FCC ID R68WIPORT

WiPort

by lantronix

Grantee Code: R68   Product Code: WIPORT
Latest application date: 2006-01-26

FCC ID Device Details

FCC IDR68WIPORT
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeR68
Product CodeWIPORT
Applicant Businesslantronix 🇺🇸
Related Domains lantronix.com
Equipment ClassWiPort
Test FirmAEGIS Labs, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-01-26
2412-2462 MHzOriginal Equipment2005-01-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2005-01-12PDF 3.4 MB
Internal PhotosInternal Photos2006-01-26PDF 463 KB
Internal PhotosInternal Photos2005-01-12PDF 587.2 KB
External PhotosExternal Photos2006-01-26PDF 109.3 KB
External PhotosExternal Photos2005-01-12PDF 108 KB
LabelID Label/Location Info2006-01-26PDF 69.3 KB
Label LocationID Label/Location Info2006-01-26PDF 214.1 KB
Label SampleID Label/Location Info2005-01-12PDF 69.3 KB
Test Setup PhotosTest Setup Photos2006-01-26PDF 204.7 KB
Test Setup PhotosTest Setup Photos2005-01-12PDF 292.3 KB
Test ReportTest Report2006-01-26PDF 522.9 KB
Test ReportTest Report2005-01-12PDF 493.6 KB
Attestation LetterAttestation Statements2005-01-12PDF 153.3 KB
Attestation LetterCover Letter(s)2005-01-12PDF 154.1 KB
AgencyCover Letter(s)2006-01-26PDF 152.4 KB
Cover LetterCover Letter(s)2006-01-26PDF 75.7 KB
Channel RestrictionsCover Letter(s)2005-01-12PDF 172.9 KB
ConfidentialityCover Letter(s)2005-01-12PDF 163.2 KB
Cover LetterCover Letter(s)2005-01-12PDF 75.4 KB
Marketing LetterCover Letter(s)2005-01-12PDF 7.9 KB
Modular Approval LetterCover Letter(s)2005-01-12PDF 45.1 KB
Antenna Data SheetRF Exposure Info2006-01-26PDF 237.2 KB
Antenna InfoRF Exposure Info2006-01-26PDF 31.5 KB
RF Exposure MPERF Exposure Info2006-01-26PDF 106.9 KB
RF Exposure Info AntennaRF Exposure Info2005-01-12PDF 76.7 KB
RF Exposure Info MPERF Exposure Info2005-01-12PDF 108.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 49.6 KB
Schematics 1 Metadata onlySchematicsPDF 3.4 MB
Schematics 2 Metadata onlySchematicsPDF 1.8 MB
Description Metadata onlyOperational DescriptionPDF 310.1 KB
Bill Of Materials Metadata onlyParts List/Tune Up InfoPDF 36.5 KB

Application Information

Application ID5wvoD2eI1MxIqbYBnCougQ==
Final Action Date2006-01-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0010978799
ModelWIPORT
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiPort
Responsible PartyFathi Hakam, VP of Engineering, fhakam@lantronix.com , 949-453-3990
Technical ContactRick Candelas, Aegis labs, rick@aegislabsinc.com , 949-459-7886
Test FirmSteve Kuiper, AEGIS Labs, Inc., steve@aegislabsinc.com , 949-454-8295
TCB Emailhotline@americantcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
5wvoD2eI1MxIqbYBnCougQ==2006-01-26Class II permissive change or modification of presently authorized equipment
n6V7ObU/zBGMp2H8dJMtBQ==2005-01-12Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.039000015C

Grants

TCB Grant - Application n6V7ObU/zBGMp2H8dJMtBQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/12/2005

Application Dated: 01/12/2005
lantronix
7535 Irvine Center Drive
Suite 100
Irvine, CA 92618
 
Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R68WIPORT
Name of Grantee:  lantronix
Equipment Class: Digital Transmission System
Notes: WiPort
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.039  

Limited Modular Approval Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application n6V7ObU/zBGMp2H8dJMtBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

lantronix
7535 Irvine Center Drive Suite 100
Irvine, CA 92618
United States
  Date of Grant: 01/12/2005

Application Dated: 01/12/2005
 
Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R68WIPORT
Name of Grantee:  lantronix
Equipment Class: Digital Transmission System
Notes: WiPort
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.039  

Limited Modular Approval Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application 5wvoD2eI1MxIqbYBnCougQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/26/2006

Application Dated: 01/25/2006
lantronix
7535 Irvine Center Drive
Suite 100
Irvine, CA 92618
 
Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R68WIPORT
Name of Grantee:  lantronix
Equipment Class: Digital Transmission System
Notes: WiPort
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.039  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application 5wvoD2eI1MxIqbYBnCougQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

lantronix
7535 Irvine Center Drive Suite 100
Irvine, CA 92618
United States
  Date of Grant: 01/26/2006

Application Dated: 01/25/2006
 
Attention: Fathi Hakam , VP of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R68WIPORT
Name of Grantee:  lantronix
Equipment Class: Digital Transmission System
Notes: WiPort
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.039  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



Mail To: