FCC ID RAYVHFRS40
B&G; V60, SIMRAD RS40
by Navico Inc.
Grantee Code: RAY Product Code: VHFRS40
Latest application date: 2018-11-13
FCC ID Device Details
| FCC ID | RAYVHFRS40 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RAY |
| Product Code | VHFRS40 |
| Applicant Business | Navico Inc. 🇺🇸 |
| Related Domains |  navico.com  sgs.com |
| Equipment Class | B&G; V60, SIMRAD RS40 |
| Test Firm | SGS-CSTC Standards Technical Services Co., Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2018-11-13 |
| 156.025-157.425 MHz | Original Equipment | 2018-11-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2019-05-12 | PDF 3.2 MB |
| Internal PHotos | Internal Photos | 2019-05-12 | PDF 2.5 MB |
| Internal Photos | Internal Photos | 2019-05-12 | PDF 2.5 MB |
| External Photos | External Photos | 2019-05-12 | PDF 633 KB |
| Label Info | ID Label/Location Info | 2018-11-13 | PDF 160.3 KB |
| Test Setup Photos | Test Setup Photos | 2019-05-12 | PDF 170.2 KB |
| Test Report 1 | Test Report | 2018-11-13 | PDF 2.3 MB |
| Test Report IEC | Test Report | 2018-11-13 | PDF 1.5 MB |
| Test Report Part 80 | Test Report | 2018-11-13 | PDF 2.1 MB |
| Test Report RF | Test Report | 2018-11-13 | PDF 183.6 KB |
| Channel Statement DTS | Cover Letter(s) | 2018-11-13 | PDF 110.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2018-11-13 | PDF 235.2 KB |
| DSC Compliance Letter | Cover Letter(s) | 2018-11-13 | PDF 12.7 KB |
| POA Letter | Cover Letter(s) | 2018-11-13 | PDF 18.2 KB |
| POA leter | Cover Letter(s) | 2018-11-13 | PDF 18.2 KB |
| RF Exposure Info | RF Exposure Info | 2018-11-13 | PDF 183.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 756.8 KB | |
| Schematics Metadata only | Schematics | PDF 1.5 MB | |
| Oper Description Metadata only | Operational Description | PDF 183.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 183.9 KB | |
| Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 23.4 KB |
Application Information
| Application ID | vFcUAFBom3t3yGsmUIO4vA== |
|---|---|
| Final Action Date | 2018-11-13 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0013828637 |
| Model | VHFRS40 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | B&G; V60, SIMRAD RS40 |
| Responsible Party | John Lloyd, VP, Global Quality, Quality assurance, John.Lloyd@navico.com , +52 646-175-1123 |
| Technical Contact | Keny Xu, SGS-CSTC Standards Technical Services Co., Ltd, keny.xu@sgs.com , 075526544119 |
| Non-Technical Contact | Jing Song, SGS-CSTC Standards Technical Services Co., Ltd, jing.song@sgs.com , 075525328659 |
| Test Firm | Derek Yang, SGS-CSTC Standards Technical Services Co., Ltd, Derek-WZ.yang@sgs.com , +86 0135 6484 8721 |
| TCB Email | uscts.tcb@sgs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/12/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is at the antenna connector. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. This product only support 20MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vFcUAFBom3t3yGsmUIO4vA== | 2018-11-13 | Original Equipment |
| sLhjFc3NA+5A0HCRRyuoLg== | 2018-11-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application vFcUAFBom3t3yGsmUIO4vA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 11/13/2018 Application Dated: 11/13/2018 |
| Navico Inc. |
| 4500 S. 129th East Avenue, |
| Ste. 200 |
| Tulsa, OK 74134 |
| Attention: John Lloyd , VP, Global Quality, Quality assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RAYVHFRS40 |
| Name of Grantee: | Navico Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | B&G V60, SIMRAD RS40 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0631 |
| Power output listed is at the antenna connector. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. This product only support 20MHz bandwidth mode. |
EAS Grant - Application vFcUAFBom3t3yGsmUIO4vA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Navico Inc. 4500 S. 129th East Avenue, Ste. 200 Tulsa, OK 74134 United States |
Date of Grant: 11/13/2018 Application Dated: 11/13/2018 |
| Attention: John Lloyd , VP, Global Quality, Quality assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RAYVHFRS40 |
| Name of Grantee: | Navico Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | B&G V60, SIMRAD RS40 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0631 |
| Power output listed is at the antenna connector. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. This product only support 20MHz bandwidth mode. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 11/13/2018 Application Dated: 11/13/2018 |
| Navico Inc. |
| 4500 S. 129th East Avenue, |
| Ste. 200 |
| Tulsa, OK 74134 |
| Attention: John Lloyd , VP, Global Quality, Quality assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RAYVHFRS40 |
| Name of Grantee: | Navico Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | B&G V60, SIMRAD RS40 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 2.5 PM | 15K1G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 2.5 PM | 15K1G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 2.5 PM | 13K1G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 2.5 PM | 13K1G2B |
| Power output listed is at the antenna connector. This device must not exceed a maximum transmitting duty factor of 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 2.0 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application sLhjFc3NA+5A0HCRRyuoLg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Navico Inc. 4500 S. 129th East Avenue, Ste. 200 Tulsa, OK 74134 United States |
Date of Grant: 11/13/2018 Application Dated: 11/13/2018 |
| Attention: John Lloyd , VP, Global Quality, Quality assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RAYVHFRS40 |
| Name of Grantee: | Navico Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | B&G V60, SIMRAD RS40 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 80 | 156.025 - 157.425 | 25.0 | 2.5 PM | 15K1G3E | |
| 80 | 156.025 - 157.425 | 1.0 | 2.5 PM | 15K1G3E | |
| 80 | 156.025 - 157.425 | 25.0 | 2.5 PM | 13K1G2B | |
| 80 | 156.025 - 157.425 | 1.0 | 2.5 PM | 13K1G2B |
| Power output listed is at the antenna connector. This device must not exceed a maximum transmitting duty factor of 50%. The antenna used for this transmitter must be installed to provide a separation distance of at least 2.0 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. |
| Mail To: |