FCC ID R7PCONCS4
Series-4 Conc.
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: CONCS4
Latest application date: 2010-06-30
FCC ID Device Details
| FCC ID | R7PCONCS4 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | CONCS4 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | Series-4 Conc. |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-927.8 MHz | Original Equipment | 2010-06-30 |
| 917.58 MHz | Original Equipment | 2010-06-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2010-06-30 | PDF 3.9 MB |
| Internal Photos | Internal Photos | 2010-06-30 | PDF 1.4 MB |
| External Photos | External Photos | 2010-06-30 | PDF 257.8 KB |
| Label Information | ID Label/Location Info | 2010-06-30 | PDF 86.5 KB |
| Test Setup Photos | Test Setup Photos | 2010-06-30 | PDF 1 MB |
| Test Report | Test Report | 2010-06-30 | PDF 160.4 KB |
| Test Report | Test Report | 2010-06-30 | PDF 711.2 KB |
| Agency Agreement | Cover Letter(s) | 2010-06-30 | PDF 53.6 KB |
| Agency Agreement Letter | Cover Letter(s) | 2010-06-30 | PDF 53.6 KB |
| Confidentiality Request | Cover Letter(s) | 2010-06-30 | PDF 17.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2010-06-30 | PDF 17.1 KB |
| RF Exposure | RF Exposure Info | 2010-06-30 | PDF 26.6 KB |
Application Information
| Application ID | s2GhIokCN6wj6WQ/qeouZg== |
|---|---|
| Final Action Date | 2010-06-30 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011025368 |
| Model | CONCS4 |
| Frequency Range | 902.3-927.8 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Series-4 Conc. |
| Responsible Party | Richard Timko, Quality Engineer, richard.timko@landisgyr.com , 678-258-1500 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770 831 8048 |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is Conducted. This device must be professionally installed and is limited to mobile and fixed applications only. The antenna(s) used for this transmitter must installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| s2GhIokCN6wj6WQ/qeouZg== | 2010-06-30 | Original Equipment |
| cI8dwYg5vgmeb3dvXcuHOw== | 2010-06-30 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application s2GhIokCN6wj6WQ/qeouZg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 06/30/2010 Application Dated: 06/30/2010 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series-4 Conc. |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.8 | 1.0 | |||
| 15C | 904.0 - 927.9 | 1.0 | |||
| 15C | 902.3 - 927.9 | 1.0 |
| Power listed is Conducted. This device must be professionally installed and is limited to mobile and fixed applications only. The antenna(s) used for this transmitter must installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application s2GhIokCN6wj6WQ/qeouZg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 06/30/2010 Application Dated: 06/30/2010 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series-4 Conc. |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.8 | 1.0 | |||
| 15C | 904.0 - 927.9 | 1.0 | |||
| 15C | 902.3 - 927.9 | 1.0 |
| Power listed is Conducted. This device must be professionally installed and is limited to mobile and fixed applications only. The antenna(s) used for this transmitter must installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 06/30/2010 Application Dated: 06/30/2010 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Series-4 Conc. |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.58 - 917.58 | 0.27 |
| Power listed is Conducted. This device must be professionally installed and is limited to mobile and fixed applications only. The antenna(s) used for this transmitter must installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application cI8dwYg5vgmeb3dvXcuHOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 06/30/2010 Application Dated: 06/30/2010 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Series-4 Conc. |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.58 - 917.58 | 0.27 |
| Power listed is Conducted. This device must be professionally installed and is limited to mobile and fixed applications only. The antenna(s) used for this transmitter must installed to provide a separation distance of at least 22 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |