FCC ID RD9CM840
IEEE802.11g Wireless Radio
by L-3 Communications Corporation, Display Systems
Grantee Code: RD9 Product Code: CM840
Latest application date: 2013-01-31
FCC ID Device Details
| FCC ID | RD9CM840 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RD9 |
| Product Code | CM840 |
| Applicant Business | L-3 Communications Corporation, Display Systems 🇺🇸 |
| Related Domains |  l-3com.com |
| Equipment Class | IEEE802.11g Wireless Radio |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-01-31 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: SVE-WMPG10 Grant Date: 02/04/2005 | 2013-01-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2013-01-09 | PDF 499.5 KB |
| External Photos | External Photos | 2013-01-31 | PDF 1.7 MB |
| External Photos | External Photos | 2013-01-09 | PDF 83.5 KB |
| Label and Label Location | ID Label/Location Info | 2013-01-09 | PDF 87.9 KB |
| Cover Letters | Cover Letter(s) | 2013-01-31 | PDF 45.4 KB |
| Cover Letters | Cover Letter(s) | 2013-01-09 | PDF 45.3 KB |
| RF Exposure info | RF Exposure Info | 2013-01-31 | PDF 2 MB |
Application Information
| Application ID | qaBDQMz4b9Zu5CiGYAzF4Q== |
|---|---|
| Final Action Date | 2013-01-31 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022244115 |
| Model | CM840 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE802.11g Wireless Radio |
| Responsible Party | Tom E Brown, Engineering Program Manager, tom.e.brown@l-3com.com , 770-752-5080 |
| Agent | Michelle Michelle Michelle, Nemko USA, Inc., michelle.furrow@nemko.com  , 9724369600 |
| Technical Contact | David Ball, L3 Communications Display Systems, david.j.ball@l-3com.com , 7703468294 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, tommy.wu@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | Stuart.Beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Limited Modular Approval for portable RF exposure conditions per section 2.1093 of FCC rules is limited to OEM installation only with the dedicated host as per described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. Highest reported SAR value for body is 1.35 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qaBDQMz4b9Zu5CiGYAzF4Q== | 2013-01-31 | Class II permissive change or modification of presently authorized equipment |
| RhXaaIb5utXgwrV59MFG7A== | 2013-01-09 | Change in identification of presently authorized equipment. Original FCC ID: SVE-WMPG10 Grant Date: 02/04/2005 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1630000 | 15C |
Grants
TCB Grant - Application RhXaaIb5utXgwrV59MFG7A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/09/2013 Application Dated: 01/09/2013 |
| L-3 Communications Corporation, Display Systems |
| 1355 Bluegrass Lakes Parkway |
| Alpharetta, GA 30004-8458 |
| Attention: Tom Brown , Engineering Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RD9CM840 |
| Name of Grantee: | L-3 Communications Corporation, Display Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Wireless Radio |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application RhXaaIb5utXgwrV59MFG7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
L-3 Communications Corporation, Display Systems 1355 Bluegrass Lakes Parkway Alpharetta, GA 30004-8458 United States |
Date of Grant: 01/09/2013 Application Dated: 01/09/2013 |
| Attention: Tom Brown , Engineering Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RD9CM840 |
| Name of Grantee: | L-3 Communications Corporation, Display Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Wireless Radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/31/2013 Application Dated: 01/31/2013 |
| L-3 Communications Corporation, Display Systems |
| 1355 Bluegrass Lakes Parkway |
| Alpharetta, GA 30004-8458 |
| Attention: Tom Brown , Engineering Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RD9CM840 |
| Name of Grantee: | L-3 Communications Corporation, Display Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Wireless Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Limited Modular Approval for portable RF exposure conditions per section 2.1093 of FCC rules is limited to OEM installation only with the dedicated host as per described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. Highest reported SAR value for body is 1.35 W/kg. |
EAS Grant - Application qaBDQMz4b9Zu5CiGYAzF4Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
L-3 Communications Corporation, Display Systems 1355 Bluegrass Lakes Parkway Alpharetta, GA 30004-8458 United States |
Date of Grant: 01/31/2013 Application Dated: 01/31/2013 |
| Attention: Tom Brown , Engineering Program Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RD9CM840 |
| Name of Grantee: | L-3 Communications Corporation, Display Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11g Wireless Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Limited Modular Approval for portable RF exposure conditions per section 2.1093 of FCC rules is limited to OEM installation only with the dedicated host as per described in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. Highest reported SAR value for body is 1.35 W/kg. |
| Mail To: |