FCC ID R7PER1R2S4
L+G FOCUS AX W/ ZIGBEE UTILINET ENDPOINT
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: ER1R2S4
Latest application date: 2007-08-01
FCC ID Device Details
| FCC ID | R7PER1R2S4 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | ER1R2S4 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | L+G FOCUS AX W/ ZIGBEE UTILINET ENDPOINT |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Original Equipment | 2007-08-01 |
| 902.1-927.9 MHz | Original Equipment | 2007-08-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| MANUAL | Users Manual | 2007-08-01 | PDF 1,001.5 KB |
| INTERNAL PHOTOS | External Photos | 2007-08-01 | PDF 785.1 KB |
| INTERNAL PHOTOS | Internal Photos | 2007-08-01 | PDF 785.1 KB |
| LABEL INFORMATION | ID Label/Location Info | 2007-08-01 | PDF 121.3 KB |
| TEST SET UP PHOTOS | Test Setup Photos | 2007-08-01 | PDF 410.9 KB |
| TEST REPORT | Test Report | 2007-08-01 | PDF 302 KB |
| TEST REPORT | Test Report | 2007-08-01 | PDF 326.4 KB |
| CONFIDENTIALITY REQUEST | Cover Letter(s) | 2007-08-01 | PDF 76.6 KB |
| MODULAR APPROVAL REQUEST | Cover Letter(s) | 2007-08-01 | PDF 79.1 KB |
| RF EXPOSURE | RF Exposure Info | 2007-08-01 | PDF 29 KB |
Application Information
| Application ID | b7tASjnsERk6fkT/JVr9zw== |
|---|---|
| Final Action Date | 2007-08-01 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011025368 |
| Model | ER1R2S4 |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | L+G FOCUS AX W/ ZIGBEE UTILINET ENDPOINT |
| Responsible Party | Richard Timko, Quality Engineer, richard.timko@landisgyr.com , 678-258-1500 |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770-831-8048 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Modular approval limited to installation in devices produced by Grantee only. This module must not be incorporated into any device or system without retesting and authorization under a class permissive change. This module may not be sold to the general public. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| b7tASjnsERk6fkT/JVr9zw== | 2007-08-01 | Original Equipment |
| 5IqBjyavpL87DxzB8BO3Fw== | 2007-08-01 | Original Equipment |
Grants
TCB Grant - Application b7tASjnsERk6fkT/JVr9zw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 08/01/2007 Application Dated: 07/31/2007 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PER1R2S4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | L+G FOCUS AX W/ ZIGBEE UTILINET ENDPOINT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0022 |
| Power listed is conducted. Modular approval limited to installation in devices produced by Grantee only. This module must not be incorporated into any device or system without retesting and authorization under a class permissive change. This module may not be sold to the general public. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application b7tASjnsERk6fkT/JVr9zw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States | Date of Grant: 08/01/2007 Application Dated: 07/31/2007 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PER1R2S4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | L+G FOCUS AX W/ ZIGBEE UTILINET ENDPOINT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0022 |
| Power listed is conducted. Modular approval limited to installation in devices produced by Grantee only. This module must not be incorporated into any device or system without retesting and authorization under a class permissive change. This module may not be sold to the general public. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
|
| Mail To: |
| EA276866 |
TCB Grant - Application 5IqBjyavpL87DxzB8BO3Fw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 08/01/2007 Application Dated: 07/31/2007 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PER1R2S4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | L+G FOCUS AX W/ ZIGBEE UTILINET ENDPOINT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.062 |
| Power listed is conducted. Modular approval limited to installation in devices produced by Grantee only. This module must not be incorporated into any device or system without retesting and authorization under a class permissive change. This module may not be sold to the general public. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
|
EAS Grant - Application 5IqBjyavpL87DxzB8BO3Fw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States | Date of Grant: 08/01/2007 Application Dated: 07/31/2007 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PER1R2S4 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | L+G FOCUS AX W/ ZIGBEE UTILINET ENDPOINT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.062 |
| Power listed is conducted. Modular approval limited to installation in devices produced by Grantee only. This module must not be incorporated into any device or system without retesting and authorization under a class permissive change. This module may not be sold to the general public. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
|
| Mail To: |
| EA235040 |