FCC ID RBWESY22I1B

Touch All in one Computer

by Elo Touch Solutions, Inc.

Grantee Code: RBW   Product Code: ESY22I1B
Latest application date: 2020-02-05

FCC ID Device Details

FCC IDRBWESY22I1B
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRBW
Product CodeESY22I1B
Applicant BusinessElo Touch Solutions, Inc. 🇺🇸
Related Domains elotouch.com cerpass.com.tw
Equipment ClassTouch All in one Computer
Test FirmCerpass technology corporation Test Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-02-05
2402-2480 MHzOriginal Equipment2017-11-02
5180-5240 MHzOriginal Equipment2017-11-02
2402-2480 MHzOriginal Equipment2017-11-02

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-11-02PDF 1.2 MB
Internal PhotosInternal Photos2020-02-05PDF 1.7 MB
Internal PhotosInternal Photos2017-11-02PDF 791.1 KB
External PhotosExternal Photos2020-02-05PDF 1.6 MB
External PhotosExternal Photos2017-11-02PDF 373.2 KB
ID Label/Location InfoID Label/Location Info2017-11-02PDF 1.8 MB
Test Setup PhotosTest Setup Photos2020-02-05PDF 245.3 KB
Test Setup Photos_DSS Metadata onlyTest Report2017-11-02PDF 5.6 MB
Test Setup Photos_NIITest Setup Photos2017-11-02PDF 187.6 KB
Test report_DFSTest Report2020-02-05PDF 1.5 MB
Test report_WiFi 5G B2B3Test Report2020-02-05PDF 3.5 MB
Test report_Wifi 5G B2B3_MPERF Exposure Info2020-02-05PDF 43.1 KB
DTS Test Report_2.4GHzTest Report2017-11-02PDF 2.4 MB
DTS Test Report_BLETest Report2017-11-02PDF 2.3 MB
Test Report_DSSTest Report2017-11-02PDF 5.6 MB
Test Report_NIITest Report2017-11-02PDF 2.7 MB
C2PC Request LetterCover Letter(s)2020-02-05PDF 13.7 KB
ConfidentialityCover Letter(s)2020-02-05PDF 847.6 KB
Declaration of authorizationCover Letter(s)2020-02-05PDF 72.6 KB
Antenna SpecCover Letter(s)2017-11-02PDF 544.1 KB
Declaration of authorizationCover Letter(s)2017-11-02PDF 133.6 KB
confidentialityCover Letter(s)2017-11-02PDF 221.6 KB
MPE ReportRF Exposure Info2017-11-02PDF 66.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 238.4 KB
Schematics Metadata onlySchematicsPDF 1.1 MB
NII Software Security Info Metadata onlyOperational DescriptionPDF 112.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.3 MB
Operational Description_Software Security Info Metadata onlyOperational DescriptionPDF 971.6 KB

Application Information

Application ID7WBQCmyHzzTopNv4OpkjwA==
Final Action Date2020-02-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022239222
ModelESY22I1B
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionTouch All in one Computer
Responsible PartyAngela Huang, Safety Engineer, angela.huang@elotouch.com , 886-2-8768-2788
AgentDelia Delia Delia, Cerpass Technology Corporation, deliaf@cerpass.com.tw , 886-3-3226-888
Technical ContactAngela Huang, Elo Touch Solutions, Inc., angela.huang@elotouch.com , 886-2-77433671
Non-Technical ContactDelia Feng, Cerpass Technology Corp., deliaf@cerpass.com.tw , 886-3-3226-888
Test FirmBen Wang, Cerpass technology corporation Test Laboratory, benw@cerpass.com.tw , +886-3-3226888
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC:This modification is only for concerned with adding frequency range: 5250-5350 MHz and 5470-5725 MHz; neither circuit design nor main function has been changed. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210, and 5775 MHz.

Applications

Application IDDatePurpose
7WBQCmyHzzTopNv4OpkjwA==2020-02-05Class II permissive change or modification of presently authorized equipment
br+wrWKT8whg8kzY8LRNXg==2017-11-02Original Equipment
VKa3Oad8HaHZgrO2u3kgfQ==2017-11-02Original Equipment
CZ1++5pvaUyn7kPdn+7uuQ==2017-11-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005000015CCC
2402-2480 MHz0.00515CCC
2412-2462 MHz0.1915CCC
5180-5240 MHz0.01515ECC
5180-5240 MHz0.01515E38, CC
5260-5320 MHz0.02715ECC
5500-5700 MHz0.02515ECC
5745-5825 MHz0.01215E38, CC
5745-5825 MHz0.01215ECC

Grants

TCB Grant - Application VKa3Oad8HaHZgrO2u3kgfQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/02/2017

Application Dated: 10/30/2017
Elo Touch Solutions, Inc.
670 N. McCarthy Blvd.
Suite 100
Milpitas, CA 95035
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Touch All in one Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.015  
38 CC 15E 5745.0  -  5825.0 0.012  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210, and 5775 MHz.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VKa3Oad8HaHZgrO2u3kgfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elo Touch Solutions, Inc.
670 N. McCarthy Blvd. Suite 100
Milpitas, CA 95035
United States
  Date of Grant: 11/02/2017

Application Dated: 10/30/2017
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Touch All in one Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.015  
38 CC 15E 5745.0  -  5825.0 0.012  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210, and 5775 MHz.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CZ1++5pvaUyn7kPdn+7uuQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/02/2017

Application Dated: 10/30/2017
Elo Touch Solutions, Inc.
670 N. McCarthy Blvd.
Suite 100
Milpitas, CA 95035
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Touch All in one Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.19  
CC 15C 2402.0  -  2480.0 0.005  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CZ1++5pvaUyn7kPdn+7uuQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elo Touch Solutions, Inc.
670 N. McCarthy Blvd. Suite 100
Milpitas, CA 95035
United States
  Date of Grant: 11/02/2017

Application Dated: 10/30/2017
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Touch All in one Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.19  
CC 15C 2402.0  -  2480.0 0.005  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application br+wrWKT8whg8kzY8LRNXg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/02/2017

Application Dated: 10/30/2017
Elo Touch Solutions, Inc.
670 N. McCarthy Blvd.
Suite 100
Milpitas, CA 95035
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Touch All in one Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Output power listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application br+wrWKT8whg8kzY8LRNXg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elo Touch Solutions, Inc.
670 N. McCarthy Blvd. Suite 100
Milpitas, CA 95035
United States
  Date of Grant: 11/02/2017

Application Dated: 10/30/2017
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Touch All in one Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Output power listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7WBQCmyHzzTopNv4OpkjwA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 02/05/2020

Application Dated: 01/20/2020
Elo Touch Solutions, Inc.
670 N. McCarthy Blvd.
Suite 100
Milpitas, CA 95035
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Touch All in one Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.015  
CC 15E 5260.0  -  5320.0 0.027  
CC 15E 5500.0  -  5700.0 0.025  
CC 15E 5745.0  -  5825.0 0.012  

C2PC:This modification is only for concerned with adding frequency range: 5250-5350 MHz and 5470-5725 MHz; neither circuit design nor main function has been changed.

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210, and 5775 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7WBQCmyHzzTopNv4OpkjwA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elo Touch Solutions, Inc.
670 N. McCarthy Blvd. Suite 100
Milpitas, CA 95035
United States
  Date of Grant: 02/05/2020

Application Dated: 01/20/2020
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWESY22I1B
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Touch All in one Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.015  
CC 15E 5260.0  -  5320.0 0.027  
CC 15E 5500.0  -  5700.0 0.025  
CC 15E 5745.0  -  5825.0 0.012  

C2PC:This modification is only for concerned with adding frequency range: 5250-5350 MHz and 5470-5725 MHz; neither circuit design nor main function has been changed.

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210, and 5775 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: