26Original Equipment
CQr5D+65XxOxlfrNpHQqoQ==2006-05-26Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.0415C
5180-5240 MHz0.03215E
5260-5320 MHz0.0415E
5745-5825 MHz0.02515C

Grants

TCB Grant - Application xLVqdRgbGRX6CvA98CVaog==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, LLC
7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 05/26/2006

Application Dated: 05/26/2006
EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave.
Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM06ER
Name of Grantee:  EAZIX, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g WLAN Mini PCI Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04  
15C 5745.0  -  5825.0 0.025  

Output power listed is conducted. This device is authorized for mobile use only. Use in portable exposure conditions (2.1093) requires separate equipment authorization. The maximum antenna gain should not exceed 2 dBi. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance, and may only be marketed to OEM installers.

EAS Grant - Application xLVqdRgbGRX6CvA98CVaog==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave. Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
  Date of Grant: 05/26/2006

Application Dated: 05/26/2006
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM06ER
Name of Grantee:  EAZIX, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g WLAN Mini PCI Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.04  
15C 5745.0  -  5825.0 0.025  

Output power listed is conducted. This device is authorized for mobile use only. Use in portable exposure conditions (2.1093) requires separate equipment authorization. The maximum antenna gain should not exceed 2 dBi. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance, and may only be marketed to OEM installers.



TCB Grant - Application CQr5D+65XxOxlfrNpHQqoQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, LLC
7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 05/26/2006

Application Dated: 05/26/2006
EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave.
Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM06ER
Name of Grantee:  EAZIX, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g WLAN Mini PCI Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.032  
15E 5260.0  -  5320.0 0.04  

Output power listed is conducted. This device is authorized for mobile use only. Use in portable exposure conditions (2.1093) requires separate equipment authorization. The maximum antenna gain should not exceed 2 dBi. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance, and may only be marketed to OEM installers.


EAS Grant - Application CQr5D+65XxOxlfrNpHQqoQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EAZIX, Inc.
Unit 301 Plaz@ Building B, 6530 Northgate Ave. Filinvest Corporate City, Alabang
Muntinlupa, 1770
Philippines
  Date of Grant: 05/26/2006

Application Dated: 05/26/2006
 
Attention: Arnel Lampa , Senior Division Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R5Y-EZWFM06ER
Name of Grantee:  EAZIX, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g WLAN Mini PCI Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.032  
15E 5260.0  -  5320.0 0.04  

Output power listed is conducted. This device is authorized for mobile use only. Use in portable exposure conditions (2.1093) requires separate equipment authorization. The maximum antenna gain should not exceed 2 dBi. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure compliance, and may only be marketed to OEM installers.



Mail To: