FCC ID R7PNG1R1S1
NIC AM
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: NG1R1S1
Latest application date: 2020-04-01
FCC ID Device Details
| FCC ID | R7PNG1R1S1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | NG1R1S1 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | NIC AM |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.2-927.8 MHz | Class II permissive change or modification of presently authorized equipment | 2020-04-01 |
| 902.2-927.8 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-05 |
| 902.2-927.8 MHz | Original Equipment | 2018-05-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2020-04-01 | PDF 1.1 MB |
| User Manual | Users Manual | 2019-03-05 | PDF 1.2 MB |
| Manual | Users Manual | 2018-05-03 | PDF 575.8 KB |
| Internal Photos | Internal Photos | 2018-05-03 | PDF 869.9 KB |
| External Photos | External Photos | 2020-04-01 | PDF 780.3 KB |
| External Photos | External Photos | 2018-05-03 | PDF 1.6 MB |
| Label Information | ID Label/Location Info | 2018-05-03 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2020-04-01 | PDF 441.3 KB |
| Test Setup Photos | Test Setup Photos | 2019-03-05 | PDF 656.5 KB |
| Test Setup Photos | Test Setup Photos | 2018-05-03 | PDF 279.4 KB |
| Test Report | Test Report | 2020-04-01 | PDF 777.2 KB |
| Test Report | Test Report | 2019-03-05 | PDF 634.7 KB |
| Test Report | Test Report | 2018-05-03 | PDF 4.8 MB |
| Agency Agreement Letter | Cover Letter(s) | 2020-04-01 | PDF 59.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2020-04-01 | PDF 61.4 KB |
| Agent Letter | Cover Letter(s) | 2019-03-05 | PDF 82.4 KB |
| C2PC Letter | Cover Letter(s) | 2019-03-05 | PDF 84.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-03-05 | PDF 103 KB |
| Agency Agreement Letter | Cover Letter(s) | 2018-05-03 | PDF 77.9 KB |
| Confidentiality Request | Cover Letter(s) | 2018-05-03 | PDF 76.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2018-05-03 | PDF 50.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2018-05-03 | PDF 74.6 KB |
| RF Exposure | RF Exposure Info | 2020-04-01 | PDF 31.8 KB |
| RF Exposure Report | RF Exposure Info | 2019-03-05 | PDF 31.9 KB |
| RF Exposure | RF Exposure Info | 2018-05-03 | PDF 43.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 217.7 KB | |
| Schematics Metadata only | Schematics | PDF 495.1 KB | |
| Operating Description Metadata only | Operational Description | PDF 54.2 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 2.5 MB |
Application Information
| Application ID | 2jENbzzhnyD9U03OVbHg5Q== |
|---|---|
| Final Action Date | 2020-04-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011025368 |
| Model | NG1R1S1 |
| Frequency Range | 902.2-927.8 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | NIC AM |
| Responsible Party | James L Stortz, Director of Hardware Engineering, jim.stortz@landisgyr.com , 678-258-1500 |
| Agent | Marlene Marlene Marlene, TUV SUD America |
| Test Firm | William Elliott, TUV SUD America, Inc., William.Elliott@tuvsud.com  , 813-284-2736 |
| TCB Email | jeff.woods@tuvsud.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type as described in this filing. Output power must be reduced to 329mW when using this new antenna. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 2jENbzzhnyD9U03OVbHg5Q== | 2020-04-01 | Class II permissive change or modification of presently authorized equipment |
| P2mZd5mEwl37GILHc75jPw== | 2019-03-05 | Class II permissive change or modification of presently authorized equipment |
| HxAQDB9pVdt+HM4VchbQ2g== | 2018-05-03 | Original Equipment |
Grants
TCB Grant - Application P2mZd5mEwl37GILHc75jPw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG1R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series 5 Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.82 | |||
| 15C | 904.0 - 927.9 | 0.82 |
| C2PC as described in this filing. Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application P2mZd5mEwl37GILHc75jPw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 03/05/2019 Application Dated: 03/05/2019 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG1R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Series 5 Single Board Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.82 | |||
| 15C | 904.0 - 927.9 | 0.82 |
| C2PC as described in this filing. Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 05/03/2018 Application Dated: 05/03/2018 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG1R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | NIC AM |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.82 | |||
| 15C | 904.0 - 927.9 | 0.82 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application HxAQDB9pVdt+HM4VchbQ2g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 05/03/2018 Application Dated: 05/03/2018 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG1R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | NIC AM |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.82 | |||
| 15C | 904.0 - 927.9 | 0.82 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 04/01/2020 Application Dated: 04/01/2020 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG1R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | NIC AM |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.82 | |||
| 15C | 904.0 - 927.9 | 0.82 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type as described in this filing. Output power must be reduced to 329mW when using this new antenna. |
EAS Grant - Application 2jENbzzhnyD9U03OVbHg5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 04/01/2020 Application Dated: 04/01/2020 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PNG1R1S1 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | NIC AM |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.82 | |||
| 15C | 904.0 - 927.9 | 0.82 |
| Modular Approval. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type as described in this filing. Output power must be reduced to 329mW when using this new antenna. |
| Mail To: |