FCC ID R7PCMM1200
Utility Meter Transmitter
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: CMM1200
Latest application date: 2004-08-31
FCC ID Device Details
| FCC ID | R7PCMM1200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | CMM1200 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com  wbklaw.com |
| Equipment Class | Utility Meter Transmitter |
| Test Firm | CKC Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 917.6 MHz | Change in identification of presently authorized equipment. Original FCC ID: F9CCMM1200 Grant Date: 07/09/2001 | 2004-08-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photo | External Photos | 2004-08-31 | PDF 64.6 KB |
| Label | ID Label/Location Info | 2004-08-31 | PDF 73.2 KB |
| Description of Transaction | Cover Letter(s) | 2004-08-31 | PDF 10.5 KB |
Application Information
| Application ID | 3n1wpMk6puueL5GCXiCO7g== |
|---|---|
| Final Action Date | 2004-08-31 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: F9CCMM1200 Grant Date: 07/09/2001 |
| Applicant FRN | 0011025368 |
| Model | CMM1200 |
| Frequency Range | 917.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Utility Meter Transmitter |
| Responsible Party | James L Stortz, Director of Hardware Engineering, jim.stortz@landisgyr.com , 678-258-1500 |
| Technical Contact | Ruben Salazar, Atos Origin IT Services Inc. dba Cellnet, ruben.salazarcardozo@atosorigin.com  , (678) 258-3165 |
| Non-Technical Contact | Jeffrey S Cohen, Wilkinson Barker Knauer, LLP, jcohen@wbklaw.com , (202) 783-4141 |
| Test Firm | Steve Behm, CKC Laboratories, Inc., qa@ckc.com  , 209-966-5240 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor not exceeding 0.001 %. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3n1wpMk6puueL5GCXiCO7g== | 2004-08-31 | Change in identification of presently authorized equipment. Original FCC ID: F9CCMM1200 Grant Date: 07/09/2001 |
Grants
TCB Grant - Application 3n1wpMk6puueL5GCXiCO7g==
This application does not exist.
EAS Grant - Application 3n1wpMk6puueL5GCXiCO7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 08/31/2004 Application Dated: 06/24/2004 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCMM1200 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Utility Meter Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 917.6 - 917.6 | 0.19 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time-averaging duty factor not exceeding 0.001 %. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |