FCC ID R7PCONCS4B5
Series-4 Concentrator, BLT5
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: CONCS4B5
Latest application date: 2013-07-11
FCC ID Device Details
| FCC ID | R7PCONCS4B5 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | CONCS4B5 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains | |
| Equipment Class | Series-4 Concentrator, BLT5 |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.9 MHz | Original Equipment | 2013-07-11 |
| 917.58 MHz | Original Equipment | 2013-07-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2013-07-11 | PDF 3.9 MB |
| Internal Photos | Internal Photos | 2013-07-11 | PDF 870 KB |
| External Photos | External Photos | 2013-07-11 | PDF 364.1 KB |
| Label Information | ID Label/Location Info | 2013-07-11 | PDF 182.1 KB |
| Test Setup Photos | Test Setup Photos | 2013-07-11 | PDF 197.6 KB |
| Test Report | Test Report | 2013-07-11 | PDF 335.8 KB |
| Test Report | Test Report | 2013-07-11 | PDF 723.4 KB |
| Agency Agreeemnt | Cover Letter(s) | 2013-07-11 | PDF 52.1 KB |
| Agency Agreement | Cover Letter(s) | 2013-07-11 | PDF 52.1 KB |
| Confidentiality Request | Cover Letter(s) | 2013-07-11 | PDF 52.1 KB |
| FCC Cover Letter | Cover Letter(s) | 2013-07-11 | PDF 12.6 KB |
| RF Exposure | RF Exposure Info | 2013-07-11 | PDF 30.4 KB |
Application Information
| Application ID | paCyyzku330hTwl9UYYxNA== |
|---|---|
| Final Action Date | 2013-07-11 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011025368 |
| Model | CONCS4B5 |
| Frequency Range | 902.2-927.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Series-4 Concentrator, BLT5 |
| Responsible Party | Richard Timko, Quality Engineer, richard.timko@landisgyr.com |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than listed in this composite filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Device is limited to professional installation only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| paCyyzku330hTwl9UYYxNA== | 2013-07-11 | Original Equipment |
| 6iRPONjf9D66BSYVYHd3kg== | 2013-07-11 | Original Equipment |
Grants
TCB Grant - Application paCyyzku330hTwl9UYYxNA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 07/11/2013 Application Dated: 07/11/2013 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4B5 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series-4 Concentrator, BLT5 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.9 | 0.94 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than listed in this composite filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Device is limited to professional installation only. |
EAS Grant - Application paCyyzku330hTwl9UYYxNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 07/11/2013 Application Dated: 07/11/2013 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4B5 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series-4 Concentrator, BLT5 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.9 | 0.94 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than listed in this composite filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Device is limited to professional installation only. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 07/11/2013 Application Dated: 07/11/2013 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4B5 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Series-4 Concentrator, BLT5 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.58 - 917.58 | 0.307 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than listed in this composite filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Device is limited to professional installation only. |
EAS Grant - Application 6iRPONjf9D66BSYVYHd3kg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 07/11/2013 Application Dated: 07/11/2013 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PCONCS4B5 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Series-4 Concentrator, BLT5 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 917.58 - 917.58 | 0.307 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than listed in this composite filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Device is limited to professional installation only. |
| Mail To: |