FCC ID RE7-AP200

802.11a/b/g Wireless Access Point

by Meru Networks Inc.

Grantee Code: RE7   Product Code: AP200
Latest application date: 2005-06-17

FCC ID Device Details

FCC IDRE7-AP200
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRE7
Product CodeAP200
Applicant BusinessMeru Networks Inc. 🇺🇸
Related Domains merunetworks.com
Equipment Class802.11a/b/g Wireless Access Point
Test FirmNational Technical Systems

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2005-06-17
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-06-10
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-02-23
2412-2462 MHzOriginal Equipment2004-12-16
5180-5240 MHzOriginal Equipment2004-12-10

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2005-02-23PDF 1.1 MB
User ManualUsers Manual2004-12-16PDF 1 MB
Users ManualUsers Manual2004-12-10PDF 1 MB
Internal PhotosInternal Photos2004-12-16PDF 381 KB
External PhotosExternal Photos2005-02-23PDF 349.6 KB
External PhotosExternal Photos2004-12-16PDF 150.1 KB
FCC ID Label InformationID Label/Location Info2005-02-23PDF 31.5 KB
FCC ID Label InformationID Label/Location Info2004-12-16PDF 33.2 KB
Antenna SpecificationOperational Description2005-02-23PDF 2 MB
Test Setup PhotosTest Setup Photos2005-06-17PDF 194 KB
Test Setup PhotosTest Setup Photos2005-02-23PDF 366 KB
Test Setup PhotosTest Setup Photos2004-12-16PDF 132.4 KB
Test ReportTest Report2005-06-17PDF 199.4 KB
Test ReportTest Report2005-02-23PDF 308.6 KB
MPE CalculationTest Report2004-12-16PDF 20.1 KB
Test ReportTest Report2004-12-16PDF 1.6 MB
Test ReportTest Report2004-12-10PDF 1.6 MB
Cover LetterCover Letter(s)2005-06-17PDF 447.4 KB
Cover LettersCover Letter(s)2005-06-10PDF 447.4 KB
Permissive Change request LetterCover Letter(s)2005-02-23PDF 14 KB
Confidentiality Request LetterCover Letter(s)2004-12-16PDF 23.7 KB
MPE CalculationsRF Exposure Info2005-06-17PDF 47.3 KB
MPE CalculationsRF Exposure Info2005-06-10PDF 47.3 KB
MPE CalculationRF Exposure Info2004-12-10PDF 20.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 19.9 KB
Schematics Metadata onlySchematicsPDF 139.3 KB
Description Metadata onlyOperational DescriptionPDF 42.3 KB
Descritpion Metadata onlyOperational DescriptionPDF 42.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 22.5 KB
Operational Description II Metadata onlyOperational DescriptionPDF 316.5 KB
Operational Description II Metadata onlyOperational DescriptionPDF 316.5 KB

Application Information

Application IDztMl/wm3Q+zpeBFwoV/4iw==
Final Action Date2005-06-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009334731
ModelAP200
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/b/g Wireless Access Point
Responsible PartyRajendran V Chary, Principal Engineer, rchary@merunetworks.com , 408-215-5338
Technical ContactJuan Martinez, Elliott Laboratories, Inc., doc@elliottlabs.com , 408-245-7800
Test FirmDavid Bare, National Technical Systems, david.bare@nts.com , 510-578-3500
TCB Emailhotline@americantcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ztMl/wm3Q+zpeBFwoV/4iw==2005-06-17Class II permissive change or modification of presently authorized equipment
76k9eZgkrOV99QkFgm/y5A==2005-06-10Class II permissive change or modification of presently authorized equipment
uZ41Yp/I4YhkOS4xdIRyEw==2005-02-23Class II permissive change or modification of presently authorized equipment
Ma+6dZWn+aKLZEavAW5pnQ==2004-12-16Original Equipment
mGLkctuSjT9qqOo6FKi8Hg==2004-12-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.07215CCC
2412-2462 MHz0.07215C
2412-2462 MHz0.072000015C
5180-5240 MHz0.004815E
5280-5320 MHz0.042915E
5745-5825 MHz0.01915CCC
5745-5825 MHz0.01915C

Grants

TCB Grant - Application ztMl/wm3Q+zpeBFwoV/4iw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/17/2005

Application Dated: 06/17/2005
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0048  
15E 5280.0  -  5320.0 0.0429  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application ztMl/wm3Q+zpeBFwoV/4iw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 06/17/2005

Application Dated: 06/17/2005
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0048  
15E 5280.0  -  5320.0 0.0429  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application uZ41Yp/I4YhkOS4xdIRyEw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/23/2005

Application Dated: 02/23/2005
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.072  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application uZ41Yp/I4YhkOS4xdIRyEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 02/23/2005

Application Dated: 02/23/2005
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.072  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application mGLkctuSjT9qqOo6FKi8Hg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 12/10/2004

Application Dated: 12/10/2004
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0048  
15E 5280.0  -  5320.0 0.0429  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application mGLkctuSjT9qqOo6FKi8Hg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 12/10/2004

Application Dated: 12/10/2004
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0048  
15E 5280.0  -  5320.0 0.0429  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application Ma+6dZWn+aKLZEavAW5pnQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 12/16/2004

Application Dated: 12/16/2004
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.072  
15C 5745.0  -  5825.0 0.019  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Ma+6dZWn+aKLZEavAW5pnQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 12/16/2004

Application Dated: 12/16/2004
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.072  
15C 5745.0  -  5825.0 0.019  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 76k9eZgkrOV99QkFgm/y5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/10/2005

Application Dated: 06/10/2005
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.072  
CC 15C 5745.0  -  5825.0 0.019  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 76k9eZgkrOV99QkFgm/y5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 06/10/2005

Application Dated: 06/10/2005
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP200
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.072  
CC 15C 5745.0  -  5825.0 0.019  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: