FCC ID R7PEC6R1X2
2-Way C&I; Gas Meter Endpoint
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: EC6R1X2
Latest application date: 2022-06-07
FCC ID Device Details
| FCC ID | R7PEC6R1X2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | EC6R1X2 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com  sgs.com |
| Equipment Class | 2-Way C&I; Gas Meter Endpoint |
| Test Firm | SGS North America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.8 MHz | Original Equipment | 2022-06-07 |
| 902.2-927.8 MHz | Original Equipment | 2022-06-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-06-07 | PDF 709.8 KB |
| Internal Photos | Internal Photos | 2022-06-07 | PDF 344.2 KB |
| External Photos | External Photos | 2022-06-07 | PDF 437.1 KB |
| Label Location Info | ID Label/Location Info | 2022-06-07 | PDF 362.3 KB |
| Test Setup Photos | Test Setup Photos | 2022-06-07 | PDF 843.5 KB |
| Test Report | Test Report | 2022-06-07 | PDF 2.1 MB |
| Test Report | Test Report | 2022-06-07 | PDF 4 MB |
| Agent Authorization Letter | Cover Letter(s) | 2022-06-07 | PDF 75.5 KB |
| Applicant Declaration Letter | Cover Letter(s) | 2022-06-07 | PDF 123.7 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2022-06-07 | PDF 75.1 KB |
| Modular Letter | Cover Letter(s) | 2022-06-07 | PDF 191.9 KB |
| RF Exposure Info | RF Exposure Info | 2022-06-07 | PDF 371.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 88.7 KB | |
| Schematics Metadata only | Schematics | PDF 1.4 MB | |
| Operational Description Metadata only | Operational Description | PDF 1.1 MB |
Application Information
| Application ID | iJRrZ3vpMdJkvb3ESE5Nzw== |
|---|---|
| Final Action Date | 2022-06-07 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011025368 |
| Model | EC6R1X2 |
| Frequency Range | 902.2-927.8 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2-Way C&I; Gas Meter Endpoint |
| Responsible Party | James L Stortz, Director of Hardware Engineering, jim.stortz@landisgyr.com , 678-258-1500 |
| Agent | Jeremy Jeremy Jeremy, SGS North America, Inc., jeremy.pickens@sgs.com , 7705701800 |
| Technical Contact | Jeremy Pickens, SGS North America, Inc., jeremy.pickens@sgs.com , 7705701800 |
| Non-Technical Contact | Jeremy Pickens, SGS North America, Inc., jeremy.pickens@sgs.com , 7705701800 |
| Test Firm | David Schramm, SGS North America, Inc., david.schramm@sgs.com , 973-461-7914 |
| TCB Email | uscts.tcb@sgs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iJRrZ3vpMdJkvb3ESE5Nzw== | 2022-06-07 | Original Equipment |
| O2BXnYdUkjfMUZeKEOMPXw== | 2022-06-07 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.2-927.8 MHz | 0.6140000 | 15C |
Grants
TCB Grant - Application O2BXnYdUkjfMUZeKEOMPXw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/07/2022 Application Dated: 06/07/2022 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1X2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | 2-Way C&I Gas Meter Endpoint |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.614 |
| Single Modular Approval. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
EAS Grant - Application O2BXnYdUkjfMUZeKEOMPXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 06/07/2022 Application Dated: 06/07/2022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1X2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | 2-Way C&I Gas Meter Endpoint |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.614 |
| Single Modular Approval. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/07/2022 Application Dated: 06/07/2022 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1X2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2-Way C&I Gas Meter Endpoint |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.614 |
| Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
EAS Grant - Application iJRrZ3vpMdJkvb3ESE5Nzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 06/07/2022 Application Dated: 06/07/2022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PEC6R1X2 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2-Way C&I Gas Meter Endpoint |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.614 |
| Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| Mail To: |