FCC ID R7PNG0R1S1
UtiliNet SCADA Single Board Radio
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: NG0R1S1
Latest application date: 2013-03-20
FCC ID Device Details
| FCC ID | R7PNG0R1S1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | NG0R1S1 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | UtiliNet SCADA Single Board Radio |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.1-927.9 MHz | Class II permissive change or modification of presently authorized equipment | 2013-03-20 |
| 902.1-927.9 MHz | Original Equipment | 2008-12-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2008-12-05 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2013-03-20 | PDF 51.4 KB |
| Internal Photos | Internal Photos | 2008-12-05 | PDF 633.5 KB |
| External Photos | External Photos | 2013-03-20 | PDF 89.2 KB |
| External Photos | External Photos | 2008-12-05 | PDF 18.3 KB |
| Label Information | ID Label/Location Info | 2008-12-05 | PDF 94.3 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-20 | PDF 197.1 KB |
| Test Setup Photos | Test Setup Photos | 2008-12-05 | PDF 298.1 KB |
| Test Report | Test Report | 2013-03-20 | PDF 301.4 KB |
| Test Report | Test Report | 2008-12-05 | PDF 413.8 KB |
| Agency Agreement | Cover Letter(s) | 2013-03-20 | PDF 52 KB |
| Confidentiality Request | Cover Letter(s) | 2013-03-20 | PDF 50.5 KB |
| FCC Cover Letter | Cover Letter(s) | 2013-03-20 | PDF 12.4 KB |
| Agency Agreement | Cover Letter(s) | 2008-12-05 | PDF 23.9 KB |
| Confidential Letter | Cover Letter(s) | 2008-12-05 | PDF 18.8 KB |
| Cover Letter | Cover Letter(s) | 2008-12-05 | PDF 17.9 KB |
| Modular Approval | Cover Letter(s) | 2008-12-05 | PDF 97.3 KB |
| RF Exposure | RF Exposure Info | 2008-12-05 | PDF 28.8 KB |
Application Information
| Application ID | 5kQvVe1RX2lfBFzK4uLThg== |
|---|---|
| Final Action Date | 2013-03-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011025368 |
| Model | NG0R1S1 |
| Frequency Range | 902.1-927.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | UtiliNet SCADA Single Board Radio |
| Responsible Party | Richard Timko, Quality Engineer, richard.timko@landisgyr.com , 678-258-1500 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com  , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 5kQvVe1RX2lfBFzK4uLThg== | 2013-03-20 | Class II permissive change or modification of presently authorized equipment |
| Nwkjmj6wQdgL1B2OailOtg== | 2008-12-05 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.1-927.9 MHz | 0.1330000 | 15C |
Grants
TCB Grant - Application Nwkjmj6wQdgL1B2OailOtg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 12/05/2008 Application Dated: 12/05/2008 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG0R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILINET SCADA SINGLE BOARD RADIO |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.133 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application Nwkjmj6wQdgL1B2OailOtg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 12/05/2008 Application Dated: 12/05/2008 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG0R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UTILINET SCADA SINGLE BOARD RADIO |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.133 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 03/20/2013 Application Dated: 03/20/2013 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG0R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UtiliNet SCADA Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.133 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change as described in this filing. |
EAS Grant - Application 5kQvVe1RX2lfBFzK4uLThg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 03/20/2013 Application Dated: 03/20/2013 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG0R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UtiliNet SCADA Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.133 |
| Modular Approval. Power listed is conducted. This is an OEM module is restricted for use with the specific antenna(s) tested for in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including different antenna configurations. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change as described in this filing. |
| Mail To: |