FCC ID RAXWN8122A65

IEEE Dual Band 802.11n USB Module

by Arcadyan Technology Corporation

Grantee Code: RAX   Product Code: WN8122A65
Latest application date: 2011-07-05

FCC ID Device Details

FCC IDRAXWN8122A65
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRAX
Product CodeWN8122A65
Applicant BusinessArcadyan Technology Corporation 🇹🇼
Related Domains arcadyan.com
Equipment ClassIEEE Dual Band 802.11n USB Module
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2011-07-05
5180-5240 MHzOriginal Equipment2011-07-05

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2011-07-05PDF 238.9 KB
Internal PhotosInternal Photos2011-07-05PDF 504.6 KB
External PhotosExternal Photos2011-07-05PDF 165.8 KB
Label LocationID Label/Location Info2011-07-05PDF 114.9 KB
Test Setup PhotosTest Setup Photos2011-07-05PDF 483 KB
DSF ReportTest Report2011-07-05PDF 697.6 KB
Test ReportTest Report2011-07-05PDF 1.7 MB
Test ReportTest Report2011-07-05PDF 995.5 KB
Ad Hoc letterCover Letter(s)2011-07-05PDF 54.4 KB
Ad hoc letterCover Letter(s)2011-07-05PDF 54.9 KB
DOC letterCover Letter(s)2011-07-05PDF 53.2 KB
LTC RequestCover Letter(s)2011-07-05PDF 54.9 KB
Modular ApprovalCover Letter(s)2011-07-05PDF 29 KB
Modular Approval LetterCover Letter(s)2011-07-05PDF 29 KB
PoACover Letter(s)2011-07-05PDF 54.1 KB
MPERF Exposure Info2011-07-05PDF 90.4 KB

Application Information

Application IDaNp6qPrcsPZdJzDCjdnCCg==
Final Action Date2011-07-05
Application PurposeOriginal Equipment
Applicant FRN0009258708
ModelWN8122A65
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIEEE Dual Band 802.11n USB Module
Responsible PartySimon Liu, Manager, simon_liu@arcadyan.com , 886-3-572-7000
AgentLeo Leo Leo, Sporton Int. Inc., leohuang@sporton.com.tw , 886-3-656-9065
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailDollitz.uwe@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.

Applications

Application IDDatePurpose
aNp6qPrcsPZdJzDCjdnCCg==2011-07-05Original Equipment
LdVuzVveFlHItkTt4u4w7A==2011-07-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.49415CCC, MO
2422-2452 MHz0.38415CCC, MO
5180-5240 MHz0.04815ECC, MO
5190-5230 MHz0.0415ECC, MO
5260-5320 MHz0.06515ECC, MO
5270-5310 MHz0.03815ECC, MO
5500-5700 MHz0.06315ECC, MO
5510-5670 MHz0.04115ECC, MO
5745-5825 MHz0.37215CCC, MO
5755-5795 MHz0.29915CCC, MO

Grants

TCB Grant - Application LdVuzVveFlHItkTt4u4w7A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 07/05/2011

Application Dated: 07/05/2011
Arcadyan Technology Corporation
No.8, Sec.2, Guangfu Rd.,
Hsinchu, 30071
Taiwan
 
Attention: Simon Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAXWN8122A65
Name of Grantee:  Arcadyan Technology Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE Dual Band 802.11n USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.04  
CC MO 15E 5260.0  -  5320.0 0.065  
CC MO 15E 5270.0  -  5310.0 0.038  
CC MO 15E 5500.0  -  5700.0 0.063  
CC MO 15E 5510.0  -  5670.0 0.041  

Power listed is the maximum combined conducted peak output power as indicated in the filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz, 5270 to 5310 MHz, 5510 to 5670 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application LdVuzVveFlHItkTt4u4w7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Arcadyan Technology Corporation
No.8, Sec.2, Guangfu Rd.,
Hsinchu, 30071
Taiwan
  Date of Grant: 07/05/2011

Application Dated: 07/05/2011
 
Attention: Simon Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAXWN8122A65
Name of Grantee:  Arcadyan Technology Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE Dual Band 802.11n USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.04  
CC MO 15E 5260.0  -  5320.0 0.065  
CC MO 15E 5270.0  -  5310.0 0.038  
CC MO 15E 5500.0  -  5700.0 0.063  
CC MO 15E 5510.0  -  5670.0 0.041  

Power listed is the maximum combined conducted peak output power as indicated in the filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz, 5270 to 5310 MHz, 5510 to 5670 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application aNp6qPrcsPZdJzDCjdnCCg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 07/05/2011

Application Dated: 07/05/2011
Arcadyan Technology Corporation
No.8, Sec.2, Guangfu Rd.,
Hsinchu, 30071
Taiwan
 
Attention: Simon Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAXWN8122A65
Name of Grantee:  Arcadyan Technology Corporation
Equipment Class: Digital Transmission System
Notes: IEEE Dual Band 802.11n USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.494  
CC MO 15C 2422.0  -  2452.0 0.384  
CC MO 15C 5745.0  -  5825.0 0.372  
CC MO 15C 5755.0  -  5795.0 0.299  

Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application aNp6qPrcsPZdJzDCjdnCCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Arcadyan Technology Corporation
No.8, Sec.2, Guangfu Rd.,
Hsinchu, 30071
Taiwan
  Date of Grant: 07/05/2011

Application Dated: 07/05/2011
 
Attention: Simon Liu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RAXWN8122A65
Name of Grantee:  Arcadyan Technology Corporation
Equipment Class: Digital Transmission System
Notes: IEEE Dual Band 802.11n USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.494  
CC MO 15C 2422.0  -  2452.0 0.384  
CC MO 15C 5745.0  -  5825.0 0.372  
CC MO 15C 5755.0  -  5795.0 0.299  

Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: