FCC ID R7PWFM200
Wi-Fi 802.11 bgn SiP transceiver radio module
by Landis+Gyr Technology, Inc.
Grantee Code: R7P Product Code: WFM200
Latest application date: 2022-06-28
FCC ID Device Details
| FCC ID | R7PWFM200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | R7P |
| Product Code | WFM200 |
| Applicant Business | Landis+Gyr Technology, Inc. 🇺🇸 |
| Related Domains |  landisgyr.com |
| Equipment Class | Wi-Fi 802.11 bgn SiP transceiver radio module |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-28 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: QOQWFM200 Grant Date: 10/02/2019 | 2022-06-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2022-06-15 | PDF 732 KB |
| Label Information | ID Label/Location Info | 2022-06-15 | PDF 151.3 KB |
| Test Setup Photos | Test Setup Photos | 2022-06-28 | PDF 702.9 KB |
| Test Report | Test Report | 2022-06-28 | PDF 1.3 MB |
| Agency Agreement | Cover Letter(s) | 2022-06-28 | PDF 75.6 KB |
| C2PC Cover Letter | Cover Letter(s) | 2022-06-28 | PDF 58.2 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2022-06-15 | PDF 472.5 KB |
| Change in ID Request Letter | Cover Letter(s) | 2022-06-15 | PDF 75.1 KB |
| RF Exposure | RF Exposure Info | 2022-06-28 | PDF 46.7 KB |
Application Information
| Application ID | 5HXCF+JIchQz4KA3ChGkwg== |
|---|---|
| Final Action Date | 2022-06-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011025368 |
| Model | WFM200 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi 802.11 bgn SiP transceiver radio module |
| Responsible Party | James L Stortz, Director of Hardware Engineering, jim.stortz@landisgyr.com , 678-258-1500 |
| Agent | Kirby Kirby Kirby, TUV SUD America |
| Test Firm | William Elliott, TUV SUD America, Inc., William.Elliott@tuvsud.com  , 813-284-2736 |
| TCB Email | jeff.woods@tuvsud.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31 (k) composite system. C2PC to add new antenna type as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 5HXCF+JIchQz4KA3ChGkwg== | 2022-06-28 | Class II permissive change or modification of presently authorized equipment |
| WYOyGk+MGxfsYM10I7/cjw== | 2022-06-15 | Change in identification of presently authorized equipment. Original FCC ID: QOQWFM200 Grant Date: 10/02/2019 |
Equipment Authorization
Grants
TCB Grant - Application WYOyGk+MGxfsYM10I7/cjw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/15/2022 Application Dated: 06/15/2022 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PWFM200 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 802.11 bgn SiP transceiver radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.044 | |||
| 15C | 2412.0 - 2462.0 | 0.022 | |||
| 15C | 2412.0 - 2462.0 | 0.02 |
| The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31 (k) composite system. |
EAS Grant - Application WYOyGk+MGxfsYM10I7/cjw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 06/15/2022 Application Dated: 06/15/2022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PWFM200 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 802.11 bgn SiP transceiver radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.044 | |||
| 15C | 2412.0 - 2462.0 | 0.022 | |||
| 15C | 2412.0 - 2462.0 | 0.02 |
| The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31 (k) composite system. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 06/28/2022 Application Dated: 06/28/2022 |
| Landis+Gyr Technology, Inc. |
| 30000 Mill Creek Avenue, Suite 100 |
| Alpharetta, GA 30022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PWFM200 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 802.11 bgn SiP transceiver radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.044 | |||
| 15C | 2412.0 - 2462.0 | 0.022 | |||
| 15C | 2412.0 - 2462.0 | 0.02 |
| The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31 (k) composite system. C2PC to add new antenna type as described in this filing. |
EAS Grant - Application 5HXCF+JIchQz4KA3ChGkwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Landis+Gyr Technology, Inc. 30000 Mill Creek Avenue, Suite 100 Alpharetta, GA 30022 United States |
Date of Grant: 06/28/2022 Application Dated: 06/28/2022 |
| Attention: James Stortz , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R7PWFM200 |
| Name of Grantee: | Landis+Gyr Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 802.11 bgn SiP transceiver radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.044 | |||
| 15C | 2412.0 - 2462.0 | 0.022 | |||
| 15C | 2412.0 - 2462.0 | 0.02 |
| The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31 (k) composite system. C2PC to add new antenna type as described in this filing. |
| Mail To: |