FCC ID R73HPB-24G-1
2.4 GHz FHSS TRANSCEIVER
by The Sapling Company, Inc
Grantee Code: R73 Product Code: HPB24G1
Latest application date: 2014-01-22
FCC ID Device Details
| FCC ID | R73HPB-24G-1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R73 |
| Product Code | HPB24G1 |
| Applicant Business | The Sapling Company, Inc 🇺🇸 |
| Related Domains |  sapling-inc.com |
| Equipment Class | 2.4 GHz FHSS TRANSCEIVER |
| Test Firm | Retlif Testing Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2433-2449 MHz | Class II permissive change or modification of presently authorized equipment | 2014-01-22 |
| 2433-2449 MHz | Original Equipment | 2013-08-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-08-26 | PDF 994.4 KB |
| User Manual OEM | Users Manual | 2013-08-26 | PDF 1 MB |
| Internal Photos | Internal Photos | 2013-08-26 | PDF 152.1 KB |
| External Photos | External Photos | 2013-08-26 | PDF 704.5 KB |
| Label Location | ID Label/Location Info | 2013-08-26 | PDF 60 KB |
| Label Sample | ID Label/Location Info | 2013-08-26 | PDF 69 KB |
| Block Diagram | Block Diagram | 2013-08-26 | PDF 13.6 KB |
| Operational Description | Operational Description | 2013-08-26 | PDF 13.1 KB |
| Test Setup Photos | Test Setup Photos | 2013-08-26 | PDF 1.2 MB |
| Test Report | Test Report | 2013-08-26 | PDF 431.5 KB |
| Class II Letter | Cover Letter(s) | 2014-01-22 | PDF 50.6 KB |
| Cover Letter | Cover Letter(s) | 2014-01-22 | PDF 90.1 KB |
| Agreement Letter | Cover Letter(s) | 2013-08-26 | PDF 78.3 KB |
| Confidential Letter | Cover Letter(s) | 2013-08-26 | PDF 80.2 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2013-08-26 | PDF 28.1 KB |
| Parts List | Parts List/Tune Up Info | 2013-08-26 | PDF 45.8 KB |
Application Information
| Application ID | NIHTu0U7RSwQqwZRaQgL4g== |
|---|---|
| Final Action Date | 2014-01-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011008133 |
| Model | HPB-24G-1 |
| Frequency Range | 2433-2449 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2.4 GHz FHSS TRANSCEIVER |
| Responsible Party | Lars Jorgensen, Engineering, larsj@sapling-inc.com , 215-322-6063 |
| Test Firm | Michael Bozza, Retlif Testing Laboratories, mbozza@retlif.com  , 215-256-4133 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Power output is conducted. Approval is limited to installation into Grantee’s hosts only part # SMA-1SR-G000-1 and SMA-3SO-G008-1. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Change modifies the Grant Note to state: “Approval is limited to installation into Grantees hosts only SMA Series Master Clocks and NTP Series Master Clocks.” There are no other changes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| NIHTu0U7RSwQqwZRaQgL4g== | 2014-01-22 | Class II permissive change or modification of presently authorized equipment |
| 7ZWE0rP8Y3znkRZnb5D3pA== | 2013-08-26 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2433-2449 MHz | 0.8910000 | 15C |
Grants
TCB Grant - Application NIHTu0U7RSwQqwZRaQgL4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 01/22/2014 Application Dated: 01/22/2014 |
| The Sapling Company, Inc |
| 1633 Republic Rd |
| Huntingdon Valley, PA 19006 |
| Attention: Lars Jorgensen , Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R73HPB-24G-1 |
| Name of Grantee: | The Sapling Company, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4 GHz FHSS TRANSCEIVER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2433.0 - 2449.0 | 0.891 |
| Limited Single Modular Approval. Power output is conducted. Approval is limited to installation into Grantee’s hosts only part # SMA-1SR-G000-1 and SMA-3SO-G008-1. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Change modifies the Grant Note to state: “Approval is limited to installation into Grantees hosts only SMA Series Master Clocks and NTP Series Master Clocks.” There are no other changes. |
EAS Grant - Application NIHTu0U7RSwQqwZRaQgL4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
The Sapling Company, Inc 1633 Republic Rd Huntingdon Valley, PA 19006 United States |
Date of Grant: 01/22/2014 Application Dated: 01/22/2014 |
| Attention: Lars Jorgensen , Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R73HPB-24G-1 |
| Name of Grantee: | The Sapling Company, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4 GHz FHSS TRANSCEIVER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2433.0 - 2449.0 | 0.891 |
| Limited Single Modular Approval. Power output is conducted. Approval is limited to installation into Grantee’s hosts only part # SMA-1SR-G000-1 and SMA-3SO-G008-1. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Change modifies the Grant Note to state: “Approval is limited to installation into Grantees hosts only SMA Series Master Clocks and NTP Series Master Clocks.” There are no other changes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 08/26/2013 Application Dated: 08/26/2013 |
| The Sapling Company, Inc |
| 1633 Republic Rd |
| Huntingdon Valley, PA 19006 |
| Attention: Lars Jorgensen , Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R73HPB-24G-1 |
| Name of Grantee: | The Sapling Company, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz FHSS TRANSCEIVER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2433.0 - 2449.0 | 0.891 |
| Limited Single Modular Approval. Power output is conducted. Approval is limited to installation into Grantee’s hosts only part # SMA-1SR-G000-1 and SMA-3SO-G008-1. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application 7ZWE0rP8Y3znkRZnb5D3pA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
The Sapling Company, Inc 1633 Republic Rd Huntingdon Valley, PA 19006 United States |
Date of Grant: 08/26/2013 Application Dated: 08/26/2013 |
| Attention: Lars Jorgensen , Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R73HPB-24G-1 |
| Name of Grantee: | The Sapling Company, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz FHSS TRANSCEIVER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2433.0 - 2449.0 | 0.891 |
| Limited Single Modular Approval. Power output is conducted. Approval is limited to installation into Grantee’s hosts only part # SMA-1SR-G000-1 and SMA-3SO-G008-1. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |