1. FCC ID
  2. RC9
  3. RC9-AH100

FCC ID RC9-AH100

802.11b Access Point

by AirFlow Networks

Grantee Code: RC9   Product Code: AH100
Latest application date: 2004-01-31

FCC ID Device Details

FCC IDRC9-AH100
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRC9
Product CodeAH100
Applicant BusinessAirFlow Networks 🇺🇸
Related Domains airflownetworks.com elliottlabs.com
Equipment Class802.11b Access Point
Test FirmElliott Laboratories LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-01-31
2412-2462 MHzOriginal Equipment2003-09-08

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2003-09-08PDF 1.3 MB
Internal PhotosInternal Photos2004-01-31PDF 132.5 KB
Internal PhotosInternal Photos2003-09-08PDF 790.8 KB
External PhotosExternal Photos2004-01-31PDF 107.9 KB
External PhotosExternal Photos2003-09-08PDF 160.9 KB
Label and LocationID Label/Location Info2003-09-08PDF 64.9 KB
DescriptionOperational Description2003-09-08PDF 5 KB
Test Photos RevisedTest Setup Photos2004-01-31PDF 156 KB
Test Setup PhotosTest Setup Photos2003-09-08PDF 314.9 KB
Test Report RevisedTest Report2004-01-31PDF 294.1 KB
Test ReportTest Report2003-09-08PDF 349.2 KB
Agent LetterCover Letter(s)2004-01-31PDF 91.1 KB
CommentsCover Letter(s)2004-01-31PDF 44.3 KB
Copy of Original GrantCover Letter(s)2004-01-31PDF 112.6 KB
Proposed ChangesCover Letter(s)2004-01-31PDF 8 KB
ResponseCover Letter(s)2004-01-31PDF 118.5 KB
AgencyCover Letter(s)2003-09-08PDF 91.1 KB
Class A LetterCover Letter(s)2003-09-08PDF 105.5 KB
ConfidentialityCover Letter(s)2003-09-08PDF 74.7 KB
Cover PageCover Letter(s)2003-09-08PDF 32.6 KB
MPE Information RevisedRF Exposure Info2004-01-31PDF 87.2 KB
RF Exposure InfoRF Exposure Info2003-09-08PDF 8.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 58.9 KB
Schematices RF Metadata onlySchematicsPDF 182.5 KB
Schematics Digital Metadata onlySchematicsPDF 325 KB

Application Information

Application IDGsO44QeGdV+hdkbKj8Avbw==
Final Action Date2004-01-31
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022070668
ModelAH100
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b Access Point
Responsible PartyPaul M Richards, SR RF Engineer, prichards@airflownetworks.com , 408-524-3123
AgentMark Mark Mark, Elliott Laboratories Inc., doc@elliottlabs.com , 408-245-7800
Technical ContactMark Briggs, Elliott Laboratories Inc., doc@elliottlabs.com , 408-245-7800
Non-Technical ContactDavid Guidotti, Elliott Laboratories Inc., doc@elliottlabs.com , 408-245-7800
Test FirmDavid Bare, Elliott Laboratories LLC, dbare@elliottlabs.com , 408-245-7800
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
GsO44QeGdV+hdkbKj8Avbw==2004-01-31Class II permissive change or modification of presently authorized equipment
2U0XW2MUR7URSLTI1sxMZw==2003-09-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.087000015CCE

Grants

TCB Grant - Application GsO44QeGdV+hdkbKj8Avbw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 01/31/2004

Application Dated: 01/31/2004
AirFlow Networks
455 W. Maude Ave.
Sunnyvale, CA 94085
 
Attention: Paul Richards , SR RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RC9-AH100
Name of Grantee:  AirFlow Networks
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.087  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application GsO44QeGdV+hdkbKj8Avbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

AirFlow Networks
455 W. Maude Ave.
Sunnyvale, CA 94085
United States 		  Date of Grant: 01/31/2004

Application Dated: 01/31/2004
 
Attention: Paul Richards , SR RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RC9-AH100
Name of Grantee:  AirFlow Networks
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.087  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 2U0XW2MUR7URSLTI1sxMZw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 09/08/2003

Application Dated: 09/08/2003
AirFlow Networks
455 W. Maude Ave.
Sunnyvale, CA 94085
 
Attention: Paul Richards , SR RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RC9-AH100
Name of Grantee:  AirFlow Networks
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.087  

This device is considered a Class A peripheral

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 2U0XW2MUR7URSLTI1sxMZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

AirFlow Networks
455 W. Maude Ave.
Sunnyvale, CA 94085
United States 		  Date of Grant: 09/08/2003

Application Dated: 09/08/2003
 
Attention: Paul Richards , SR RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RC9-AH100
Name of Grantee:  AirFlow Networks
Equipment Class: Digital Transmission System
Notes: 802.11b Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2412.0  -  2462.0 0.087  

This device is considered a Class A peripheral

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: