FCC ID RE7-AP100
802.11b Access Point
by Meru Networks Inc.
Grantee Code: RE7 Product Code: AP100
Latest application date: 2004-01-23
FCC ID Device Details
| FCC ID | RE7-AP100 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RE7 |
| Product Code | AP100 |
| Applicant Business | Meru Networks Inc. 🇺🇸 |
| Related Domains |  merunetworks.com |
| Equipment Class | 802.11b Access Point |
| Test Firm | Bay Area Compliance Laboratory |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-01-23 |
| 2412-2462 MHz | Original Equipment | 2003-10-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| professional installation | Users Manual | 2003-10-07 | PDF 1,022.5 KB |
| users manual 2 | Users Manual | 2003-10-07 | PDF 154.5 KB |
| Internal Photos | Internal Photos | 2004-01-23 | PDF 542.9 KB |
| internal photos | Internal Photos | 2003-10-07 | PDF 1.2 MB |
| External Photos | External Photos | 2004-01-23 | PDF 146.3 KB |
| external photos | External Photos | 2003-10-07 | PDF 712.2 KB |
| FCC ID Label Information | ID Label/Location Info | 2004-01-23 | PDF 61.8 KB |
| ID label and location info | ID Label/Location Info | 2003-10-07 | PDF 29.4 KB |
| antenna list | Operational Description | 2003-10-07 | PDF 33 KB |
| antenna spec 1 | Operational Description | 2003-10-07 | PDF 445.5 KB |
| antenna spec 3 | Operational Description | 2003-10-07 | PDF 220.1 KB |
| antenna spec 4 | Operational Description | 2003-10-07 | PDF 376.5 KB |
| Test Setup Photos | Test Setup Photos | 2004-01-23 | PDF 221.8 KB |
| test setup photos | Test Setup Photos | 2003-10-07 | PDF 576.1 KB |
| Test Report | Test Report | 2004-01-23 | PDF 1.3 MB |
| test report | Test Report | 2003-10-07 | PDF 1.7 MB |
| Permissive II Change Request Letter | Cover Letter(s) | 2004-01-23 | PDF 85.9 KB |
| confidentiality request | Cover Letter(s) | 2003-10-07 | PDF 110.6 KB |
| confidentiality request attachment | Cover Letter(s) | 2003-10-07 | PDF 90.2 KB |
| MPE calculation | RF Exposure Info | 2003-10-07 | PDF 12.4 KB |
| block diagram 1 Metadata only | Block Diagram | PDF 15.3 KB | |
| block diagram 2 Metadata only | Block Diagram | PDF 9.4 KB | |
| schematics Metadata only | Schematics | PDF 139.1 KB | |
| schematics 2 Metadata only | Schematics | PDF 358.9 KB | |
| theory of operation 1 Metadata only | Operational Description | PDF 143.6 KB | |
| theory of operation 2 Metadata only | Operational Description | PDF 75.4 KB |
Application Information
| Application ID | vTRsYpmqDt2BRj1JbtBOkg== |
|---|---|
| Final Action Date | 2004-01-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0009334731 |
| Model | AP100 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b Access Point |
| Responsible Party | Rajendran V Chary, Principal Engineer, rchary@merunetworks.com , 408-215-5338 |
| Test Firm | John Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com  , 408-732-9162 |
| TCB Email | johnc@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vTRsYpmqDt2BRj1JbtBOkg== | 2004-01-23 | Class II permissive change or modification of presently authorized equipment |
| 5gbHwX336Ora2l8tCWkAYA== | 2003-10-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application vTRsYpmqDt2BRj1JbtBOkg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/23/2004 Application Dated: 01/23/2004 |
| Meru Networks Inc. |
| 894 Ross Drive |
| Sunnyvale, CA 94089 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP100 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.236 |
| Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application vTRsYpmqDt2BRj1JbtBOkg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meru Networks Inc. 894 Ross Drive Sunnyvale, CA 94089 United States |
Date of Grant: 01/23/2004 Application Dated: 01/23/2004 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP100 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.236 |
| Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 10/07/2003 Application Dated: 10/07/2003 |
| Meru Networks Inc. |
| 894 Ross Drive |
| Sunnyvale, CA 94089 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP100 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.236 |
| Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This filling has included the following antennas: 830-00004-0000, 830-00005-0000, 830-00007-0000, 830-00008-0000, 830-00009-0000, 830-00010-0000, 830-00011-0000, 830-00012-0000 and 830-00014-0000. |
EAS Grant - Application 5gbHwX336Ora2l8tCWkAYA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meru Networks Inc. 894 Ross Drive Sunnyvale, CA 94089 United States |
Date of Grant: 10/07/2003 Application Dated: 10/07/2003 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP100 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.236 |
| Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This filling has included the following antennas: 830-00004-0000, 830-00005-0000, 830-00007-0000, 830-00008-0000, 830-00009-0000, 830-00010-0000, 830-00011-0000, 830-00012-0000 and 830-00014-0000. |
| Mail To: |