1. FCC ID
  2. R7P
  3. R7PNG0R1S7

FCC ID R7PNG0R1S7

Electricity Meter Module

by Landis+Gyr Technology, Inc.

Grantee Code: R7P   Product Code: NG0R1S7
Latest application date: 2025-06-27

FCC ID Device Details

FCC IDR7PNG0R1S7
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeR7P
Product CodeNG0R1S7
Applicant BusinessLandis+Gyr Technology, Inc. 🇺🇸
Related Domains landisgyr.com
Equipment ClassElectricity Meter Module
Test FirmTUV SUD America, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
904-927.8 MHzClass II permissive change or modification of presently authorized equipment2025-06-27
902.2-927.8 MHzClass II permissive change or modification of presently authorized equipment2022-03-17
902.2-927.8 MHzOriginal Equipment2021-11-19

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2021-11-19PDF 784.6 KB
Internal PhotosInternal Photos2025-06-27PDF 292.6 KB
Internal PhotosInternal Photos2021-11-19PDF 121.3 KB
External PhotosExternal Photos2022-03-17PDF 2.2 MB
External PhotosExternal Photos2021-11-19PDF 100.4 KB
Label InformationID Label/Location Info2021-11-19PDF 150.3 KB
Test Setup PhotosTest Setup Photos2025-06-27PDF 709.4 KB
Test Setup PhotosTest Setup Photos2022-03-17PDF 549.2 KB
Test Setup PhotosTest Setup Photos2021-11-19PDF 859.8 KB
Test ReportTest Report2025-06-27PDF 1,014.4 KB
Test ReportTest Report2022-03-17PDF 842.6 KB
Test ReportTest Report2021-11-19PDF 4.7 MB
2.911(d)(5)(i)-(ii) Covered EquipmentAttestation Statements2025-06-27PDF 122.7 KB
2.911(d)(7) Agent of ServiceAttestation Statements2025-06-27PDF 121.9 KB
Agency AgreementCover Letter(s)2025-06-27PDF 74.3 KB
C2PC Cover LetterCover Letter(s)2025-06-27PDF 106 KB
Confidentiality RequestCover Letter(s)2025-06-27PDF 73.4 KB
Agency AgreementCover Letter(s)2022-03-17PDF 69.6 KB
C2PC Cover LetterCover Letter(s)2022-03-17PDF 58.2 KB
Agency AgreementCover Letter(s)2021-11-19PDF 75.7 KB
Confidentiality RequestCover Letter(s)2021-11-19PDF 75.3 KB
Modular Approval LetterCover Letter(s)2021-11-19PDF 79.7 KB
RF ExposureRF Exposure Info2025-06-27PDF 308.7 KB
RF ExposureRF Exposure Info2022-03-17PDF 46.6 KB
RF ExposureRF Exposure Info2021-11-19PDF 46.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 70.3 KB
Schematics Metadata onlySchematicsPDF 1 MB
Schematics Metadata onlySchematicsPDF 876 KB
Operational Description Metadata onlyOperational DescriptionPDF 1,017.4 KB

Application Information

Application IDrbjGn9qTFbHMxODUNe5n2w==
Final Action Date2025-06-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0011025368
ModelNG0R1S7
Frequency Range904-927.8 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionElectricity Meter Module
Responsible PartyTou Lee, Manager, Comms HW QA and Compliance, Tou.Lee@landisgyr.com , 404-907-6832
AgentRossana Rossana Rossana, TUV SUD America
Test FirmWilliam Elliott, TUV SUD America, Inc., William.Elliott@tuvsud.com , 813-284-2736
TCB Emailjeff.woods@tuvsud.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC to address part changes and add new mode of operation as described in this filing.

Applications

Application IDDatePurpose
rbjGn9qTFbHMxODUNe5n2w==2025-06-27Class II permissive change or modification of presently authorized equipment
XdmyVnm1JPwD+1SYWE0A2A==2022-03-17Class II permissive change or modification of presently authorized equipment
j+9rsAwr8BbJeDw3qp+bUQ==2021-11-19Original Equipment

Equipment Authorization

FrequencyOutputRules
902.2-927.8 MHz0.76915C
902.3-927.8 MHz0.65315C
902.3-927.8 MHz0.653
902.3-927.5 MHz0.611
902.4-927.6 MHz0.63515C
902.4-927.6 MHz0.635
904-927.8 MHz0.64815C
904-927.8 MHz0.648

Grants

TCB Grant - Application XdmyVnm1JPwD+1SYWE0A2A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 03/17/2022

Application Dated: 03/09/2022
Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PNG0R1S7
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Electricity Meter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.8 0.653  
15C 904.0  -  927.8 0.648  
15C 902.4  -  927.6 0.635  
15C 902.2  -  927.8 0.769  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

C2PC to add new antenna/host combination as described in this filing.


EAS Grant - Application XdmyVnm1JPwD+1SYWE0A2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
United States 		  Date of Grant: 03/17/2022

Application Dated: 03/09/2022
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PNG0R1S7
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Electricity Meter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.8 0.653  
15C 904.0  -  927.8 0.648  
15C 902.4  -  927.6 0.635  
15C 902.2  -  927.8 0.769  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

C2PC to add new antenna/host combination as described in this filing.



TCB Grant - Application rbjGn9qTFbHMxODUNe5n2w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 06/27/2025

Application Dated: 06/27/2025
Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
 
Attention: Tou Lee , Manager, Comms HW QA and Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PNG0R1S7
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Electricity Meter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.8 0.653  
15C 902.3  -  927.5 0.611  
15C 904.0  -  927.8 0.648  
15C 902.4  -  927.6 0.635  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

C2PC to address part changes and add new mode of operation as described in this filing.


TCB Grant - Application j+9rsAwr8BbJeDw3qp+bUQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
 Date of Grant: 11/19/2021

Application Dated: 11/19/2021
Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PNG0R1S7
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Electricity Meter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.8 0.653  
15C 904.0  -  927.8 0.648  
15C 902.4  -  927.6 0.635  
15C 902.2  -  927.8 0.769  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application j+9rsAwr8BbJeDw3qp+bUQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Landis+Gyr Technology, Inc.
30000 Mill Creek Avenue, Suite 100
Alpharetta, GA 30022
United States 		  Date of Grant: 11/19/2021

Application Dated: 11/19/2021
 
Attention: James Stortz , Director of Hardware Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  R7PNG0R1S7
Name of Grantee:  Landis+Gyr Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Electricity Meter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.3  -  927.8 0.653  
15C 904.0  -  927.8 0.648  
15C 902.4  -  927.6 0.635  
15C 902.2  -  927.8 0.769  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: