FCC ID RE7-AP433
802.11a/b/g/n WLAN PCI-E Radio Module
by Meru Networks Inc.
Grantee Code: RE7 Product Code: AP433
Latest application date: 2012-01-27
FCC ID Device Details
| FCC ID | RE7-AP433 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | RE7 |
| Product Code | AP433 |
| Applicant Business | Meru Networks Inc. 🇺🇸 |
| Related Domains |  merunetworks.com |
| Equipment Class | 802.11a/b/g/n WLAN PCI-E Radio Module |
| Test Firm | Bay Area Compliance Laboratory |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2012-01-27 |
| 2412-2462 MHz | Original Equipment | 2012-01-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2012-07-20 | PDF 65.9 KB |
| Internal Photos | Internal Photos | 2012-07-20 | PDF 98.5 KB |
| Internal Photos | Internal Photos | 2012-07-20 | PDF 98.5 KB |
| External Photos | External Photos | 2012-07-20 | PDF 219.6 KB |
| External Photos | External Photos | 2012-07-20 | PDF 301.6 KB |
| FCC ID Label | ID Label/Location Info | 2012-01-27 | PDF 110.6 KB |
| Test Setup Photos | Test Setup Photos | 2012-07-20 | PDF 947.3 KB |
| Test Setup Photos | Test Setup Photos | 2012-07-20 | PDF 1.4 MB |
| Test Report | Test Report | 2012-01-27 | PDF 1.6 MB |
| Test Report | Test Report | 2012-01-27 | PDF 4.1 MB |
| Confidential Request Letter | Cover Letter(s) | 2012-01-27 | PDF 238.6 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2012-01-27 | PDF 287.6 KB |
| Modular Approval Request letter | Cover Letter(s) | 2012-01-27 | PDF 287.6 KB |
| RF Exposure Information | RF Exposure Info | 2012-01-27 | PDF 26 KB |
| RF Exposure Information | RF Exposure Info | 2012-01-27 | PDF 29.4 KB |
Application Information
| Application ID | 6omQ54VujjKt09P6G69acA== |
|---|---|
| Final Action Date | 2012-01-27 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0009334731 |
| Model | -AP433 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n WLAN PCI-E Radio Module |
| Responsible Party | Rajendran V Chary, Principal Engineer, rchary@merunetworks.com , 408-215-5338 |
| Test Firm | John Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/20/2012 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Module Approval. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a half duplex PCI-E Mini Card operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations as described in this filing. Approval is limited to OEM installation only. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 6omQ54VujjKt09P6G69acA== | 2012-01-27 | Original Equipment |
| +66b0/farhloq62G3qZBqQ== | 2012-01-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 6omQ54VujjKt09P6G69acA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/27/2012 Application Dated: 01/27/2012 |
| Meru Networks Inc. |
| 894 Ross Drive |
| Sunnyvale, CA 94089 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP433 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN PCI-E Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0394 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0393 |
| Module Approval. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a half duplex PCI-E Mini Card operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations as described in this filing. Approval is limited to OEM installation only. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 6omQ54VujjKt09P6G69acA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meru Networks Inc. 894 Ross Drive Sunnyvale, CA 94089 United States |
Date of Grant: 01/27/2012 Application Dated: 01/27/2012 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP433 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n WLAN PCI-E Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0394 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0393 |
| Module Approval. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a half duplex PCI-E Mini Card operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations as described in this filing. Approval is limited to OEM installation only. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/27/2012 Application Dated: 01/27/2012 |
| Meru Networks Inc. |
| 894 Ross Drive |
| Sunnyvale, CA 94089 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP433 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN PCI-E Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5598 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.105 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.4539 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.2323 |
| Module Approval. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a half duplex PCI-E Mini Card operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations as described in this filing. Approval is limited to OEM installation only. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application +66b0/farhloq62G3qZBqQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meru Networks Inc. 894 Ross Drive Sunnyvale, CA 94089 United States |
Date of Grant: 01/27/2012 Application Dated: 01/27/2012 |
| Attention: Rajendran Chary , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RE7-AP433 |
| Name of Grantee: | Meru Networks Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n WLAN PCI-E Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5598 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.105 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.4539 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.2323 |
| Module Approval. Power listed is the maximum combined conducted output power as indicated in the filing. Device is a half duplex PCI-E Mini Card operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations as described in this filing. Approval is limited to OEM installation only. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |