FCC ID RAS-MT7922A12L

2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card

by MediaTek Inc.

Grantee Code: RAS   Product Code: MT7922A12L
Latest application date: 2026-09-29

FCC ID Device Details

FCC IDRAS-MT7922A12L
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRAS
Product CodeMT7922A12L
Applicant BusinessMediaTek Inc. 🇹🇼
Related Domains mediatek.com
Equipment Class2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5865-5885 MHzClass II permissive change or modification of presently authorized equipment2026-09-29
6535-6855 MHzClass II permissive change or modification of presently authorized equipment2026-09-29
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2026-09-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-09-29
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
5865-5885 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
6535-6855 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
6535-6855 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
5865-5885 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2026-05-15
5955-7115 MHzOriginal Equipment2026-01-29
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2025-07-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-07-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-07-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2025-07-21
5865-5885 MHzClass II permissive change or modification of presently authorized equipment2025-03-05
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2025-03-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-03-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-03-05
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2024-11-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-11-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-11-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-11-07
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2024-10-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-10-22
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2024-10-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-10-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-10-22
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2024-06-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-06-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-06-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-06-13
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2024-06-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-05-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-05-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-05-23
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2024-05-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-05-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-05-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-05-02
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2024-05-02
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2024-04-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-04-09
5865-5885 MHzClass II permissive change or modification of presently authorized equipment2024-04-09
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2024-04-09
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-02-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-02-15
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2024-02-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-02-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-02-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-02-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-02-07
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2024-02-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-01-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-01-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-01-31
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2024-01-31
6535-6855 MHzOriginal Equipment2023-10-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-09-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-09-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-09-21
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2023-09-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-06-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-06-19
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2023-06-19
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2023-06-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-05-03
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2023-05-03
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2023-05-03
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2023-05-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-02-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-02-22
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2023-02-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-02-22
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-08-04
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-05-09
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-05-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-05-09
5865-5885 MHzClass II permissive change or modification of presently authorized equipment2022-04-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-04-18
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-04-18
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2022-04-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-03-09
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-03-09
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-03-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-28
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-02-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-02-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-14
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-02-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-02-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-02-14
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-02-07
5865-5885 MHzClass II permissive change or modification of presently authorized equipment2022-02-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-11-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-11-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-11-11
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2021-11-11
2402-2480 MHzOriginal Equipment2021-10-05
5180-5240 MHzOriginal Equipment2021-10-05
5955-7115 MHzOriginal Equipment2021-10-05
2402-2480 MHzOriginal Equipment2021-10-05

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2026-10-01PDF 4.7 MB
Users ManualUsers Manual2026-05-20PDF 1.9 MB
Users ManualUsers Manual2026-05-20PDF 1.9 MB
Users Manual (Statemment)Users Manual2026-05-20PDF 194.4 KB
Users Manual_StatementUsers Manual2026-05-20PDF 194.4 KB
Users ManualUsers Manual2026-03-15PDF 1.8 MB
Users Manual _Part 1Users Manual2026-01-14PDF 2 MB
Users Manual _Part 2Users Manual2026-01-14PDF 730.7 KB
User ManualUsers Manual2025-05-06PDF 5.6 MB
User Manual IIUsers Manual2025-05-06PDF 950.2 KB
Users ManualUsers Manual2025-03-05PDF 1.9 MB
Internal PhotosInternal Photos2026-10-01PDF 3.6 MB
Internal PhotosInternal Photos2026-05-20PDF 1.9 MB
Internal PhotosInternal Photos2026-05-20PDF 3.5 MB
Internal PhotosInternal Photos2026-03-15PDF 610.8 KB
Internal PhotosInternal Photos2026-01-14PDF 3.1 MB
Internal PhotosInternal Photos2025-05-06PDF 539.9 KB
External PhotosExternal Photos2026-10-01PDF 1.2 MB
External PhotosExternal Photos2026-05-20PDF 1.2 MB
External PhotosExternal Photos2026-05-20PDF 1.4 MB
External PhotosExternal Photos2026-03-15PDF 1.3 MB
External PhotosExternal Photos2026-01-14PDF 1.1 MB
External PhotosExternal Photos2025-05-06PDF 1.2 MB
ID Label/Location InfoID Label/Location Info2026-09-29PDF 821.8 KB
ID Label & LocationID Label/Location Info2026-05-15PDF 86.9 KB
ID Label & LocationID Label/Location Info2026-05-15PDF 74.6 KB
ID Label/Location InfoID Label/Location Info2026-01-29PDF 47.6 KB
ID Label/Location InfoID Label/Location Info2025-07-21PDF 425 KB
Test Set Up Photos_Antenna Report_INNOWAVETest Setup Photos2026-10-01PDF 510.7 KB
Test Set Up Photos_Antenna Report_LuxshareTest Setup Photos2026-10-01PDF 489.8 KB
Test Set Up Photos_SARTest Setup Photos2026-10-01PDF 1.1 MB
Test Set Up Photos (Antenna spec._NB_AWAN_1)Test Setup Photos2026-05-20PDF 133.8 KB
Test Set Up Photos (Antenna spec._NB_AWAN_1)Test Setup Photos2026-05-20PDF 133.9 KB
Test Set Up Photos (Antenna spec._NB_AWAN_2)Test Setup Photos2026-05-20PDF 256.8 KB
Test Set Up Photos (Antenna spec._NB_HB_1)Test Setup Photos2026-05-20PDF 227.9 KB
Test Set Up Photos (Antenna spec._NB_HB_1)Test Setup Photos2026-05-20PDF 227.8 KB
Test Set Up Photos (Antenna spec._NB_HB_2)Test Setup Photos2026-05-20PDF 256.9 KB
Test Set Up Photos (Antenna spec._TB_AWAN_1)Test Setup Photos2026-05-20PDF 133.9 KB
Test Set Up Photos (Antenna spec._TB_AWAN_2)Test Setup Photos2026-05-20PDF 298 KB
Test Set Up Photos (Antenna spec._TB_HB_1)Test Setup Photos2026-05-20PDF 227.9 KB
Test Set Up Photos (Antenna spec._TB_HB_2)Test Setup Photos2026-05-20PDF 400.5 KB
Test Setup Photos_SARTest Setup Photos2026-05-20PDF 2.2 MB
Test Setup Photos_SARTest Setup Photos2026-05-20PDF 2.5 MB
Test Setup Photos_6VLTest Setup Photos2026-03-15PDF 1.3 MB
Test Setup Photos_SARTest Setup Photos2026-03-15PDF 1.1 MB
BL-SZ2550400-AS-1 SAR test setup photo-FCCTest Setup Photos2026-01-14PDF 744.8 KB
BL-SZ2550400-AS-3 SAR test setup photo-FCCTest Setup Photos2026-01-14PDF 716.6 KB
RF Exposure Test Setup PhotosTest Setup Photos2025-05-06PDF 91.4 KB
RF Exposure Test Setup PhotosTest Setup Photos2025-05-06PDF 499.2 KB
Test Set Up Photos_2.4G,5G,5.9G,BTTest Setup Photos2025-03-05PDF 2.2 MB
Test Set Up Photos_SARTest Setup Photos2025-03-05PDF 1.2 MB
Test Setup Photos_SARTest Setup Photos2025-03-05PDF 1.2 MB
Antenna Test Report_INNOWAVETest Report2026-09-29PDF 599.7 KB
Antenna Test Report_LuxshareTest Report2026-09-29PDF 548.9 KB
Antenna Test Report (AWAN)Test Report2026-05-15PDF 2 MB
Antenna Test Report (HB) revTest Report2026-05-15PDF 1.9 MB
Antenna Test Report (NB_AWAN)Test Report2026-05-15PDF 1.7 MB
Antenna Test Report (NB_HB)Test Report2026-05-15PDF 1.5 MB
Antenna Test Report (TB_AWAN)Test Report2026-05-15PDF 1.6 MB
Antenna Test Report (TB_HB)Test Report2026-05-15PDF 1.5 MB
Antenna Datasheet_1Test Report2026-01-29PDF 863.3 KB
Antenna Datasheet_2Test Report2026-01-29PDF 773.4 KB
Antenna Datasheet_3Test Report2026-01-29PDF 995.6 KB
Antenna Datasheet_4Test Report2026-01-29PDF 1,021.2 KB
Antenna Datasheet_5Test Report2026-01-29PDF 1.4 MB
Antenna Datasheet_6Test Report2026-01-29PDF 1.4 MB
Test Report_6VL_1Test Report2026-01-29PDF 5.3 MB
Test Report_6VL_2Test Report2026-01-29PDF 5.4 MB
Test Report_6VL_3Test Report2026-01-29PDF 3.5 MB
Ant spec_HUBBLETest Report2025-07-21PDF 1.6 MB
Ant spec_INNOWAVETest Report2025-07-21PDF 3.8 MB
BL-SZ2550400-703 FCC SAR test report_MT7922A12LRF Exposure Info2025-07-21PDF 2.8 MB
BL-SZ2550400-705 FCC PD SAR test report_MT7922A12LRF Exposure Info2025-07-21PDF 1.1 MB
Antenna Datasheet_260-25105Test Report2025-03-05PDF 1.5 MB
Antenna Datasheet_260-25106Test Report2025-03-05PDF 845.1 KB
Test Report_DFSTest Report2025-03-05PDF 795.3 KB
Test Report_DSSTest Report2025-03-05PDF 1,013.1 KB
Test Report_DTS-BT LETest Report2025-03-05PDF 1 MB
Test Report_DTS-WLANTest Report2025-03-05PDF 1.5 MB
Test Report_NIITest Report2025-03-05PDF 2 MB
Test Report_NII-UNII4Test Report2025-03-05PDF 1.1 MB
Attestation_Statements of part 2.911_d__5__Attestation Statements2026-09-29PDF 63.5 KB
US agentAttestation Statements2026-09-29PDF 295.8 KB
Covered Equipment Certification Attestation LetterAttestation Statements2026-05-15PDF 95.3 KB
US Agent AttestationAttestation Statements2026-05-15PDF 295.8 KB
6VL device DeclarationAttestation Statements2026-01-29PDF 248.3 KB
Attestation _Statements of part 2.911_d__5__Attestation Statements2026-01-29PDF 77.1 KB
Attestation StatementsAttestation Statements2025-07-21PDF 67 KB
U.S. Agent LetterAttestation Statements2025-07-21PDF 386.3 KB
Agent AuthorizationCover Letter(s)2026-09-29PDF 63.4 KB
Confidentiality Request Metadata onlyCover Letter(s)2026-09-29PDF 80.1 KB
Confidentiality Request revised 0929Cover Letter(s)2026-09-29PDF 102 KB
Contact AuthorizationCover Letter(s)2026-09-29PDF 357.9 KB
Description of ChangeCover Letter(s)2026-09-29PDF 146.7 KB
C2PC_Description of Change LetterCover Letter(s)2026-05-15PDF 156.9 KB
C2PC_Description of Change LetterCover Letter(s)2026-05-15PDF 202.8 KB
Confidentiality Request Letter(short term)Cover Letter(s)2026-05-15PDF 72.7 KB
POACover Letter(s)2026-05-15PDF 169.7 KB
POA_ContactCover Letter(s)2026-05-15PDF 357.9 KB
Agent AuthorizationCover Letter(s)2026-01-29PDF 153.3 KB
Confidentiality Request_Long termCover Letter(s)2026-01-29PDF 78.4 KB
Confidentiality Request_Short termCover Letter(s)2026-01-29PDF 66.4 KB
Class II Permissive Change Metadata onlyCover Letter(s)2025-07-21PDF 113.9 KB
Class II Permissive Change_revCover Letter(s)2025-07-21PDF 134.3 KB
Confidentiality Request LetterCover Letter(s)2025-07-21PDF 201.2 KB
POACover Letter(s)2025-07-21PDF 162.3 KB
RF Exposure Info_SARRF Exposure Info2026-09-29PDF 1.6 MB
RF Exposure Info_SAR_Appendix A-KRF Exposure Info2026-09-29PDF 2.8 MB
RF Exposure Info_SAR_Appendix ZRF Exposure Info2026-09-29PDF 5.4 MB
RF Exposure Information_1RF Exposure Info2026-05-15PDF 1.7 MB
RF Exposure Information_1RF Exposure Info2026-05-15PDF 1.6 MB
RF Exposure Information_2RF Exposure Info2026-05-15PDF 4.3 MB
RF Exposure Information_2RF Exposure Info2026-05-15PDF 3 MB
RF Exposure Information_3RF Exposure Info2026-05-15PDF 5.4 MB
RF Exposure Information_3RF Exposure Info2026-05-15PDF 4.9 MB
RF Exposure Info_MPERF Exposure Info2026-01-29PDF 260.3 KB
RF Exposure Info_SARRF Exposure Info2026-01-29PDF 1.6 MB
RF Exposure Info_SAR_Appendix A-ZRF Exposure Info2026-01-29PDF 2.8 MB
BL-SZ2550400-AC-1 Calibration report-FCCRF Exposure Info2025-07-21PDF 4.2 MB
BL-SZ2550400-AC-2 Calibration report-FCCRF Exposure Info2025-07-21PDF 3.3 MB
BL-SZ2550400-AP-1 Power ListRF Exposure Info2025-07-21PDF 582.5 KB
BL-SZ2550400-AP-3 Power ListRF Exposure Info2025-07-21PDF 148.8 KB
BL-SZ2550400-ASC-1 System CheckRF Exposure Info2025-07-21PDF 221.3 KB
BL-SZ2550400-ATD-1 Test Log-FCCRF Exposure Info2025-07-21PDF 888.1 KB
BL-SZ2550400-ATD-3 Test Log-FCCRF Exposure Info2025-07-21PDF 180 KB
RF Exposure Info_SARRF Exposure Info2025-03-05PDF 1.6 MB
RF Exposure Info_SAR__Appendix A-KRF Exposure Info2025-03-05PDF 1.2 MB
RF Exposure Info_SAR__Appendix ZRF Exposure Info2025-03-05PDF 4.5 MB

Application Information

Application IDDkvZ8UrE4x3/1Hbs3VHgDQ==
Final Action Date2026-09-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022229074
ModelMT7922A12L
Frequency Range5865-5885 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Responsible PartySiegfried Chang, siegfried.chang@mediatek.com , 886-3-567-0766
Technical ContactKent Liu, Bureau Veritas Consumer Products Services (H.K.) L, ken.liu@bureauveritas.com , 886-3-2600609
Non-Technical ContactClifford Hsu, MediaTek USA Inc., Clifford.hsu@mediatek.com , 408-621-1159
Test FirmKen Liu, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, ken.liu@bureauveritas.com , +886-3-260-0609
TCB Emaildl_radio-certification@kiwa.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
DkvZ8UrE4x3/1Hbs3VHgDQ==2026-09-29Class II permissive change or modification of presently authorized equipment
8Om99rJT8degZNORPep8eQ==2026-09-29Class II permissive change or modification of presently authorized equipment
2FKgGh0L9CQfPPv4ty9YUQ==2026-09-29Class II permissive change or modification of presently authorized equipment
0sBz/8vpncTVU8b86RGN5Q==2026-09-29Class II permissive change or modification of presently authorized equipment
kzpzimLca55majpNLryGNw==2026-05-15Class II permissive change or modification of presently authorized equipment
kXPIhvZvt8CjV3CC02EWxw==2026-05-15Class II permissive change or modification of presently authorized equipment
XrB2jCClPsHrXTFWzuXnKw==2026-05-15Class II permissive change or modification of presently authorized equipment
W/LmquG98wY6jp6mRHO6cg==2026-05-15Class II permissive change or modification of presently authorized equipment
T5ThMzFOnvrGNM0rs3tfTA==2026-05-15Class II permissive change or modification of presently authorized equipment
Qmq30XT9mtVb/T+sxLHb+w==2026-05-15Class II permissive change or modification of presently authorized equipment
E8Ty9n9q8xvolMTQmPt8fg==2026-05-15Class II permissive change or modification of presently authorized equipment
BfXerkJj0aKIPWfzfRHagQ==2026-05-15Class II permissive change or modification of presently authorized equipment
D+eAsovXHuEAZoXjOmT/Ng==2026-01-29Original Equipment
y6f91IjWwb6Jr77M1mwtxQ==2025-07-21Class II permissive change or modification of presently authorized equipment
ts7dudSp8bIAq9Y34Db00w==2025-07-21Class II permissive change or modification of presently authorized equipment
X1Q5Yi1IXpG9lqPInckitg==2025-07-21Class II permissive change or modification of presently authorized equipment
BdH5BbKIjZWSisqBmyFbOA==2025-07-21Class II permissive change or modification of presently authorized equipment
qfVnNTGDkwzlDljmkfXk9A==2025-03-05Class II permissive change or modification of presently authorized equipment
mVqw2bviEN3ptvmCJkEZpg==2025-03-05Class II permissive change or modification of presently authorized equipment
hDsmonmAESfKMiBITbiSRQ==2025-03-05Class II permissive change or modification of presently authorized equipment
fllU/Kqc4h4shkmgZAO8nw==2025-03-05Class II permissive change or modification of presently authorized equipment
lft9dMvFXuBeFeOVWeu1HA==2024-11-07Class II permissive change or modification of presently authorized equipment
eZT9bMJw2HOux01UChJluA==2024-11-07Class II permissive change or modification of presently authorized equipment
N9FtGG4bM+wmZ0JoE/bZ0A==2024-11-07Class II permissive change or modification of presently authorized equipment
87lJzcpw/q7EqbQaNwCaLQ==2024-11-07Class II permissive change or modification of presently authorized equipment
yeKTMuAPN52ZvqDKqNJPMg==2024-10-22Class II permissive change or modification of presently authorized equipment
oGedE6q9yR2ATGC04XFc5w==2024-10-22Class II permissive change or modification of presently authorized equipment
d5e0+yGU7zJeddpI6DcRHg==2024-10-22Class II permissive change or modification of presently authorized equipment
S3S97dTj3LaiZBbOD+bsmw==2024-10-22Class II permissive change or modification of presently authorized equipment
1tOXYvwZ9JQgrxjBI0IVIQ==2024-10-22Class II permissive change or modification of presently authorized equipment
tcPTJWdCswFzSrrUhuQ8kg==2024-06-13Class II permissive change or modification of presently authorized equipment
onsH2iMQn8kYiZkNdzoyNw==2024-06-13Class II permissive change or modification of presently authorized equipment
oZ/CYxxi4Q8pieMu5GGJPA==2024-06-13Class II permissive change or modification of presently authorized equipment
hJjCEB9WjllIi/NVCP8K4w==2024-06-13Class II permissive change or modification of presently authorized equipment
8sa5XKUBEhoFbHvbN8g2gQ==2024-06-13Class II permissive change or modification of presently authorized equipment
yRWQSS+KmewdRFKXCcGG/Q==2024-05-23Class II permissive change or modification of presently authorized equipment
jyrtLSPZV33EuXH+cZDd6w==2024-05-23Class II permissive change or modification of presently authorized equipment
Ue5dvt3PO+8kekVFKWdxPg==2024-05-23Class II permissive change or modification of presently authorized equipment
JAuASaufklGiwGgJsS9qzA==2024-05-23Class II permissive change or modification of presently authorized equipment
vV7QIQTyshAlvZc+BWYofg==2024-05-02Class II permissive change or modification of presently authorized equipment
nRB/hXQJkQtZy57/KDgV6A==2024-05-02Class II permissive change or modification of presently authorized equipment
+p87dVhKHN8ILNCuTsR+GQ==2024-05-02Class II permissive change or modification of presently authorized equipment
+DJtvGQ0ItRj7vflOPpiOg==2024-05-02Class II permissive change or modification of presently authorized equipment
whrwo6RlZBpJm8YA6JN2ow==2024-04-09Class II permissive change or modification of presently authorized equipment
WrakUtCFvaMq1HhSBswSdQ==2024-04-09Class II permissive change or modification of presently authorized equipment
PVQMYTKdE928UFoZeMs3NA==2024-04-09Class II permissive change or modification of presently authorized equipment
24q5IoGmZunwjdPrMSy+gA==2024-04-09Class II permissive change or modification of presently authorized equipment
jj/s3x+z8Ut1+JY9Ah6ONA==2024-02-15Class II permissive change or modification of presently authorized equipment
FxD9KWn+KfiuXBN737mZ8Q==2024-02-15Class II permissive change or modification of presently authorized equipment
91iGM7hWDxaLMKp7c4N9OQ==2024-02-15Class II permissive change or modification of presently authorized equipment
4bexNmskWUR/JbYg/4juDw==2024-02-15Class II permissive change or modification of presently authorized equipment
itkIg3zhztKahe5xyW++1Q==2024-02-07Class II permissive change or modification of presently authorized equipment
VGx7iY8HAbCv6KSvj151KQ==2024-02-07Class II permissive change or modification of presently authorized equipment
Fg1OyYdK8v11Q+ChjuvPKA==2024-02-07Class II permissive change or modification of presently authorized equipment
0wdECFA64QtbsR+b+bSXrw==2024-02-07Class II permissive change or modification of presently authorized equipment
njb7RlI/YNpgJpu/2+dVkw==2024-01-31Class II permissive change or modification of presently authorized equipment
RPCfh9N2SE+peaEEtM5glA==2024-01-31Class II permissive change or modification of presently authorized equipment
Om+3YVzo0u45at7+NV5A5A==2024-01-31Class II permissive change or modification of presently authorized equipment
HfwTKiB9kvIYN77zUzc7mw==2024-01-31Class II permissive change or modification of presently authorized equipment
sIG4xqq2pnvcsYrqPdmTnA==2023-10-29Original Equipment
k5WkrnGhkqaYznBQNqQkQg==2023-09-21Class II permissive change or modification of presently authorized equipment
haLS1/l2fRMf9s9fwcUPiA==2023-09-21Class II permissive change or modification of presently authorized equipment
Run5kN7Bf5R0YRuiaRP/ag==2023-09-21Class II permissive change or modification of presently authorized equipment
FZ7teKC5gAyFvox0+OlnmQ==2023-09-21Class II permissive change or modification of presently authorized equipment
uSee8bW6tm8y8ILKLmIYuQ==2023-06-19Class II permissive change or modification of presently authorized equipment
hsvL7FsaJy6kc/41fvxqzA==2023-06-19Class II permissive change or modification of presently authorized equipment
cdBbwPUxprYe1vikwHGj0w==2023-06-19Class II permissive change or modification of presently authorized equipment
Xtp8LGuM4BUUfCSdtdgv7A==2023-06-19Class II permissive change or modification of presently authorized equipment
wkZiz2FmUjvaLVBuB3uGyA==2023-05-03Class II permissive change or modification of presently authorized equipment
L8OSdNkt/Im3dRjSed06Xw==2023-05-03Class II permissive change or modification of presently authorized equipment
424frGraxTBcXN5FJYLpPg==2023-05-03Class II permissive change or modification of presently authorized equipment
+mJrUbiteaAPsjwNMtjPow==2023-05-03Class II permissive change or modification of presently authorized equipment
nPNryzMrptzAyMCE0Bzprg==2023-02-22Class II permissive change or modification of presently authorized equipment
jr/Z8pHlap4w8LjPAuxwVA==2023-02-22Class II permissive change or modification of presently authorized equipment
gAKKWSXzCKG53CkYRBfA7w==2023-02-22Class II permissive change or modification of presently authorized equipment
A3sGGEhC5SbmUxES4OKomA==2023-02-22Class II permissive change or modification of presently authorized equipment
sXd6vO3Ej8WolYDm0BV0Wg==2022-08-04Class II permissive change or modification of presently authorized equipment
wzxqvrFV5Z6VwvFMPR0LWA==2022-05-09Class II permissive change or modification of presently authorized equipment
szdKUbv+WSSlT/n57B7vRg==2022-05-09Class II permissive change or modification of presently authorized equipment
27WKn03EAdhcOYqlRoMEJg==2022-05-09Class II permissive change or modification of presently authorized equipment
w79mpDVwmJANCbSC4D2YPw==2022-04-18Class II permissive change or modification of presently authorized equipment
u+k+B3zCVXcvVKRDTpGgfA==2022-04-18Class II permissive change or modification of presently authorized equipment
q9OPJ0ZPXAWfdVMCeHXWBg==2022-04-18Class II permissive change or modification of presently authorized equipment
OMrKdgenCHdpzNw4VKUWGA==2022-04-18Class II permissive change or modification of presently authorized equipment
vxb+lZdYIlOUtDSkdZgXyA==2022-03-09Class II permissive change or modification of presently authorized equipment
g0FehCrjS5lPObBrhzzvZw==2022-03-09Class II permissive change or modification of presently authorized equipment
dpq+cm7cCbt9hzn9EzSTMQ==2022-03-09Class II permissive change or modification of presently authorized equipment
IVilkQ4XIo4DKVfBRXxByg==2022-03-09Class II permissive change or modification of presently authorized equipment
Y2Xf7djxdszS0y4TkmUn6A==2022-02-28Class II permissive change or modification of presently authorized equipment
T7+bY0SNNMQhLo5UUQKd0Q==2022-02-28Class II permissive change or modification of presently authorized equipment
6O2YsKc+vlIhrj5YuYNsiQ==2022-02-28Class II permissive change or modification of presently authorized equipment
07WqRotiKBgWdy33NUcUlA==2022-02-28Class II permissive change or modification of presently authorized equipment
mGYJSdS1wygah9mKt/4M8g==2022-02-14Class II permissive change or modification of presently authorized equipment
ahdST5c4TDRz5dOt/cyOBg==2022-02-14Class II permissive change or modification of presently authorized equipment
Xp6C6Wvnic5OY62ycG0R9Q==2022-02-14Class II permissive change or modification of presently authorized equipment
MSdVNiXpWeOibHGxcTeQuw==2022-02-14Class II permissive change or modification of presently authorized equipment
ojD6Nn8PjaT5NdgghqKWzQ==2022-02-07Class II permissive change or modification of presently authorized equipment
TD4KVCf92G+9Z3kOLepwLA==2022-02-07Class II permissive change or modification of presently authorized equipment
jC+5udfRUDexxMh5G9i1hA==2021-11-11Class II permissive change or modification of presently authorized equipment
ibMPrJAsjUAuSAwNUwbypg==2021-11-11Class II permissive change or modification of presently authorized equipment
Jnn70rcX0nmPbOkHwQyZ9g==2021-11-11Class II permissive change or modification of presently authorized equipment
CjKOPrUHY0lJz7BoRknotg==2021-11-11Class II permissive change or modification of presently authorized equipment
sysY5K6AGJ6a+4t+zalmZg==2021-10-05Original Equipment
qdDymRIrdTki/bPb6qXQww==2021-10-05Original Equipment
VtlwfbHMvbbdw5iNSFLAAw==2021-10-05Original Equipment
IMopH5GP0AoM6oJ7v8BUyQ==2021-10-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0215CCC
2402-2480 MHz0.022000015CCC
2402-2480 MHz0.02215CCC
2402-2480 MHz0.02CC
2402-2480 MHz0.0220000CC
2412-2472 MHz0.7715CCC, MO

Grants

TCB Grant - Application yRWQSS+KmewdRFKXCcGG/Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/23/2024

Application Dated: 05/06/2024
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS along with enabling TAS (Time-Average SAR) feature through firmware, when device request approval for portable category specific host, Notebook PC, model number: UM3406H, RM3406H, BM3406H, UM3406HA.; Brand: ASUS, with antenna INPAQ, model no.: MDA-LE-01-010.

SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.31 W/kg and 1.49 W/kg at 1g tissues, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yRWQSS+KmewdRFKXCcGG/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 05/23/2024

Application Dated: 05/06/2024
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted.

This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS along with enabling TAS (Time-Average SAR) feature through firmware, when device request approval for portable category specific host, Notebook PC, model number: UM3406H, RM3406H, BM3406H, UM3406HA.; Brand: ASUS, with antenna INPAQ, model no.: MDA-LE-01-010.

SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.31 W/kg and 1.49 W/kg at 1g tissues, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application yeKTMuAPN52ZvqDKqNJPMg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle #1
Littleton, MA 01460
Date of Grant: 10/22/2024

Application Dated: 08/20/2024
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

C2PC for adding TAS function through software enabling to the portable category specific host, Brand: ASUS, Model number: RC72LA.

C2PC: Adding a portable host (Model: RC72LA). Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 0mm. The highest reported SAR for body, extremity and simultaneous exposure conditions are 0.89W/kg, 0.14 W/kg (10g) and 1.28 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11ax (160HE) SISO mode by software. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.73 W/kg and 1.09 W/kg, respectively C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. C2PC: Updating Tx power value for SAR testing. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.51 W/kg and 0.87 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of ate least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2x2 MIMO configuration, enabled for 6GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application yeKTMuAPN52ZvqDKqNJPMg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 10/22/2024

Application Dated: 08/20/2024
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

C2PC for adding TAS function through software enabling to the portable category specific host, Brand: ASUS, Model number: RC72LA.

C2PC: Adding a portable host (Model: RC72LA). Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 0mm. The highest reported SAR for body, extremity and simultaneous exposure conditions are 0.89W/kg, 0.14 W/kg (10g) and 1.28 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11ax (160HE) SISO mode by software. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.73 W/kg and 1.09 W/kg, respectively C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. C2PC: Updating Tx power value for SAR testing. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.51 W/kg and 0.87 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of ate least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2x2 MIMO configuration, enabled for 6GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application y6f91IjWwb6Jr77M1mwtxQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/21/2025

Application Dated: 07/21/2025
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.056  
CC EP MO 15E 5955.0  -  6415.0 0.993  
CC EP MO 15E 6535.0  -  6855.0 0.974  

Class II Permissive Change. This change is : (a) Integrating approved module in a specific host (portable category configuration: Handheld Console PC, Brand Name: Lenovo, Model Name: Legion Go 8AHP2, Legion Go 8ASP2.) (b) The host antenna has the same type as originally approved with lower gains in the intentional transmit frequency bands, RF output power has been reduced from the original filing. (c) Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported SAR values for body, limbs and simultaneous transmission use conditions are 1.14 W/kg, 0.31 W/kg and 1.29 W/kg, respectively.

This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths.

Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.73 W/kg and 1.09 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Y2Xf7djxdszS0y4TkmUn6A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/28/2022

Application Dated: 02/15/2022
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: TP00140A. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.57 W/kg, respectively.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Y2Xf7djxdszS0y4TkmUn6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 02/28/2022

Application Dated: 02/15/2022
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: TP00140A. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.57 W/kg, respectively.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Xtp8LGuM4BUUfCSdtdgv7A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/19/2023

Application Dated: 05/15/2023
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

C2PC: Enabling WIFI 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 and UNII-4 span channels. C2PC: Updating TX power value for SAR testing. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.51 W/kg and 0.87 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: RC71L, RC71X.; Brand: ASUS, with antenna ASAP, model no.: LA9RF460-CS-H and LA9RF461-CS-H and AWAN, model no.: AYP6Y-100377 and AYP6Y-100378. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.75 W/kg and 1.43 W/kg at 1g tissues, respectively.The highest reported power density is 9.98 W/cm2

C2PC for adding TAS function through software enabling to the portable category specific host, Brand: ASUS, Model number RC71L, RC71X.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Xtp8LGuM4BUUfCSdtdgv7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 06/19/2023

Application Dated: 05/15/2023
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

C2PC: Enabling WIFI 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 and UNII-4 span channels. C2PC: Updating TX power value for SAR testing. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.51 W/kg and 0.87 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: RC71L, RC71X.; Brand: ASUS, with antenna ASAP, model no.: LA9RF460-CS-H and LA9RF461-CS-H and AWAN, model no.: AYP6Y-100377 and AYP6Y-100378. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.75 W/kg and 1.43 W/kg at 1g tissues, respectively.The highest reported power density is 9.98 W/cm2

C2PC for adding TAS function through software enabling to the portable category specific host, Brand: ASUS, Model number RC71L, RC71X.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application XrB2jCClPsHrXTFWzuXnKw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 05/15/2026

Application Dated: 05/11/2026
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

C2PC: Adding new monopole antennas (Model: 260-25105 & 260-25106) which can be used with the module. SAR has been evaluated at 5 mm. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.12 W/kg and 1.58 W/kg, respectively. C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.36 W/kg and 1.15 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P29T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 1.18 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Xp6C6Wvnic5OY62ycG0R9Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/14/2022

Application Dated: 02/11/2022
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.19  
CC MO ND 15E 5260.0  -  5320.0 0.2  
CC MO ND 15E 5500.0  -  5720.0 0.24  
CC MO 15E 5745.0  -  5825.0 0.26  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40/80 MHz bandwidths.

Class II Permissive Change: This change incorporates the subject approved module into a Notebook Computer (Model: TP00141A). This device only supports 2x2 MIMO and operating bandwidths of 20 MHz, 40 MHz, 80 MHz and 160 MHz. The highest reported SAR values for body and simultaneous transmission, use conditions 0.24 W/kg and 0.41 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Xp6C6Wvnic5OY62ycG0R9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 02/14/2022

Application Dated: 02/11/2022
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.19  
CC MO ND 15E 5260.0  -  5320.0 0.2  
CC MO ND 15E 5500.0  -  5720.0 0.24  
CC MO 15E 5745.0  -  5825.0 0.26  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40/80 MHz bandwidths.

Class II Permissive Change: This change incorporates the subject approved module into a Notebook Computer (Model: TP00141A). This device only supports 2x2 MIMO and operating bandwidths of 20 MHz, 40 MHz, 80 MHz and 160 MHz. The highest reported SAR values for body and simultaneous transmission, use conditions 0.24 W/kg and 0.41 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application X1Q5Yi1IXpG9lqPInckitg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/21/2025

Application Dated: 07/21/2025
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Digital Transmission System
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.02  
CC MO 15C 2412.0  -  2472.0 0.77  

Class II Permissive Change. This change is : (a) Integrating approved module in a specific host (portable category configuration: Handheld Console PC, Brand Name: Lenovo, Model Name: Legion Go 8AHP2, Legion Go 8ASP2.) (b) The host antenna has the same type as originally approved with lower gains in the intentional transmit frequency bands, RF output power has been reduced from the original filing. (c) Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported SAR values for body, limbs and simultaneous transmission use conditions are 1.14 W/kg, 0.47 W/kg and 1.14 W/kg, respectively.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application wzxqvrFV5Z6VwvFMPR0LWA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/09/2022

Application Dated: 04/18/2022
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

C2PC: Enabling WiFi 6E 802.11a SISO mode by software.

C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels.

C2PC: Updating Tx power value for SAR testing. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.51 W/kg and 0.87 W/kg, respectively.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application wzxqvrFV5Z6VwvFMPR0LWA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 05/09/2022

Application Dated: 04/18/2022
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

C2PC: Enabling WiFi 6E 802.11a SISO mode by software.

C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels.

C2PC: Updating Tx power value for SAR testing. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.51 W/kg and 0.87 W/kg, respectively.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application WrakUtCFvaMq1HhSBswSdQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 04/09/2024

Application Dated: 03/04/2024
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change with enabling TAS feature through firmware respectively for portable category specific host ASUS notebook PC, models M5506N, D5506N, Y5506CN, M5606N, D5606N, Y5606CN, M5506U, D5506U, Y5506CU, M5606U, D5606U, and Y5606CU with the antenna Luxshare-ICT, part no. LA9RF560-CS-H, LA9RF561-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.59 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WrakUtCFvaMq1HhSBswSdQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 04/09/2024

Application Dated: 03/04/2024
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change with enabling TAS feature through firmware respectively for portable category specific host ASUS notebook PC, models M5506N, D5506N, Y5506CN, M5606N, D5606N, Y5606CN, M5506U, D5506U, Y5506CU, M5606U, D5606U, and Y5606CU with the antenna Luxshare-ICT, part no. LA9RF560-CS-H, LA9RF561-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 1.59 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application wkZiz2FmUjvaLVBuB3uGyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 05/03/2023

Application Dated: 04/27/2023
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+ BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: TP00145B. And will be permanently disabled the Wi-Fi 5GHz UNII-4 band operation by software. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.38 W/kg, respectively.

C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wkZiz2FmUjvaLVBuB3uGyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 05/03/2023

Application Dated: 04/27/2023
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+ BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: TP00145B. And will be permanently disabled the Wi-Fi 5GHz UNII-4 band operation by software. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.38 W/kg, respectively.

C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application whrwo6RlZBpJm8YA6JN2ow==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 04/09/2024

Application Dated: 03/04/2024
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Digital Transmission System
Notes: RAS-MT7922A12L
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  
CC MO 15C 2412.0  -  2472.0 0.77  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40 MHz bandwidths.

Class II Permissive Change with enabling TAS feature through firmware respectively for portable category specific host ASUS notebook PC, models M5506N, D5506N, Y5506CN, M5606N, D5606N, Y5606CN, M5506U, D5506U, Y5506CU, M5606U, D5606U, and Y5606CU with the antenna Luxshare-ICT, part no. LA9RF560-CS-H, LA9RF561-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 1.02 W/kg and 1.59 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application whrwo6RlZBpJm8YA6JN2ow==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 04/09/2024

Application Dated: 03/04/2024
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Digital Transmission System
Notes: RAS-MT7922A12L
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  
CC MO 15C 2412.0  -  2472.0 0.77  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40 MHz bandwidths.

Class II Permissive Change with enabling TAS feature through firmware respectively for portable category specific host ASUS notebook PC, models M5506N, D5506N, Y5506CN, M5606N, D5606N, Y5606CN, M5506U, D5506U, Y5506CU, M5606U, D5606U, and Y5606CU with the antenna Luxshare-ICT, part no. LA9RF560-CS-H, LA9RF561-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 1.02 W/kg and 1.59 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application w79mpDVwmJANCbSC4D2YPw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/18/2022

Application Dated: 03/22/2022
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.193  
CC MO ND 15E 5260.0  -  5320.0 0.198  
CC MO ND 15E 5500.0  -  5720.0 0.244  
CC MO 15E 5745.0  -  5825.0 0.256  
CC EP MO 15E 5865.0  -  5885.0 0.303  
CC EP MO 15E 5845.0  -  5845.0 0.183  
CC EP MO 15E 5835.0  -  5835.0 0.304  
CC EP MO 15E 5855.0  -  5855.0 0.491  
CC EP MO 15E 5815.0  -  5815.0 0.255  

C2PC: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 13s G4 ARB and ThinkBook 13s G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.20 W/kg and 1.29 W/kg, respectively.

C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.69 W/kg and 1.05 W/kg, respectively.

C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.15 W/kg, respectively.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application w79mpDVwmJANCbSC4D2YPw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 04/18/2022

Application Dated: 03/22/2022
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.193  
CC MO ND 15E 5260.0  -  5320.0 0.198  
CC MO ND 15E 5500.0  -  5720.0 0.244  
CC MO 15E 5745.0  -  5825.0 0.256  
CC EP MO 15E 5865.0  -  5885.0 0.303  
CC EP MO 15E 5845.0  -  5845.0 0.183  
CC EP MO 15E 5835.0  -  5835.0 0.304  
CC EP MO 15E 5855.0  -  5855.0 0.491  
CC EP MO 15E 5815.0  -  5815.0 0.255  

C2PC: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 13s G4 ARB and ThinkBook 13s G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.20 W/kg and 1.29 W/kg, respectively.

C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.69 W/kg and 1.05 W/kg, respectively.

C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.15 W/kg, respectively.

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application W/LmquG98wY6jp6mRHO6cg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 05/15/2026

Application Dated: 05/11/2026
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.193  
CC MO ND 15E 5250.0  -  5320.0 0.198  
CC MO ND 15E 5500.0  -  5720.0 0.244  
CC MO 15E 5745.0  -  5825.0 0.256  
CC EP MO 15E 5865.0  -  5885.0 0.303  
CC EP MO 15E 5845.0  -  5845.0 0.183  
CC EP MO 15E 5835.0  -  5835.0 0.304  
CC EP MO 15E 5855.0  -  5855.0 0.491  
CC EP MO 15E 5815.0  -  5815.0 0.255  

C2PC: Adding new monopole antennas (Model: 260-25105 & 260-25106) which can be used with the module. SAR has been evaluated at 5 mm. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.77 W/kg and 1.58 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively. C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.15 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.

Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P30T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.19 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application vxb+lZdYIlOUtDSkdZgXyA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/09/2022

Application Dated: 03/03/2022
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: TP00137A, TP00137B. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.48 W/kg and 1.48 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application vxb+lZdYIlOUtDSkdZgXyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 03/09/2022

Application Dated: 03/03/2022
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: TP00137A, TP00137B. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.48 W/kg and 1.48 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application vV7QIQTyshAlvZc+BWYofg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/02/2024

Application Dated: 03/19/2024
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Digital Transmission System
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.02  
CC MO 15C 2412.0  -  2472.0 0.77  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40 MHz bandwidths.

Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models M5406N, D5406N, Y5406CN, M5406U, D5406U and Y5406CU with the antenna Luxshare-ICT, part no. LA9RF558-CS-H, LA9RF559-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.57 W/kg respectively. WLAN TAS feature enabled.  


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application vV7QIQTyshAlvZc+BWYofg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 05/02/2024

Application Dated: 03/19/2024
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Digital Transmission System
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.02  
CC MO 15C 2412.0  -  2472.0 0.77  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40 MHz bandwidths.

Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models M5406N, D5406N, Y5406CN, M5406U, D5406U and Y5406CU with the antenna Luxshare-ICT, part no. LA9RF558-CS-H, LA9RF559-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.57 W/kg respectively. WLAN TAS feature enabled.  


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application VtlwfbHMvbbdw5iNSFLAAw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/05/2021

Application Dated: 09/15/2021
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VtlwfbHMvbbdw5iNSFLAAw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 10/05/2021

Application Dated: 09/15/2021
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5955.0  -  7115.0 0.019  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application VGx7iY8HAbCv6KSvj151KQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 02/07/2024

Application Dated: 02/07/2024
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.193  
CC MO ND 15E 5260.0  -  5320.0 0.198  
CC MO ND 15E 5500.0  -  5720.0 0.244  
CC MO 15E 5745.0  -  5825.0 0.256  
CC EP MO 15E 5865.0  -  5885.0 0.303  
CC EP MO 15E 5845.0  -  5845.0 0.183  
CC EP MO 15E 5835.0  -  5835.0 0.304  
CC EP MO 15E 5855.0  -  5855.0 0.491  
CC EP MO 15E 5815.0  -  5815.0 0.255  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.

Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models M5406N, D5406N, Y5406CN, M5406U, D5406U and Y5406CU with the antenna Luxshare-ICT, part no. LA9RF558-CS-H, LA9RF559-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.57 W/kg respectively. 


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application VGx7iY8HAbCv6KSvj151KQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 02/07/2024

Application Dated: 02/07/2024
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.193  
CC MO ND 15E 5260.0  -  5320.0 0.198  
CC MO ND 15E 5500.0  -  5720.0 0.244  
CC MO 15E 5745.0  -  5825.0 0.256  
CC EP MO 15E 5865.0  -  5885.0 0.303  
CC EP MO 15E 5845.0  -  5845.0 0.183  
CC EP MO 15E 5835.0  -  5835.0 0.304  
CC EP MO 15E 5855.0  -  5855.0 0.491  
CC EP MO 15E 5815.0  -  5815.0 0.255  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Device is a 2 x 2 MIMO configuration, operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.

Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models M5406N, D5406N, Y5406CN, M5406U, D5406U and Y5406CU with the antenna Luxshare-ICT, part no. LA9RF558-CS-H, LA9RF559-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.

The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.57 W/kg respectively. 


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application uSee8bW6tm8y8ILKLmIYuQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/19/2023

Application Dated: 05/15/2023
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: RC71L, RC71X.; Brand: ASUS, with antenna ASAP, model no.: LA9RF460-CS-H and LA9RF461-CS-H and AWAN, model no.: AYP6Y-100377 and AYP6Y-100378. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.24 W/kg and 1.43 W/kg at 1g tissues, respectively.

C2PC for adding TAS function through software enabling to the portable category specific host, Brand: ASUS, model number RC71L, RC71X.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uSee8bW6tm8y8ILKLmIYuQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 06/19/2023

Application Dated: 05/15/2023
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.022  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: RC71L, RC71X.; Brand: ASUS, with antenna ASAP, model no.: LA9RF460-CS-H and LA9RF461-CS-H and AWAN, model no.: AYP6Y-100377 and AYP6Y-100378. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.24 W/kg and 1.43 W/kg at 1g tissues, respectively.

C2PC for adding TAS function through software enabling to the portable category specific host, Brand: ASUS, model number RC71L, RC71X.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Ue5dvt3PO+8kekVFKWdxPg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 05/23/2024

Application Dated: 05/06/2024
MediaTek Inc.
No. 1, Dusing 1st Rd.
Hsinchu Science Park
Hsinchu City, 30078
Taiwan
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.193  
CC MO ND 15E 5260.0  -  5320.0 0.198  
CC MO ND 15E 5500.0  -  5720.0 0.244  
CC MO 15E 5745.0  -  5825.0 0.256  
CC EP MO 15E 5865.0  -  5885.0 0.303  
CC EP MO 15E 5845.0  -  5845.0 0.183  
CC EP MO 15E 5835.0  -  5835.0 0.304  
CC EP MO 15E 5855.0  -  5855.0 0.491  
CC EP MO 15E 5815.0  -  5815.0 0.255  

C2PC: Enabling WiFi 6E 802.11a SISO mode by software (approved on05/09/2022).

C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.69 W/kg and 1.05 W/kg, respectively (approved on 02/07/2022).

C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.15 W/kg, respectively (approved on 11/11/2021).

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2 x 2 MIMO configuration operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS along with enabling TAS (Time-Average SAR) feature through firmware, when device request approval for portable category specific host, Notebook PC, model number: UM3406H, RM3406H, BM3406H, UM3406HA.; Brand: ASUS, with antenna INPAQ, model no.: MDA-LE-02-023 and MDA-LE-01-010. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.18 W/kg and 1.49 W/kg at 1g tissues, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Ue5dvt3PO+8kekVFKWdxPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MediaTek Inc.
No. 1, Dusing 1st Rd. Hsinchu Science Park
Hsinchu City, 30078
Taiwan
  Date of Grant: 05/23/2024

Application Dated: 05/06/2024
 
Attention: Siegfried Chang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAS-MT7922A12L
Name of Grantee:  MediaTek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.193  
CC MO ND 15E 5260.0  -  5320.0 0.198  
CC MO ND 15E 5500.0  -  5720.0 0.244  
CC MO 15E 5745.0  -  5825.0 0.256  
CC EP MO 15E 5865.0  -  5885.0 0.303  
CC EP MO 15E 5845.0  -  5845.0 0.183  
CC EP MO 15E 5835.0  -  5835.0 0.304  
CC EP MO 15E 5855.0  -  5855.0 0.491  
CC EP MO 15E 5815.0  -  5815.0 0.255  

C2PC: Enabling WiFi 6E 802.11a SISO mode by software (approved on05/09/2022).

C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.69 W/kg and 1.05 W/kg, respectively (approved on 02/07/2022).

C2PC: Updating Tx power value for SAR testing. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.15 W/kg, respectively (approved on 11/11/2021).

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Device is a 2 x 2 MIMO configuration operation is intended for indoor use only. This device has 20/40/80/160 MHz bandwidths.

Class II Permissive Change for Reduce the WLAN Output Power through BIOS along with enabling TAS (Time-Average SAR) feature through firmware, when device request approval for portable category specific host, Notebook PC, model number: UM3406H, RM3406H, BM3406H, UM3406HA.; Brand: ASUS, with antenna INPAQ, model no.: MDA-LE-02-023 and MDA-LE-01-010. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.18 W/kg and 1.49 W/kg at 1g tissues, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: