FCC ID R7PIWRS3
UTILITY USAGE RF DATA COLLECTION DEVICE
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: IWRS3
Latest application date: 2009-09-01
FCC ID Device Details
| FCC ID | R7PIWRS3 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | IWRS3 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.1-927.9 MHz | Class II permissive change or modification of presently authorized equipment | 2009-09-01 |
| 902.1-927.9 MHz | Class II permissive change or modification of presently authorized equipment | 2005-09-28 |
| 902.1-927.9 MHz | Original Equipment | 2004-09-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2004-09-13 | PDF 1,010.5 KB |
| INTERNAL PHOTOS | Internal Photos | 2004-09-13 | PDF 500.4 KB |
| EXTERNAL PHOTOS | External Photos | 2004-09-13 | PDF 98.2 KB |
| ID LABEL | ID Label/Location Info | 2004-09-13 | PDF 357.4 KB |
| OPERATIONAL DESCRIPTION | Operational Description | 2004-09-13 | PDF 78.9 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2004-09-13 | PDF 93.4 KB |
| TEST REPORT | Test Report | 2005-09-28 | PDF 666.8 KB |
| TEST REPORT | Test Report | 2004-09-13 | PDF 62.5 KB |
| TEST REPORT 1 | Test Report | 2004-09-13 | PDF 101.3 KB |
| TEST REPORT 2 | Test Report | 2004-09-13 | PDF 240.4 KB |
| Agency Agreement | Cover Letter(s) | 2009-09-01 | PDF 56 KB |
| FCC Cover Letter | Cover Letter(s) | 2009-09-01 | PDF 17.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2009-09-01 | PDF 80.8 KB |
| CLASS II CHANGE LETTER | Cover Letter(s) | 2005-09-28 | PDF 83.4 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2004-09-13 | PDF 32.2 KB |
| RF EXPOSURE | RF Exposure Info | 2004-09-13 | PDF 89.6 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 137.8 KB | |
| SCHEMAITCS Metadata only | Schematics | PDF 203 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 107.5 KB |
Application Information
| Application ID | 9khUD4ClHo/chjz/kX4zQw== |
|---|---|
| Final Action Date | 2009-09-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011025368 |
| Model | IWRS3 |
| Frequency Range | 902.1-927.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Responsible Party | Richard Timko, Quality Engineer, richard.timko@landisgyr.com , 678-258-1500 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc, swismer@acstestlab.com  , 770 831 8048 |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class 2 Change to authorize a non-modular to limited single modular approval. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9khUD4ClHo/chjz/kX4zQw== | 2009-09-01 | Class II permissive change or modification of presently authorized equipment |
| NHK0XEQDs07QpomeRN+tmg== | 2005-09-28 | Class II permissive change or modification of presently authorized equipment |
| 5LMvKIoPCa1/QSdPwYdlLw== | 2004-09-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.1-927.9 MHz | 0.9440000 | 15C |
Grants
TCB Grant - Application NHK0XEQDs07QpomeRN+tmg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/28/2005 Application Dated: 09/28/2005 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PIWRS3 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application NHK0XEQDs07QpomeRN+tmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 09/28/2005 Application Dated: 09/28/2005 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PIWRS3 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 09/01/2009 Application Dated: 08/31/2009 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PIWRS3 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class 2 Change to authorize a non-modular to limited single modular approval. |
EAS Grant - Application 9khUD4ClHo/chjz/kX4zQw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 09/01/2009 Application Dated: 08/31/2009 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PIWRS3 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class 2 Change to authorize a non-modular to limited single modular approval. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/13/2004 Application Dated: 09/13/2004 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PIWRS3 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
EAS Grant - Application 5LMvKIoPCa1/QSdPwYdlLw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 09/13/2004 Application Dated: 09/13/2004 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PIWRS3 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILITY USAGE RF DATA COLLECTION DEVICE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |