FCC ID RE7-AP300

MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT

by Meru Networks Inc.

Grantee Code: RE7   Product Code: AP300
Latest application date: 2010-09-16

FCC ID Device Details

FCC IDRE7-AP300
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeRE7
Product CodeAP300
Applicant BusinessMeru Networks Inc. 🇺🇸
Related Domains merunetworks.com
Equipment ClassMULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2010-09-16
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-09-16
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2010-01-18
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-01-18
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-01-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2010-01-12
2412-2462 MHzOriginal Equipment2007-10-15
5180-5240 MHzOriginal Equipment2007-10-15

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2010-09-16PDF 1.1 MB
Users Manual Leaflet 1Users Manual2010-09-16PDF 404.4 KB
Users Manual Leaflet 2Users Manual2010-09-16PDF 267.2 KB
Users Manual Leaflet 3Users Manual2010-09-16PDF 312.5 KB
Users Manual Leaflet 4Users Manual2010-09-16PDF 390.1 KB
Users Manual Leaflet 5Users Manual2010-09-16PDF 883.4 KB
USERS MANUALUsers Manual2007-10-15PDF 966.2 KB
Internal Photos HighInternal Photos2010-09-16PDF 2.3 MB
Internal Photos LowInternal Photos2010-09-16PDF 2.3 MB
Internal PhotosInternal Photos2010-07-14PDF 1.2 MB
Internal PhotosInternal Photos2010-07-10PDF 1.2 MB
INTERNAL PHOTOSInternal Photos2007-10-15PDF 2.5 MB
External Photos HighExternal Photos2010-09-16PDF 1.2 MB
External Photos LowExternal Photos2010-09-16PDF 908.2 KB
External PhotosExternal Photos2010-07-14PDF 361.1 KB
External PhotosExternal Photos2010-07-10PDF 1.2 MB
EXTERNAL PHOTOSExternal Photos2007-10-15PDF 439.3 KB
ID LABEL LOCATIONID Label/Location Info2007-10-15PDF 89.4 KB
LABEL SAMPLEID Label/Location Info2007-10-15PDF 191.7 KB
Test Setup Photos HighTest Setup Photos2010-09-16PDF 864.4 KB
Test Setup Photos HighTest Setup Photos2010-09-16PDF 1.4 MB
Test Setup Photos LowTest Setup Photos2010-09-16PDF 1.5 MB
Test Setup Photos LowTest Setup Photos2010-09-16PDF 2.3 MB
Test Setup PhotosTest Setup Photos2010-07-14PDF 487.8 KB
Test Setup PhotosTest Setup Photos2010-07-14PDF 487.7 KB
Test Setup PhotosTest Setup Photos2010-07-10PDF 709.6 KB
Test Setup PhotosTest Setup Photos2010-07-10PDF 689.6 KB
TEST SETUP PHOTOSTest Setup Photos2007-10-15PDF 189.4 KB
Test Report HighTest Report2010-09-16PDF 4 MB
Test Report HighTest Report2010-09-16PDF 2.8 MB
Test Report LowTest Report2010-09-16PDF 3.9 MB
Test Report LowTest Report2010-09-16PDF 3.2 MB
Test ReportTest Report2010-01-18PDF 5.4 MB
Test ReportTest Report2010-01-18PDF 1.1 MB
Test ReportTest Report2010-01-12PDF 1.8 MB
Test ReportTest Report2010-01-12PDF 2.8 MB
TEST REPORT 1Test Report2007-10-15PDF 1.4 MB
TEST REPORT 1Test Report2007-10-15PDF 2.3 MB
TEST REPORT 2Test Report2007-10-15PDF 2.8 MB
TEST REPORT 2Test Report2007-10-15PDF 2.4 MB
TEST REPORT 3Test Report2007-10-15PDF 2.5 MB
Class II Change LetterCover Letter(s)2010-09-16PDF 548.4 KB
POACover Letter(s)2010-09-16PDF 449.7 KB
Class II Change LetterCover Letter(s)2010-01-18PDF 334.5 KB
DOC LetterCover Letter(s)2010-01-18PDF 83.5 KB
POACover Letter(s)2010-01-18PDF 142.4 KB
Short Term Confidential LetterCover Letter(s)2010-01-18PDF 117.3 KB
Class II Change LetterCover Letter(s)2010-01-12PDF 95.7 KB
DOC LetterCover Letter(s)2010-01-12PDF 83.5 KB
POACover Letter(s)2010-01-12PDF 142.4 KB
Short Term Confidential LetterCover Letter(s)2010-01-12PDF 117.3 KB
COVER LETTERCover Letter(s)2007-10-15PDF 316.4 KB
RF Exposure HighRF Exposure Info2010-09-16PDF 333.8 KB
RF Exposure LowRF Exposure Info2010-09-16PDF 326 KB
RF EXPOSURERF Exposure Info2007-10-15PDF 48.9 KB

Application Information

Application IDOomk/CGCV2f9kLvomXcb/w==
Final Action Date2010-09-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009334731
Model-AP300
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionMULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Responsible PartyRajendran V Chary, Principal Engineer, rchary@merunetworks.com , 408-215-5338
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This class 2 permissive change adds new antennas. Professional installation is required for certain antennas as documented in this filing. Installers must be provided with antenna installation instructions to satisfy compliance with FCC requirements.

Applications

Application IDDatePurpose
Oomk/CGCV2f9kLvomXcb/w==2010-09-16Class II permissive change or modification of presently authorized equipment
7xdcggY8wq44Demse8Ew+g==2010-09-16Class II permissive change or modification of presently authorized equipment
pFTebnpJTZ1NFxOlkT/vjw==2010-01-18Class II permissive change or modification of presently authorized equipment
37WgiiLbQdZgRdq96AQUcQ==2010-01-18Class II permissive change or modification of presently authorized equipment
Xxdi99AbIj+kydBgI4QAzQ==2010-01-12Class II permissive change or modification of presently authorized equipment
Mie++Wj5Pe+95Y3kZZq9aw==2010-01-12Class II permissive change or modification of presently authorized equipment
jGA12uVWV1t9G3vQk6oToQ==2007-10-15Original Equipment
cOLG3ZDvyIVCMzfVTCrTvQ==2007-10-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.1515CCC, MO
2412-2462 MHz0.3715CCC, MO
2412-2462 MHz0.2315CCC, MO
5180-5240 MHz0.01615ECC, MO
5180-5240 MHz0.01315ECC, MO
5180-5240 MHz0.00715ECC, MO
5745-5825 MHz0.1615CCC, MO
5745-5825 MHz0.4615CCC, MO
5745-5825 MHz0.2215CCC, MO

Grants

TCB Grant - Application Xxdi99AbIj+kydBgI4QAzQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/12/2010

Application Dated: 01/11/2010
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Xxdi99AbIj+kydBgI4QAzQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 01/12/2010

Application Dated: 01/11/2010
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application pFTebnpJTZ1NFxOlkT/vjw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/18/2010

Application Dated: 01/15/2010
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application pFTebnpJTZ1NFxOlkT/vjw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 01/18/2010

Application Dated: 01/15/2010
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Oomk/CGCV2f9kLvomXcb/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/16/2010

Application Dated: 09/16/2010
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This class 2 permissive change adds new antennas. Professional installation is required for certain antennas as documented in this filing. Installers must be provided with antenna installation instructions to satisfy compliance with FCC requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Oomk/CGCV2f9kLvomXcb/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 09/16/2010

Application Dated: 09/16/2010
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This class 2 permissive change adds new antennas. Professional installation is required for certain antennas as documented in this filing. Installers must be provided with antenna installation instructions to satisfy compliance with FCC requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Mie++Wj5Pe+95Y3kZZq9aw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/12/2010

Application Dated: 01/11/2010
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Mie++Wj5Pe+95Y3kZZq9aw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 01/12/2010

Application Dated: 01/11/2010
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application jGA12uVWV1t9G3vQk6oToQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/15/2007

Application Dated: 10/15/2007
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTIRADIO 802.11A/B/G/N WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jGA12uVWV1t9G3vQk6oToQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 10/15/2007

Application Dated: 10/15/2007
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTIRADIO 802.11A/B/G/N WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application cOLG3ZDvyIVCMzfVTCrTvQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/15/2007

Application Dated: 10/15/2007
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTIRADIO 802.11A/B/G/N WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application cOLG3ZDvyIVCMzfVTCrTvQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 10/15/2007

Application Dated: 10/15/2007
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MULTIRADIO 802.11A/B/G/N WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5180.0  -  5240.0 0.013  
CC MO 15E 5180.0  -  5240.0 0.007  

Power listed is maximum conducted for single stream legacy mode. The maximum combined conducted output power level when operating in 802.11n mode is 13mW. Operations in the band 5150-5250MHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7xdcggY8wq44Demse8Ew+g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/16/2010

Application Dated: 09/16/2010
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This class 2 permissive change adds new antennas. Professional installation is required for certain antennas as documented in this filing. Installers must be provided with antenna installation instructions to satisfy compliance with FCC requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7xdcggY8wq44Demse8Ew+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 09/16/2010

Application Dated: 09/16/2010
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This class 2 permissive change adds new antennas. Professional installation is required for certain antennas as documented in this filing. Installers must be provided with antenna installation instructions to satisfy compliance with FCC requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 37WgiiLbQdZgRdq96AQUcQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/18/2010

Application Dated: 01/15/2010
Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 37WgiiLbQdZgRdq96AQUcQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Meru Networks Inc.
894 Ross Drive
Sunnyvale, CA 94089
United States
  Date of Grant: 01/18/2010

Application Dated: 01/15/2010
 
Attention: Rajendran Chary , Principal Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  RE7-AP300
Name of Grantee:  Meru Networks Inc.
Equipment Class: Digital Transmission System
Notes: MULTI RADIO 802.11a/b/g/n WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.15  
CC MO 15C 5745.0  -  5825.0 0.16  
CC MO 15C 2412.0  -  2462.0 0.37  
CC MO 15C 2412.0  -  2462.0 0.23  
CC MO 15C 5745.0  -  5825.0 0.46  
CC MO 15C 5745.0  -  5825.0 0.22  

Power listed is maximum combined conducted output power level when operating in 802.11n mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. Device is operating in 3x3 Spatial Multiplexing/Cyclic Delay Diversity MIMO configurations and single-stream legacy modes as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: