FCC ID RCX-EE11ABG3

802.11 a/b/g Emulation Engine

by Ixia

Grantee Code: RCX   Product Code: EE11ABG3
Latest application date: 2005-06-21

FCC ID Device Details

FCC IDRCX-EE11ABG3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRCX
Product CodeEE11ABG3
Applicant BusinessIxia 🇺🇸
Related Domains ixiacom.com
Equipment Class802.11 a/b/g Emulation Engine
Test FirmBay Area Compliance Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2005-06-21
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-06-21
2412-2462 MHzOriginal Equipment2004-05-10
5180-5240 MHzOriginal Equipment2004-05-10

Exhibits

DocumentTypeAvailableFile
User Manual part 1Users Manual2004-05-10PDF 2.1 MB
User Manual part 2Users Manual2004-05-10PDF 1.9 MB
User Manual part 3Users Manual2004-05-10PDF 1.3 MB
Internal PhotosInternal Photos2005-06-21PDF 450.3 KB
Internal PhotosInternal Photos2004-05-10PDF 2.6 MB
External PhotosExternal Photos2005-06-21PDF 170.1 KB
External PhotosExternal Photos2004-05-10PDF 707.7 KB
POWER SUPPLY PICTURESExternal Photos2004-05-10PDF 147.2 KB
FCC ID Label InformationID Label/Location Info2005-06-21PDF 32.3 KB
FCC ID LabelID Label/Location Info2004-05-10PDF 182.5 KB
Antenna SpecificationOperational Description2005-06-21PDF 2.4 MB
Theory of OperationOperational Description2004-05-10PDF 691.8 KB
Test Setup PhotosTest Setup Photos2005-06-21PDF 92.8 KB
Setup PhotosTest Setup Photos2004-05-10PDF 834.7 KB
Test ReportTest Report2005-06-21PDF 158.5 KB
Test ReportTest Report2004-05-10PDF 2.9 MB
Test ReportTest Report2004-05-10PDF 2.6 MB
Test Report attachmentTest Report2004-05-10PDF 714.5 KB
Test Report attachmentTest Report2004-05-10PDF 1.4 MB
Permissive Change Request LetterCover Letter(s)2005-06-21PDF 471.5 KB
Authorization LetterCover Letter(s)2004-05-10PDF 216.7 KB
Request for ConfidentialityCover Letter(s)2004-05-10PDF 37 KB
Requirements of 15407 cCover Letter(s)2004-05-10PDF 86.9 KB
TCB Q and ACover Letter(s)2004-05-10PDF 102.7 KB
TCB Q and ACover Letter(s)2004-05-10PDF 8.9 KB
TCB cover letterCover Letter(s)2004-05-10PDF 102.7 KB
MPE CalculationRF Exposure Info2005-06-21PDF 22.3 KB
Antenna InformationParts List/Tune Up Info2004-05-10PDF 118.5 KB
MPERF Exposure Info2004-05-10PDF 136.4 KB
MPERF Exposure Info2004-05-10PDF 69.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 119.2 KB
Encyrption Card Schematics Metadata onlySchematicsPDF 698.2 KB
Main Board Schematics Metadata onlySchematicsPDF 510.6 KB
Schematics Metadata onlySchematicsPDF 193.9 KB

Application Information

Application IDc1u7JYvyDMRY3HCVaQv0cg==
Final Action Date2005-06-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009369141
ModelEE11ABG3
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11 a/b/g Emulation Engine
Responsible PartyAl Cummins, Sr. Compliance Engr, acummins@ixiacom.com , (818) 871-1800
Test FirmJohn Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
c1u7JYvyDMRY3HCVaQv0cg==2005-06-21Class II permissive change or modification of presently authorized equipment
Yerb5ULVx3dT39TWKfN6xA==2005-06-21Class II permissive change or modification of presently authorized equipment
SEr56R1nrLWM5+i31Bt2+A==2004-05-10Original Equipment
PrjbzfavKu74xI0A3m4seg==2004-05-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.13815CCC, CE
2412-2462 MHz0.13815C
5180-5240 MHz0.026415E
5180-5240 MHz0.026415ECC, CE
5260-5320 MHz0.028815E
5260-5320 MHz0.028815ECC, CE
5745-5825 MHz0.235515CCC, CE
5745-5825 MHz0.235515C

Grants

TCB Grant - Application Yerb5ULVx3dT39TWKfN6xA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/21/2005

Application Dated: 06/21/2005
Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Emulation Engine
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.138  
15C 5745.0  -  5825.0 0.2355  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Yerb5ULVx3dT39TWKfN6xA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
United States
  Date of Grant: 06/21/2005

Application Dated: 06/21/2005
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Emulation Engine
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.138  
15C 5745.0  -  5825.0 0.2355  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application SEr56R1nrLWM5+i31Bt2+A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/10/2004

Application Dated: 05/10/2004
Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Emulation Engine
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.138  
CC CE 15C 5745.0  -  5825.0 0.2355  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application SEr56R1nrLWM5+i31Bt2+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
United States
  Date of Grant: 05/10/2004

Application Dated: 05/10/2004
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Emulation Engine
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.138  
CC CE 15C 5745.0  -  5825.0 0.2355  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application PrjbzfavKu74xI0A3m4seg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/10/2004

Application Dated: 05/10/2004
Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Emulation Engine
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5240.0 0.0264  
CC CE 15E 5260.0  -  5320.0 0.0288  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) transition period.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application PrjbzfavKu74xI0A3m4seg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
United States
  Date of Grant: 05/10/2004

Application Dated: 05/10/2004
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Emulation Engine
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5240.0 0.0264  
CC CE 15E 5260.0  -  5320.0 0.0288  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) transition period.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application c1u7JYvyDMRY3HCVaQv0cg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/21/2005

Application Dated: 06/21/2005
Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Emulation Engine
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0264  
15E 5260.0  -  5320.0 0.0288  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application c1u7JYvyDMRY3HCVaQv0cg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
United States
  Date of Grant: 06/21/2005

Application Dated: 06/21/2005
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG3
Name of Grantee:  Ixia
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Emulation Engine
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0264  
15E 5260.0  -  5320.0 0.0288  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: