FCC ID R68XPICO200
xPico 200 Series Wi-Fi IoT Gateway Module
by Lantronix, Inc.
Grantee Code: R68 Product Code: XPICO200
Latest application date: 2024-09-11
FCC ID Device Details
| FCC ID | R68XPICO200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R68 |
| Product Code | XPICO200 |
| Applicant Business | Lantronix, Inc. 🇺🇸 |
| Related Domains |  lantronix.com |
| Equipment Class | xPico 200 Series Wi-Fi IoT Gateway Module |
| Test Firm | TUV Rheinland LGA Products GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-11 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-11 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-13 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-19 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-28 |
| 2402-2480 MHz | Original Equipment | 2017-10-27 |
| 2402-2480 MHz | Original Equipment | 2017-10-27 |
| 5180-5240 MHz | Original Equipment | 2017-10-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2025-03-10 | PDF 4.5 MB |
| xPico 270 User Manual | Users Manual | 2023-11-13 | PDF 2.5 MB |
| User Manual | Users Manual | 2021-02-19 | PDF 2.6 MB |
| Users Manual rev | Users Manual | 2019-12-25 | PDF 2.4 MB |
| Users manual rev | Users Manual | 2019-12-25 | PDF 2.4 MB |
| User Manual | Users Manual | 2018-04-26 | PDF 1.6 MB |
| Internal Photos | Internal Photos | 2025-03-10 | PDF 245.9 KB |
| xPico 270 Inpho_20231101 | Internal Photos | 2023-11-13 | PDF 1.1 MB |
| Internal photos | Internal Photos | 2019-12-25 | PDF 1 MB |
| Internal photos | Internal Photos | 2018-04-26 | PDF 958.7 KB |
| External Photos | External Photos | 2025-03-10 | PDF 436.8 KB |
| xPico 270 Expho | External Photos | 2023-11-13 | PDF 1.2 MB |
| External photos | External Photos | 2019-12-25 | PDF 1.7 MB |
| External Photos | External Photos | 2018-04-26 | PDF 1.7 MB |
| External photos | External Photos | 2018-04-26 | PDF 1.7 MB |
| ID Label and Location | ID Label/Location Info | 2024-09-11 | PDF 299.3 KB |
| Label Location Info | ID Label/Location Info | 2024-09-11 | PDF 52.1 KB |
| Label info | ID Label/Location Info | 2021-02-19 | PDF 388.9 KB |
| Label Location | ID Label/Location Info | 2019-06-28 | PDF 55.6 KB |
| Label Sample | ID Label/Location Info | 2019-06-28 | PDF 596.9 KB |
| Label and Label location | ID Label/Location Info | 2017-10-27 | PDF 145.3 KB |
| Label and location | ID Label/Location Info | 2017-10-27 | PDF 145.3 KB |
| Block Diagram Metadata only | Block Diagram | 2017-10-27 | PDF 114.1 KB |
| Schematics Metadata only | Schematics | 2017-10-27 | PDF 79.3 KB |
| Operational Description Metadata only | Operational Description | 2017-10-27 | PDF 110.6 KB |
| Test Setup Photos | Test Setup Photos | 2025-03-10 | PDF 491.3 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2025-03-10 | PDF 492.1 KB |
| xPico 270 Tsup | Test Setup Photos | 2023-11-13 | PDF 1.1 MB |
| Test Setup Photos Module | Test Setup Photos | 2021-02-19 | PDF 729 KB |
| Test setup photos | Test Setup Photos | 2019-12-25 | PDF 746 KB |
| Test setup photos (for DFS) | Test Setup Photos | 2019-12-25 | PDF 71.5 KB |
| DFS Test Set-up Photos | Test Setup Photos | 2018-04-26 | PDF 109.9 KB |
| RF Test Set-up Photos | Test Setup Photos | 2018-04-26 | PDF 1.1 MB |
| Test Report | Test Report | 2024-09-11 | PDF 1.7 MB |
| Test Report | Test Report | 2024-09-11 | PDF 2.6 MB |
| xPico 270 Antenna spec for BT | Test Report | 2023-11-13 | PDF 890.9 KB |
| xPico 270 Antenna spec for WLAN | Test Report | 2023-11-13 | PDF 1.3 MB |
| xPico 270 TestRpt_15.247-BLE_20231102 | Test Report | 2023-11-13 | PDF 580.4 KB |
| xPico 270 TestRpt_15.247-BT_20231102 | Test Report | 2023-11-13 | PDF 903.9 KB |
| xPico 270 TestRpt_15.247_20231102 | Test Report | 2023-11-13 | PDF 1 MB |
| xPico 270 TestRpt_15.407_20231102 | Test Report | 2023-11-13 | PDF 4 MB |
| Test Report (DFS) | Test Report | 2019-06-28 | PDF 783 KB |
| Test Report (DTS-BT LE) | Test Report | 2019-06-28 | PDF 688.8 KB |
| Test Report (DTS-WLAN) | Test Report | 2019-06-28 | PDF 706.9 KB |
| Test report (DTS-BT EDR) | Test Report | 2019-06-28 | PDF 696.5 KB |
| Test report (NII) rev | Test Report | 2019-06-28 | PDF 988.1 KB |
| DFS Test Report | Test Report | 2017-10-27 | PDF 614.8 KB |
| RF Test Report | Test Report | 2017-10-27 | PDF 3.2 MB |
| RF Test Report | Test Report | 2017-10-27 | PDF 1.1 MB |
| RF Test Report-BLE | Test Report | 2017-10-27 | PDF 748.5 KB |
| RF Test Report-WIFI | Test Report | 2017-10-27 | PDF 1.3 MB |
| Attestation Statement_Not Covered Entity Applicant_c signed | Attestation Statements | 2024-09-11 | PDF 165.3 KB |
| Attestation Statement_Not Covered Equipment | Attestation Statements | 2024-09-11 | PDF 158.4 KB |
| Attestation Statement_US Agent Letter | Attestation Statements | 2024-09-11 | PDF 153 KB |
| xPico 270 Covered-List-Attestation | Attestation Statements | 2023-11-13 | PDF 280.5 KB |
| xPico 270 U.S.-Agent-Letter-for-Service-of-Process | Attestation Statements | 2023-11-13 | PDF 230.2 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2019-06-28 | PDF 153.9 KB |
| Attestation (DFS Client Declaration) | Attestation Statements | 2019-06-28 | PDF 607.3 KB |
| DOC Attestation Letter | Attestation Statements | 2017-10-27 | PDF 555.3 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2024-09-11 | PDF 174.3 KB |
| POA Letter | Cover Letter(s) | 2024-09-11 | PDF 186.6 KB |
| Request for C2PC Letter | Cover Letter(s) | 2024-09-11 | PDF 171.1 KB |
| xPico 270 FCC Confidentiality-Letter | Cover Letter(s) | 2023-11-13 | PDF 296 KB |
| xPico 270 FCC Declaration of Authorization | Cover Letter(s) | 2023-11-13 | PDF 259.5 KB |
| xPico 270 FCC Permissive Change Ltr_20231113 | Cover Letter(s) | 2023-11-13 | PDF 194.5 KB |
| C2PC Cover Letter | Cover Letter(s) | 2021-02-19 | PDF 272.2 KB |
| POA Letter | Cover Letter(s) | 2021-02-19 | PDF 268.5 KB |
| Agent Authorization | Cover Letter(s) | 2019-06-28 | PDF 230.1 KB |
| Agent authorization | Cover Letter(s) | 2019-06-28 | PDF 230.1 KB |
| Confidentiality request (Long term) rev | Cover Letter(s) | 2019-06-28 | PDF 50.4 KB |
| Confidentiality request (Short term) rev | Cover Letter(s) | 2019-06-28 | PDF 240.8 KB |
| Description of Change rev | Cover Letter(s) | 2019-06-28 | PDF 490.8 KB |
| Authorization letter | Cover Letter(s) | 2017-10-27 | PDF 1.3 MB |
| DFS Declaration Letter | Cover Letter(s) | 2017-10-27 | PDF 366 KB |
| DTS Ch12&13 Declaration letter | Cover Letter(s) | 2017-10-27 | PDF 436.4 KB |
| LTC Letter | Cover Letter(s) | 2017-10-27 | PDF 211.8 KB |
| Lantronix vs Lantronix Inc letter | Cover Letter(s) | 2017-10-27 | PDF 187.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2017-10-27 | PDF 18.4 KB |
| POA | Cover Letter(s) | 2017-10-27 | PDF 1.6 MB |
| STC Letter | Cover Letter(s) | 2017-10-27 | PDF 261.6 KB |
| SAR Report | RF Exposure Info | 2024-09-11 | PDF 5.4 MB |
| xPico 270 RFExp | RF Exposure Info | 2023-11-13 | PDF 226.1 KB |
| SAR Report | RF Exposure Info | 2021-02-19 | PDF 2.3 MB |
| RF Exposure Info (MPE) | RF Exposure Info | 2019-06-28 | PDF 264.7 KB |
| MPE Report | RF Exposure Info | 2017-10-27 | PDF 258 KB |
| Block diagram Metadata only | Block Diagram | PDF 83.9 KB | |
| Schematics Metadata only | Schematics | PDF 144.3 KB | |
| Confidential_xPico 270 OPDEs_20231025 Metadata only | Operational Description | PDF 318.4 KB | |
| Operational Description_rev Metadata only | Operational Description | PDF 415.1 KB | |
| Operational Desription Metadata only | Operational Description | PDF 110.6 KB | |
| SW Description Letter Metadata only | Operational Description | PDF 2.1 MB | |
| Software Operational Description rev Metadata only | Operational Description | PDF 2.1 MB |
Application Information
| Application ID | h0HXQ5TZqce3Rn+WsrIPXg== |
|---|---|
| Final Action Date | 2024-09-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010978799 |
| Model | XPICO200 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | xPico 200 Series Wi-Fi IoT Gateway Module |
| Responsible Party | Eric Bass, VP of Engineering, ebass@lantronix.com , 9494537124 |
| Test Firm | Patrick Reusch, TUV Rheinland LGA Products GmbH, Patrick.Reusch@de.tuv.com  , +49 911 655 5785 |
| TCB Email | tcb-hotline@tuv.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/10/2025 |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II permissive change with disable Bluetooth function via software upgrade and request for adding host system Electronic Torque Wrench with approval of portable usage condition. Host model: OPEX 30 Nm, OPEX 60 Nm, OPEX 100 Nm, OPEX 200 Nm, OPEX 300 Nm, OPEX 400 Nm, OPEX 600 Nm & OPEX 800 Nm. The highest reported Body SAR value is 0.97 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| h0HXQ5TZqce3Rn+WsrIPXg== | 2024-09-11 | Class II permissive change or modification of presently authorized equipment |
| X9J7HzkERIMLIO680LmFPQ== | 2024-09-11 | Class II permissive change or modification of presently authorized equipment |
| av4l8FJXCEjZBUnF34egCw== | 2023-11-13 | Class II permissive change or modification of presently authorized equipment |
| QkPdjV0eRLWT+uL2m3IPPA== | 2023-11-13 | Class II permissive change or modification of presently authorized equipment |
| 8RV7dHh5cKv6D4j0YF8qbg== | 2023-11-13 | Class II permissive change or modification of presently authorized equipment |
| gBHIsOtY3CoNpIQ0+GDdUw== | 2021-02-19 | Class II permissive change or modification of presently authorized equipment |
| X5PlyLRAxThuosF83kjJ+g== | 2021-02-19 | Class II permissive change or modification of presently authorized equipment |
| BGSzyJcH4DuH1FVxtzhXKg== | 2021-02-19 | Class II permissive change or modification of presently authorized equipment |
| NKdStiWV7JmLvR3XHdbpdA== | 2019-06-28 | Class II permissive change or modification of presently authorized equipment |
| N6QMGkKzTDTKV5mMiw/t4Q== | 2019-06-28 | Class II permissive change or modification of presently authorized equipment |
| KVHtolOxzqzlHg7HC/N66Q== | 2019-06-28 | Class II permissive change or modification of presently authorized equipment |
| tYqfWKY6hboqRnBrZHMRfQ== | 2017-10-27 | Original Equipment |
| YuWkmkV5jz1WtXY4mY9Fdg== | 2017-10-27 | Original Equipment |
| K6ANT8YQunQjaNgrNrpXHg== | 2017-10-27 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.004 | 15C | CC |
| 2402-2480 MHz | 0.0010000 | 15C | CC |
| 2412-2462 MHz | 0.2960000 | 15C | CC |
| 2412-2462 MHz | 0.296 | 15C | CC |
| 5180-5240 MHz | 0.069 | 15E | 38, CC |
| 5180-5240 MHz | 0.069 | 15E | CC |
| 5260-5320 MHz | 0.069 | 15E | 38, CC, ND |
| 5260-5320 MHz | 0.069 | 15E | CC, ND |
| 5260-5320 MHz | 0.069 | 15E | CC |
| 5500-5700 MHz | 0.064 | 15E | 38, CC, ND |
| 5500-5700 MHz | 0.064 | 15E | CC, ND |
| 5500-5700 MHz | 0.064 | 15E | CC |
| 5745-5825 MHz | 0.067 | 15E | 38, CC |
| 5745-5825 MHz | 0.067 | 15E | CC |
Grants
TCB Grant - Application YuWkmkV5jz1WtXY4mY9Fdg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/27/2017 Application Dated: 10/27/2017 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YuWkmkV5jz1WtXY4mY9Fdg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 10/27/2017 Application Dated: 10/27/2017 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 09/11/2024 Application Dated: 09/11/2024 |
| Lantronix, Inc. |
| 48 Discovery, |
| Suite 250 |
| Irvine, CA 92618 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II permissive change with disable Bluetooth function via software upgrade and request for adding host system Electronic Torque Wrench with approval of portable usage condition. Host model: OPEX 30 Nm, OPEX 60 Nm, OPEX 100 Nm, OPEX 200 Nm, OPEX 300 Nm, OPEX 400 Nm, OPEX 600 Nm & OPEX 800 Nm. The highest reported Body SAR value is 0.56 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application X9J7HzkERIMLIO680LmFPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lantronix, Inc. 48 Discovery, Suite 250 Irvine, CA 92618 United States |
Date of Grant: 09/11/2024 Application Dated: 09/11/2024 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II permissive change with disable Bluetooth function via software upgrade and request for adding host system Electronic Torque Wrench with approval of portable usage condition. Host model: OPEX 30 Nm, OPEX 60 Nm, OPEX 100 Nm, OPEX 200 Nm, OPEX 300 Nm, OPEX 400 Nm, OPEX 600 Nm & OPEX 800 Nm. The highest reported Body SAR value is 0.56 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPICO 250 installed in SP500X Wireless Hand Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.069 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.064 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Output power listed is conducted. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into Handheld Group’s Wireless Hand Reader SP500X. The highest reported SAR is 0.18 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application X5PlyLRAxThuosF83kjJ+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPICO 250 installed in SP500X Wireless Hand Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.069 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.064 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Output power listed is conducted. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into Handheld Group’s Wireless Hand Reader SP500X. The highest reported SAR is 0.18 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/27/2017 Application Dated: 10/27/2017 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tYqfWKY6hboqRnBrZHMRfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 10/27/2017 Application Dated: 10/27/2017 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/13/2023 Application Dated: 11/13/2023 |
| Lantronix, Inc. |
| 48 Discovery, |
| Suite 250 |
| Irvine, CA 92618 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| C2PC for adding the additional antennas as documented in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device contains 5 GHz WLAN and BT transmitters. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QkPdjV0eRLWT+uL2m3IPPA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lantronix, Inc. 48 Discovery, Suite 250 Irvine, CA 92618 United States |
Date of Grant: 11/13/2023 Application Dated: 11/13/2023 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| C2PC for adding the additional antennas as documented in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device contains 5 GHz WLAN and BT transmitters. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/28/2019 Application Dated: 06/28/2019 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Class II Permissive Change for adding one new model (xPico 270 by Lantronix) which has 802.11ac enabled through software upgrade as described in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NKdStiWV7JmLvR3XHdbpdA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 06/28/2019 Application Dated: 06/28/2019 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Class II Permissive Change for adding one new model (xPico 270 by Lantronix) which has 802.11ac enabled through software upgrade as described in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/28/2019 Application Dated: 06/28/2019 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Class II Permissive Change for adding one new model (xPico 270 by Lantronix) which has 802.11ac enabled through software upgrade as described in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application N6QMGkKzTDTKV5mMiw/t4Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 06/28/2019 Application Dated: 06/28/2019 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Class II Permissive Change for adding one new model (xPico 270 by Lantronix) which has 802.11ac enabled through software upgrade as described in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/28/2019 Application Dated: 06/28/2019 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Class II Permissive Change for adding one new model (xPico 270 by Lantronix) which has 802.11ac enabled through software upgrade as described in this filing. Single module approval. Power Output listed is conducted. Device contains 20/40MHz bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application KVHtolOxzqzlHg7HC/N66Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 06/28/2019 Application Dated: 06/28/2019 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Class II Permissive Change for adding one new model (xPico 270 by Lantronix) which has 802.11ac enabled through software upgrade as described in this filing. Single module approval. Power Output listed is conducted. Device contains 20/40MHz bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/27/2017 Application Dated: 10/27/2017 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Single module approval. Power Output listed is conducted. Device contains 20/40MHz bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application K6ANT8YQunQjaNgrNrpXHg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 10/27/2017 Application Dated: 10/27/2017 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Single module approval. Power Output listed is conducted. Device contains 20/40MHz bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 09/11/2024 Application Dated: 09/11/2024 |
| Lantronix, Inc. |
| 48 Discovery, |
| Suite 250 |
| Irvine, CA 92618 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II permissive change with disable Bluetooth function via software upgrade and request for adding host system Electronic Torque Wrench with approval of portable usage condition. Host model: OPEX 30 Nm, OPEX 60 Nm, OPEX 100 Nm, OPEX 200 Nm, OPEX 300 Nm, OPEX 400 Nm, OPEX 600 Nm & OPEX 800 Nm. The highest reported Body SAR value is 0.97 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application h0HXQ5TZqce3Rn+WsrIPXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lantronix, Inc. 48 Discovery, Suite 250 Irvine, CA 92618 United States |
Date of Grant: 09/11/2024 Application Dated: 09/11/2024 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.067 |
| Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II permissive change with disable Bluetooth function via software upgrade and request for adding host system Electronic Torque Wrench with approval of portable usage condition. Host model: OPEX 30 Nm, OPEX 60 Nm, OPEX 100 Nm, OPEX 200 Nm, OPEX 300 Nm, OPEX 400 Nm, OPEX 600 Nm & OPEX 800 Nm. The highest reported Body SAR value is 0.97 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPICO 250 installed in SP500X Wireless Hand Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Class II Permissive Change: Authorizes portable use when integrated into Handheld Group’s Wireless Hand Reader SP500X. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gBHIsOtY3CoNpIQ0+GDdUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPICO 250 installed in SP500X Wireless Hand Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Class II Permissive Change: Authorizes portable use when integrated into Handheld Group’s Wireless Hand Reader SP500X. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | xPICO 250 installed in SP500X Wireless Hand Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Output power listed is conducted. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into Handheld Group’s Wireless Hand Reader SP500X. The highest reported SAR is <0.10 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application BGSzyJcH4DuH1FVxtzhXKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | xPICO 250 installed in SP500X Wireless Hand Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.296 |
| Output power listed is conducted. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into Handheld Group’s Wireless Hand Reader SP500X. The highest reported SAR is <0.10 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/13/2023 Application Dated: 11/13/2023 |
| Lantronix, Inc. |
| 48 Discovery, |
| Suite 250 |
| Irvine, CA 92618 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.067 |
| C2PC for adding the additional antennas as documented in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously to be evaluated using the FCC multi-transmitter procedures. This device supports 20, 40 and 80 MHz bandwidth modes, and contains 2.4 GHz WLAN, BLE and BT transmitters. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDBPublication 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application av4l8FJXCEjZBUnF34egCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lantronix, Inc. 48 Discovery, Suite 250 Irvine, CA 92618 United States |
Date of Grant: 11/13/2023 Application Dated: 11/13/2023 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.069 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.069 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.064 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.067 |
| C2PC for adding the additional antennas as documented in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously to be evaluated using the FCC multi-transmitter procedures. This device supports 20, 40 and 80 MHz bandwidth modes, and contains 2.4 GHz WLAN, BLE and BT transmitters. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDBPublication 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/13/2023 Application Dated: 11/13/2023 |
| Lantronix, Inc. |
| 48 Discovery, |
| Suite 250 |
| Irvine, CA 92618 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| C2PC for adding the additional antennas as documented in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device contains BLE, 2.4GHz and 5GHz WLAN transmitters. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8RV7dHh5cKv6D4j0YF8qbg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lantronix, Inc. 48 Discovery, Suite 250 Irvine, CA 92618 United States |
Date of Grant: 11/13/2023 Application Dated: 11/13/2023 |
| Attention: Eric Bass , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICO200 |
| Name of Grantee: | Lantronix, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | xPico 200 Series Wi-Fi IoT Gateway Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| C2PC for adding the additional antennas as documented in this filing. Single module approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device contains BLE, 2.4GHz and 5GHz WLAN transmitters. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |