FCC ID R7PER6R1S2

M120 Module

by Landis+Gyr Technology, Inc.

Grantee Code: R7P   Product Code: ER6R1S2
Latest application date: 2015-06-23

FCC ID Device Details

FCC IDR7PER6R1S2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeR7P
Product CodeER6R1S2
Applicant BusinessLandis+Gyr Technology, Inc. 🇺🇸
Related Domains landisgyr.com
Equipment ClassM120 Module
Test FirmAdvanced Compliance Solutions, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.3-927.9 MHzOriginal Equipment2015-06-23
902.3-927.5 MHzOriginal Equipment2015-06-23

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2015-06-23PDF 225.6 KB
Internal PhotosInternal Photos2015-06-23PDF 172.6 KB
External PhotosExternal Photos2015-06-23PDF 206.3 KB
Label InformationID Label/Location Info2015-06-23PDF 110.6 KB
Test Setup PhotosTest Setup Photos2015-06-23PDF 375 KB
Test ReportTest Report2015-06-23PDF 355.8 KB
Test ReportTest Report2015-06-23PDF 1.3 MB
Agency AgreementCover Letter(s)2015-06-23PDF 42.9 KB
Confidentiality RequestCover Letter(s)2015-06-23PDF 42.9 KB
FCC Cover LetterCover Letter(s)2015-06-23PDF 12.8 KB
Modular Approval LetterCover Letter(s)2015-06-23PDF 43.8 KB
RF ExposureRF Exposure Info2015-06-23PDF 42 KB
Block Diagram Metadata onlyBlock DiagramPDF 171.5 KB
Schematics Metadata onlySchematicsPDF 272.1 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 1.4 MB

Application Information

Application IDisfRs46OTwHry5wqmhFjdA==
Final Action Date2015-06-23
Application PurposeOriginal Equipment
Applicant FRN0011025368
ModelER6R1S2
Frequency Range902.3-927.9 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionM120 Module
Responsible PartyJames L Stortz, Director of Hardware Engineering, jim.stortz@landisgyr.com , 678-258-1500
AgentSam Sam Sam, Advanced Compliance Solutions, Inc.
Test FirmRandy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048
TCB Emailjwoods@acstestlab.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
isfRs46OTwHry5wqmhFjdA==2015-06-23Original Equipment
crrdfZUqxKZ6SGEOSz4LHg==2015-06-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.3-927.5 MHz15CCC
902.3-927.9 MHz0.288000015CCC

Grants

TCB Grant - Application isfRs46OTwHry5wqmhFjdA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 06/23/2015

Application Dated: 06/23/2015
Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PER6R1S2
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: M120 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.9 0.288  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application isfRs46OTwHry5wqmhFjdA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
United States
  Date of Grant: 06/23/2015

Application Dated: 06/23/2015
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PER6R1S2
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: M120 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.9 0.288  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application crrdfZUqxKZ6SGEOSz4LHg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 06/23/2015

Application Dated: 06/23/2015
Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PER6R1S2
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Low Power Transceiver, Rx Verified
Notes: M120 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.5  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application crrdfZUqxKZ6SGEOSz4LHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
United States
  Date of Grant: 06/23/2015

Application Dated: 06/23/2015
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PER6R1S2
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Low Power Transceiver, Rx Verified
Notes: M120 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.5  


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: