FCC ID R68XPICOW
802.11b/g/n Wireless Module, xPico Wi-Fi SMT Module
by lantronix
Grantee Code: R68 Product Code: XPICOW
Latest application date: 2014-11-25
FCC ID Device Details
| FCC ID | R68XPICOW |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R68 |
| Product Code | XPICOW |
| Applicant Business | lantronix 🇺🇸 |
| Related Domains |  lantronix.com |
| Equipment Class | 802.11b/g/n Wireless Module, xPico Wi-Fi SMT Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-11-25 |
| 2412-2462 MHz | Original Equipment | 2013-07-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual rev.pdf | Users Manual | 2014-11-25 | PDF 1.9 MB |
| User Manual.pdf | Users Manual | 2013-08-14 | PDF 1.5 MB |
| Internal Photos.pdf | Internal Photos | 2014-11-25 | PDF 616.8 KB |
| Internal Photos.pdf | Internal Photos | 2013-08-14 | PDF 155.8 KB |
| External Photos.pdf | External Photos | 2014-11-25 | PDF 2.5 MB |
| External Photos.pdf | External Photos | 2013-08-14 | PDF 856.8 KB |
| Label and Location.pdf | ID Label/Location Info | 2013-07-22 | PDF 40.3 KB |
| Operational Description.pdf | Operational Description | 2013-07-22 | PDF 57.3 KB |
| Test Setup Photo.pdf | Test Setup Photos | 2014-11-25 | PDF 2.2 MB |
| Test Setup Photo.pdf | Test Setup Photos | 2013-08-14 | PDF 546.7 KB |
| Test Report.pdf | Test Report | 2014-11-25 | PDF 739.1 KB |
| Test Report.pdf | Test Report | 2013-07-22 | PDF 507.4 KB |
| Attestation (Channel and Mode Declaration).pdf | Attestation Statements | 2013-07-22 | PDF 202.2 KB |
| Cover Letter - Agent Authorization.pdf | Cover Letter(s) | 2014-11-25 | PDF 224.9 KB |
| Cover Letter - Confidentiality Request - Long Term rev.pdf | Cover Letter(s) | 2014-11-25 | PDF 408.1 KB |
| Cover Letter - Description of Permissive Change-rev.pdf | Cover Letter(s) | 2014-11-25 | PDF 1.1 MB |
| Confidentiality Request (Shortterm).pdf | Cover Letter(s) | 2013-07-22 | PDF 213.5 KB |
| Confidentiality Request.pdf | Cover Letter(s) | 2013-07-22 | PDF 243.3 KB |
| Cover Letter (Agent Authorization).pdf | Cover Letter(s) | 2013-07-22 | PDF 269.3 KB |
| Cover Letter (Modular Approval Request).pdf | Cover Letter(s) | 2013-07-22 | PDF 18.2 KB |
| RF Exposure Information (MPE).pdf | RF Exposure Info | 2014-11-25 | PDF 354.7 KB |
| RF Exposure Info (MPE).pdf | RF Exposure Info | 2013-07-22 | PDF 73.4 KB |
| Block Diagram.pdf Metadata only | Block Diagram | PDF 181 KB | |
| Schematic.pdf Metadata only | Schematics | PDF 300.6 KB |
Application Information
| Application ID | aPc/BoIwqYuFOf3HLSiWUQ== |
|---|---|
| Final Action Date | 2014-11-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0010978799 |
| Model | XPICOW |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g/n Wireless Module, xPico Wi-Fi SMT Module |
| Responsible Party | Fathi Hakam, VP of Engineering, fhakam@lantronix.com , 949-453-3990 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-3-2600884 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aPc/BoIwqYuFOf3HLSiWUQ== | 2014-11-25 | Class II permissive change or modification of presently authorized equipment |
| SjtLua3v90TinImoKO87Ng== | 2013-07-22 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2320000 | 15C |
Grants
TCB Grant - Application SjtLua3v90TinImoKO87Ng==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 07/22/2013 Application Dated: 07/22/2013 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Daryl Miller , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICOW |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.232 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application SjtLua3v90TinImoKO87Ng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 07/22/2013 Application Dated: 07/22/2013 |
| Attention: Daryl Miller , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICOW |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.232 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 11/25/2014 Application Dated: 11/25/2014 |
| lantronix |
| 7535 Irvine Center Drive |
| Suite 100 |
| Irvine, CA 92618 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICOW |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n Wireless Module, xPico Wi-Fi SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.232 |
| Class II Permissive Change as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application aPc/BoIwqYuFOf3HLSiWUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
lantronix 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 United States |
Date of Grant: 11/25/2014 Application Dated: 11/25/2014 |
| Attention: Fathi Hakam , VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R68XPICOW |
| Name of Grantee: | lantronix |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n Wireless Module, xPico Wi-Fi SMT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.232 |
| Class II Permissive Change as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: |