FCC ID R7P26-1129-01
InfiNet Concentrator
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: 26112901
Latest application date: 2006-05-12
FCC ID Device Details
| FCC ID | R7P26-1129-01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | 26112901 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | InfiNet Concentrator |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.1-927.9 MHz | Original Equipment | 2006-05-12 |
| 917.58 MHz | Original Equipment | 2006-05-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| users manual | Users Manual | 2006-05-12 | PDF 703.2 KB |
| internal photos | Internal Photos | 2006-05-12 | PDF 535.5 KB |
| external photos | External Photos | 2006-05-12 | PDF 401.1 KB |
| label sampel and location | ID Label/Location Info | 2006-05-12 | PDF 193.6 KB |
| label sample and location | ID Label/Location Info | 2006-05-12 | PDF 193.6 KB |
| test setup photos | Test Setup Photos | 2006-05-12 | PDF 801.3 KB |
| test report | Test Report | 2006-05-12 | PDF 189.1 KB |
| request for confidentiality | Cover Letter(s) | 2006-05-12 | PDF 144.5 KB |
| rf exposure info | RF Exposure Info | 2006-05-12 | PDF 29.9 KB |
| block diagram Metadata only | Block Diagram | PDF 264.2 KB | |
| schematics Metadata only | Schematics | PDF 512.9 KB | |
| operational description 1 Metadata only | Operational Description | PDF 1.3 MB | |
| operational description 2 Metadata only | Operational Description | PDF 3.2 MB | |
| operational description 3 Metadata only | Operational Description | PDF 2.4 MB | |
| rf timing analysis Metadata only | Operational Description | PDF 25.5 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 186.5 KB |
Application Information
| Application ID | mn4pvlxXlqBNP4Fp1XQmiw== |
|---|---|
| Final Action Date | 2006-05-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011025368 |
| Model | 26-1129-01 |
| Frequency Range | 902.1-927.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | InfiNet Concentrator |
| Responsible Party | James L Stortz, Director of Hardware Engineering, jim.stortz@landisgyr.com , 678-258-1500 |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770-831-8048 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mn4pvlxXlqBNP4Fp1XQmiw== | 2006-05-12 | Original Equipment |
| GmCkYiK12RicHVNp1camyA== | 2006-05-12 | Original Equipment |
Grants
TCB Grant - Application mn4pvlxXlqBNP4Fp1XQmiw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/12/2006 Application Dated: 05/12/2006 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7P26-1129-01 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | InfiNet Concentrator |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.121 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
EAS Grant - Application mn4pvlxXlqBNP4Fp1XQmiw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 05/12/2006 Application Dated: 05/12/2006 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7P26-1129-01 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | InfiNet Concentrator |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.121 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/12/2006 Application Dated: 05/12/2006 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7P26-1129-01 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | InfiNet Concentrator |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.58 - 917.58 | 0.444 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application GmCkYiK12RicHVNp1camyA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 05/12/2006 Application Dated: 05/12/2006 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7P26-1129-01 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | InfiNet Concentrator |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.58 - 917.58 | 0.444 |
| Power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |