FCC ID R7PEC6R1S2
Electronic Endpoint Module
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: EC6R1S2
Latest application date: 2015-02-13
FCC ID Device Details
| FCC ID | R7PEC6R1S2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | EC6R1S2 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | Electronic Endpoint Module |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.9 MHz | Class II permissive change or modification of presently authorized equipment | 2015-02-13 |
| 902.2-927.9 MHz | Original Equipment | 2013-08-06 |
| 2405-2475 MHz | Original Equipment | 2013-08-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2015-02-13 | PDF 2 MB |
| Manual | Users Manual | 2013-08-06 | PDF 3.8 MB |
| Internal Photos | Internal Photos | 2013-08-06 | PDF 188.4 KB |
| External Photos | External Photos | 2015-02-13 | PDF 80.5 KB |
| External Photos | External Photos | 2013-08-06 | PDF 136.7 KB |
| Label Information | ID Label/Location Info | 2013-08-06 | PDF 130.8 KB |
| Test Setup Photos | Test Setup Photos | 2015-02-13 | PDF 113.8 KB |
| Test Setup Photos | Test Setup Photos | 2013-08-06 | PDF 189.7 KB |
| Test Report | Test Report | 2015-02-13 | PDF 121.5 KB |
| Test Report DSS | Test Report | 2013-08-06 | PDF 688.7 KB |
| Test Report DTS | Test Report | 2013-08-06 | PDF 548 KB |
| Agency Agreement | Cover Letter(s) | 2015-02-13 | PDF 53.2 KB |
| Confidentiality Request | Cover Letter(s) | 2015-02-13 | PDF 153.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2015-02-13 | PDF 13 KB |
| Agency Agreement | Cover Letter(s) | 2013-08-06 | PDF 52.2 KB |
| Confidentiality Request | Cover Letter(s) | 2013-08-06 | PDF 52.2 KB |
| FCC Cover Letter | Cover Letter(s) | 2013-08-06 | PDF 12.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2013-08-06 | PDF 74.2 KB |
| RF Exposure | RF Exposure Info | 2013-08-06 | PDF 56.5 KB |
Application Information
| Application ID | 4HuC4Y8HgJjPD1mDIW96TQ== |
|---|---|
| Final Action Date | 2015-02-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011025368 |
| Model | EC6R1S2 |
| Frequency Range | 902.2-927.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Electronic Endpoint Module |
| Responsible Party | Richard Timko, Quality Engineer, richard.timko@landisgyr.com , 678-258-1500 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com  , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change to add new antenna type/host configuration as described in this filing. New antenna limited to professional installation only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4HuC4Y8HgJjPD1mDIW96TQ== | 2015-02-13 | Class II permissive change or modification of presently authorized equipment |
| nwse0vyNiaE2wS/UyTfwLA== | 2013-08-06 | Original Equipment |
| 4fO4HEk7rzZwYXC6Wx64hg== | 2013-08-06 | Original Equipment |
Grants
TCB Grant - Application nwse0vyNiaE2wS/UyTfwLA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/06/2013 Application Dated: 08/06/2013 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1S2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electronic Endpoint Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.9 | 0.465 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application nwse0vyNiaE2wS/UyTfwLA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 08/06/2013 Application Dated: 08/06/2013 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1S2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electronic Endpoint Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.9 | 0.465 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 02/13/2015 Application Dated: 02/13/2015 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1S2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electronic Endpoint Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.9 | 0.465 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change to add new antenna type/host configuration as described in this filing. New antenna limited to professional installation only. |
EAS Grant - Application 4HuC4Y8HgJjPD1mDIW96TQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 02/13/2015 Application Dated: 02/13/2015 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1S2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Electronic Endpoint Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.9 | 0.465 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change to add new antenna type/host configuration as described in this filing. New antenna limited to professional installation only. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/06/2013 Application Dated: 08/06/2013 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1S2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic Endpoint Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.091 |
| Modular Approval. Power Output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device must transmit with a source-based, time-averaged duty cycle not to exceed 42% controlled by software or firmware. |
EAS Grant - Application 4fO4HEk7rzZwYXC6Wx64hg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 08/06/2013 Application Dated: 08/06/2013 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1S2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Electronic Endpoint Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.091 |
| Modular Approval. Power Output listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device must transmit with a source-based, time-averaged duty cycle not to exceed 42% controlled by software or firmware. |
| Mail To: |