FCC ID RBWPAYPOINT

POS

by Elo Touch Solutions, Inc.

Grantee Code: RBW   Product Code: PAYPOINT
Latest application date: 2017-07-04

FCC ID Device Details

FCC IDRBWPAYPOINT
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRBW
Product CodePAYPOINT
Applicant BusinessElo Touch Solutions, Inc. 🇺🇸
Related Domains elotouch.com
Equipment ClassPOS
Test FirmSPORTON INTERNATIONAL(KUN SHAN)INC.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2017-07-04
2402-2480 MHzOriginal Equipment2017-07-04
5180-5240 MHzOriginal Equipment2017-07-04

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2017-12-30PDF 683 KB
Internal photos part 1Internal Photos2017-12-30PDF 5.5 MB
Internal photos part 2Internal Photos2017-12-30PDF 5.3 MB
Internal photos part 3Internal Photos2017-12-30PDF 5.4 MB
Internal photos part 4Internal Photos2017-12-30PDF 5.3 MB
Internal photos part 5Internal Photos2017-12-30PDF 5.3 MB
Internal photos part 6Internal Photos2017-12-30PDF 4.6 MB
External photosExternal Photos2017-12-30PDF 1.1 MB
LabelID Label/Location Info2017-07-04PDF 391.1 KB
Label locationID Label/Location Info2017-07-04PDF 88.7 KB
Test setupTest Setup Photos2017-12-30PDF 304.4 KB
Test setupTest Setup Photos2017-12-30PDF 308 KB
Test setupTest Setup Photos2017-12-30PDF 304.6 KB
Test reportTest Report2017-07-04PDF 2.3 MB
Test reportTest Report2017-07-04PDF 4.3 MB
Test reportTest Report2017-07-04PDF 2.4 MB
Test reportTest Report2017-07-04PDF 4.6 MB
Cover letterCover Letter(s)2017-07-04PDF 247.8 KB
RF exposureRF Exposure Info2017-07-04PDF 327.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 105.9 KB
Schematics Metadata onlySchematicsPDF 958.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 557 KB
Software Security Metadata onlySDR Software/Security InfPDF 79.4 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 241.2 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 60.9 KB

Application Information

Application IDhLxz3/MtId8UvLWyAKlC8Q==
Final Action Date2017-07-04
Application PurposeOriginal Equipment
Applicant FRN0022239222
ModelPAYPOINT
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionPOS
Responsible PartyAngela Huang, Safety Engineer, angela.huang@elotouch.com , 886-2-8768-2788
Test FirmAlex Chen, SPORTON INTERNATIONAL(KUN SHAN)INC., alex@sporton.com.tw , 886-3-3273456
TCB Emailstuart.beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/30/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
hLxz3/MtId8UvLWyAKlC8Q==2017-07-04Original Equipment
Ytnn7Wg1NVH294ARDBepRQ==2017-07-04Original Equipment
TBLjP3Bfjo7eid2uj6uxaw==2017-07-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005600015CCC
2402-2480 MHz0.001415CCC
2412-2462 MHz0.120815CCC
5180-5240 MHz0.032915E38, CC
5745-5825 MHz0.031315E38, CC

Grants

TCB Grant - Application Ytnn7Wg1NVH294ARDBepRQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/04/2017

Application Dated: 06/30/2017
Elo Touch Solutions, Inc.
670 N. McCarthy Blvd.
Suite 100
Milpitas, CA 95035
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWPAYPOINT
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0014  
CC 15C 2412.0  -  2462.0 0.1208  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Ytnn7Wg1NVH294ARDBepRQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elo Touch Solutions, Inc.
670 N. McCarthy Blvd. Suite 100
Milpitas, CA 95035
United States
  Date of Grant: 07/04/2017

Application Dated: 06/30/2017
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWPAYPOINT
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0014  
CC 15C 2412.0  -  2462.0 0.1208  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TBLjP3Bfjo7eid2uj6uxaw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/04/2017

Application Dated: 06/30/2017
Elo Touch Solutions, Inc.
670 N. McCarthy Blvd.
Suite 100
Milpitas, CA 95035
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWPAYPOINT
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0329  
38 CC 15E 5745.0  -  5825.0 0.0313  

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TBLjP3Bfjo7eid2uj6uxaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elo Touch Solutions, Inc.
670 N. McCarthy Blvd. Suite 100
Milpitas, CA 95035
United States
  Date of Grant: 07/04/2017

Application Dated: 06/30/2017
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWPAYPOINT
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0329  
38 CC 15E 5745.0  -  5825.0 0.0313  

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hLxz3/MtId8UvLWyAKlC8Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/04/2017

Application Dated: 06/30/2017
Elo Touch Solutions, Inc.
670 N. McCarthy Blvd.
Suite 100
Milpitas, CA 95035
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWPAYPOINT
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0056  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application hLxz3/MtId8UvLWyAKlC8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elo Touch Solutions, Inc.
670 N. McCarthy Blvd. Suite 100
Milpitas, CA 95035
United States
  Date of Grant: 07/04/2017

Application Dated: 06/30/2017
 
Attention: Angela Huang , Safety Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RBWPAYPOINT
Name of Grantee:  Elo Touch Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0056  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: