FCC ID R7PTOP04
Take Out Point (TOP)
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: TOP04
Latest application date: 2008-10-08
FCC ID Device Details
| FCC ID | R7PTOP04 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | TOP04 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | Take Out Point (TOP) |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.1-927.9 MHz | Class II permissive change or modification of presently authorized equipment | 2008-10-08 |
| 902.1-927.9 MHz | Original Equipment | 2005-12-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2005-12-13 | PDF 92.5 KB |
| INTERNAL PHOTOS | Internal Photos | 2005-12-13 | PDF 294.6 KB |
| EXTERNAL PHOTOS | External Photos | 2005-12-13 | PDF 135.3 KB |
| MODIFICATION PHOTOS | External Photos | 2005-12-13 | PDF 408 KB |
| LABEL INFORMATION | ID Label/Location Info | 2005-12-13 | PDF 260.2 KB |
| Test Setup Photos | Test Setup Photos | 2008-10-08 | PDF 329.4 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2005-12-13 | PDF 98.7 KB |
| Test Report | Test Report | 2008-10-08 | PDF 69.8 KB |
| TEST REPORT | Test Report | 2005-12-13 | PDF 214.5 KB |
| Modification Letter | Cover Letter(s) | 2008-10-08 | PDF 23.5 KB |
| Agency Agreement | Cover Letter(s) | 2008-10-08 | PDF 23.9 KB |
| Confidential Letter | Cover Letter(s) | 2008-10-08 | PDF 24.2 KB |
| Cover Letter | Cover Letter(s) | 2008-10-08 | PDF 18.1 KB |
| CONFIDENTILAITY LETTER | Cover Letter(s) | 2005-12-13 | PDF 146.2 KB |
| MODIFICATION LETTER | Cover Letter(s) | 2005-12-13 | PDF 98.4 KB |
| RF EXPOSURE | RF Exposure Info | 2005-12-13 | PDF 30.6 KB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 138.3 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 255.5 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 31.6 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 788 KB |
Application Information
| Application ID | qQ553mIG4NQN3g6oLyjwww== |
|---|---|
| Final Action Date | 2008-10-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011025368 |
| Model | TOP04 |
| Frequency Range | 902.1-927.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Take Out Point (TOP) |
| Responsible Party | Richard Timko, Quality Engineer, richard.timko@landisgyr.com , 678-258-1500 |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770-831-8048 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is Conducted. This device, including its antenna(s), must be professionally installed. The antenna(s) used for this transmitter must be fixed mounted on an outdoor permanent structure with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qQ553mIG4NQN3g6oLyjwww== | 2008-10-08 | Class II permissive change or modification of presently authorized equipment |
| GrclFBtHbiwVHjjsUWSpSQ== | 2005-12-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.1-927.9 MHz | 0.9440000 | 15C |
Grants
TCB Grant - Application qQ553mIG4NQN3g6oLyjwww==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/08/2008 Application Dated: 10/08/2008 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PTOP04 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Take Out Point (TOP) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device, including its antenna(s), must be professionally installed. The antenna(s) used for this transmitter must be fixed mounted on an outdoor permanent structure with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application qQ553mIG4NQN3g6oLyjwww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 10/08/2008 Application Dated: 10/08/2008 |
| Attention: Richard Timko , Quality Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PTOP04 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Take Out Point (TOP) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device, including its antenna(s), must be professionally installed. The antenna(s) used for this transmitter must be fixed mounted on an outdoor permanent structure with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/13/2005 Application Dated: 12/13/2005 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PTOP04 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | TAKE OUT POINT (TOP) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device, including its antenna(s), must be professionally installed. The antenna(s) used for this transmitter must be fixed mounted on an outdoor permanent structure with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application GrclFBtHbiwVHjjsUWSpSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 12/13/2005 Application Dated: 12/13/2005 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PTOP04 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | TAKE OUT POINT (TOP) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.1 - 927.9 | 0.944 |
| Power listed is Conducted. This device, including its antenna(s), must be professionally installed. The antenna(s) used for this transmitter must be fixed mounted on an outdoor permanent structure with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |