FCC ID RCX-EE11ABG4

802.11a/b/g WLAN Mini-PCI Module

by Ixia

Grantee Code: RCX   Product Code: EE11ABG4
Latest application date: 2006-08-19

FCC ID Device Details

FCC IDRCX-EE11ABG4
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRCX
Product CodeEE11ABG4
Applicant BusinessIxia 🇺🇸
Related Domains ixiacom.com
Equipment Class802.11a/b/g WLAN Mini-PCI Module
Test FirmBay Area Compliance Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: MCLJ07H06903 Grant Date: 03/27/20032006-08-19
5180-5250 MHzChange in identification of presently authorized equipment. Original FCC ID: MCLJ07H06903 Grant Date: 03/27/20032006-08-19

Exhibits

DocumentTypeAvailableFile
Internal PhotoInternal Photos2006-08-19PDF 219.4 KB
External PhotoExternal Photos2006-08-19PDF 124.3 KB
FCC ID LabelID Label/Location Info2006-08-19PDF 247 KB
Cover LetterCover Letter(s)2006-08-19PDF 109 KB

Application Information

Application IDlbaFdAeBYurNOhcpjbNVSQ==
Final Action Date2006-08-19
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: MCLJ07H06903 Grant Date: 03/27/2003
Applicant FRN0009369141
ModelEE11ABG4
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11a/b/g WLAN Mini-PCI Module
Responsible PartyAl Cummins, Sr. Compliance Engr, acummins@ixiacom.com , (818) 871-1800
Test FirmJohn Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
lbaFdAeBYurNOhcpjbNVSQ==2006-08-19Change in identification of presently authorized equipment. Original FCC ID: MCLJ07H06903 Grant Date: 03/27/2003
4Enu1A8VC7ahw+sZTtIbWA==2006-08-19Change in identification of presently authorized equipment. Original FCC ID: MCLJ07H06903 Grant Date: 03/27/2003

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.15815C
5180-5250 MHz0.04415E
5260-5320 MHz0.05615E
5745-5825 MHz0.11815C

Grants

TCB Grant - Application lbaFdAeBYurNOhcpjbNVSQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/19/2006

Application Dated: 08/19/2006
Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG4
Name of Grantee:  Ixia
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g WLAN Mini-PCI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.158  
15C 5745.0  -  5825.0 0.118  

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application lbaFdAeBYurNOhcpjbNVSQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
United States
  Date of Grant: 08/19/2006

Application Dated: 08/19/2006
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG4
Name of Grantee:  Ixia
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g WLAN Mini-PCI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.158  
15C 5745.0  -  5825.0 0.118  

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application 4Enu1A8VC7ahw+sZTtIbWA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/19/2006

Application Dated: 08/19/2006
Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG4
Name of Grantee:  Ixia
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g WLAN Mini-PCI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5250.0 0.044  
15E 5260.0  -  5320.0 0.056  

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee and OEM integrators must ensure that installation procedures comply with 15.407(d) integral antenna requirements to prevent end-user access to the transmitter module after installation. Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only.

EAS Grant - Application 4Enu1A8VC7ahw+sZTtIbWA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ixia
26601 W. Agoura Rd
Calabasas, CA 91302
United States
  Date of Grant: 08/19/2006

Application Dated: 08/19/2006
 
Attention: Al Cummins , Sr. Compliance Engr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RCX-EE11ABG4
Name of Grantee:  Ixia
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g WLAN Mini-PCI Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5250.0 0.044  
15E 5260.0  -  5320.0 0.056  

Limited Modular Approval. Output power is conducted. Approval is limited to OEM installation only, user installation is prohibited. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee and OEM integrators must ensure that installation procedures comply with 15.407(d) integral antenna requirements to prevent end-user access to the transmitter module after installation. Operation in the 5.15 GHz to 5.25 GHz frequency range is restricted to indoor use only.



Mail To: