FCC ID REB-APXXX1

HiPATH WIRELESS ACCESS POINT (AP)

by Chantry Networks Inc. (a Siemens Company)

Grantee Code: REB   Product Code: APXXX1
Latest application date: 2012-01-16

FCC ID Device Details

FCC IDREB-APXXX1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeREB
Product CodeAPXXX1
Applicant BusinessChantry Networks Inc. (a Siemens Company) 🇺🇸
Related Domains enterasys.com
Equipment ClassHiPATH WIRELESS ACCESS POINT (AP)
Test FirmElliott Laboratories LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2012-01-16
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2010-05-03
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-05-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-06-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-02-07
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-02-07
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-01-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-01-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-09-07
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-09-07
5180-5240 MHzOriginal Equipment2006-07-19
2412-2462 MHzOriginal Equipment2006-07-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-01-16PDF 5.1 MB
Users ManualUsers Manual2010-05-03PDF 5.8 MB
users manualUsers Manual2010-05-03PDF 5.8 MB
USERS MANUAL 1Users Manual2007-02-07PDF 2.9 MB
USERS MANUAL 2Users Manual2007-02-07PDF 1.3 MB
USERS MANUALUsers Manual2006-07-19PDF 3 MB
INTERNAL PHOTOSInternal Photos2007-01-29PDF 3 MB
INTERNAL PHOTOS 1Internal Photos2006-07-19PDF 476.1 KB
INTERNAL PHOTOS 2Internal Photos2006-07-19PDF 153.9 KB
EXTERNAL PHOTOSExternal Photos2007-02-07PDF 947.8 KB
EXTERNAL PHOTOSExternal Photos2006-07-19PDF 869 KB
LABELID Label/Location Info2006-07-19PDF 27.2 KB
LABEL LOCATIONID Label/Location Info2006-07-19PDF 1.4 MB
Setup PhotosTest Setup Photos2012-01-16PDF 2.8 MB
Test PhotosTest Setup Photos2010-05-03PDF 299.4 KB
TEST SETUP PHOTOSTest Setup Photos2007-02-07PDF 1.6 MB
TEST SETUP PHOTOS 1Test Setup Photos2007-01-29PDF 2.2 MB
TEST SETUP PHOTOS 2Test Setup Photos2007-01-29PDF 2.2 MB
TEST SETUP PHOTOSTest Setup Photos2006-09-07PDF 1.9 MB
TEST SETUP PHOTOSTest Setup Photos2006-07-19PDF 2 MB
Test ReportTest Report2012-01-16PDF 280.5 KB
Test reportTest Report2010-05-03PDF 292.8 KB
test ReportTest Report2010-05-03PDF 292.8 KB
DFS Test ReportTest Report2007-06-08PDF 1.6 MB
TEST REPORT 1Test Report2007-02-07PDF 2.7 MB
TEST REPORT 2Test Report2007-02-07PDF 2.4 MB
CLASS II CHANGE LETTERCover Letter(s)2007-01-29PDF 2.1 MB
COVER LETTERCover Letter(s)2007-01-29PDF 70.8 KB
TEST REPORTTest Report2007-01-29PDF 2 MB
TEST REPORTTest Report2006-09-07PDF 1.9 MB
TEST REPORTTest Report2006-07-19PDF 2.6 MB
Agent AuthorityAttestation Statements2007-06-08PDF 40.9 KB
Attestarion Statements from ManufacturerAttestation Statements2007-06-08PDF 52.3 KB
Declaration for DFS Disabling CapabilityAttestation Statements2007-06-08PDF 40.3 KB
Agent LtrCover Letter(s)2012-01-16PDF 153.3 KB
Cvr LtrCover Letter(s)2012-01-16PDF 31.8 KB
731 form correction requestCover Letter(s)2010-05-03PDF 32.1 KB
Permissive Change RequestCover Letter(s)2010-05-03PDF 59.6 KB
Permissive Change Request letterCover Letter(s)2010-05-03PDF 59.6 KB
Cover Letter from UltratechCover Letter(s)2007-06-08PDF 72.4 KB
COVER LETTERCover Letter(s)2007-02-07PDF 70.9 KB
CONFIDENTIALITY LETTERCover Letter(s)2007-01-29PDF 61.8 KB
CONFIDENTIALITY LETTERCover Letter(s)2006-09-07PDF 55.8 KB
COVER LETTERCover Letter(s)2006-09-07PDF 70.8 KB
CONFIDENTIALITY LETTERCover Letter(s)2006-07-19PDF 35.9 KB
COVER LETTERCover Letter(s)2006-07-19PDF 70.6 KB
MPERF Exposure Info2012-01-16PDF 59.7 KB
Antenna SpecificationsParts List/Tune Up Info2010-05-03PDF 5 MB
RF EXPOSURE 1RF Exposure Info2006-07-19PDF 84.8 KB
RF EXPOSURE 2RF Exposure Info2006-07-19PDF 84.7 KB
RF EXPOSURE 3RF Exposure Info2006-07-19PDF 7.5 KB
RF EXPOSURE 1 OF 3RF Exposure Info2006-07-18PDF 84.8 KB
RF EXPOSURE 2 OF 3RF Exposure Info2006-07-18PDF 84.7 KB
RF EXPOSURE 3 OF 3RF Exposure Info2006-07-18PDF 7.5 KB
BLOCK DIAGRAM Metadata onlyBlock DiagramPDF 39.5 KB
SCHEMATICS Metadata onlySchematicsPDF 243 KB
OPERATIONAL DESCRIPTION Metadata onlyOperational DescriptionPDF 59.1 KB
PARTS LIST Metadata onlyParts List/Tune Up InfoPDF 19.8 KB
PARTS LIST 1 Metadata onlyParts List/Tune Up InfoPDF 115.5 KB
PARTS LIST 1 Metadata onlyParts List/Tune Up InfoPDF 540.2 KB
PARTS LIST 2 Metadata onlyParts List/Tune Up InfoPDF 3.6 MB

Application Information

Application IDBjHBAiE54lZEqkLaxejUiA==
Final Action Date2012-01-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009430000
Model-APXXX1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionHiPATH WIRELESS ACCESS POINT (AP)
Responsible PartyThomas Whissel, Regulatory Compliance Manager, Whissel@enterasys.com , 978-684-1368
AgentMark Mark Mark, Elliott Laboratories LLC, svdoc@ntscorp.com , 5105783500
Technical ContactMark Hill, Elliott Laboratories LLC, svdoc@ntscorp.com , 5105783500
Test FirmDavid Bare, Elliott Laboratories LLC, dbare@elliottlabs.com , 408-245-7800
TCB Emailsvtcb@nts.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 41.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
BjHBAiE54lZEqkLaxejUiA==2012-01-16Class II permissive change or modification of presently authorized equipment
ual6LjjXlbhvkOLtsa7/lg==2010-05-03Class II permissive change or modification of presently authorized equipment
iVlPnX2e/GQZOsCmC+FaNQ==2010-05-03Class II permissive change or modification of presently authorized equipment
f2YXxw6zEutm9v6D/WA9+w==2007-06-08Class II permissive change or modification of presently authorized equipment
mK/emajelInxxFoY3GqQIA==2007-02-07Class II permissive change or modification of presently authorized equipment
kyjIL4KQyfubwo/NeSXmeg==2007-02-07Class II permissive change or modification of presently authorized equipment
lulmwlaMt+NWDgEgDlvklA==2007-01-29Class II permissive change or modification of presently authorized equipment
G4QdIFgAVX7TI2h9cHdifw==2007-01-29Class II permissive change or modification of presently authorized equipment
Scq5gb7WAZ/qGEZLFA+MWA==2006-09-07Class II permissive change or modification of presently authorized equipment
IRLNgBA0v2VI353+HJdEfg==2006-09-07Class II permissive change or modification of presently authorized equipment
322+8F9/YtwWW5i4UhIAdw==2006-07-19Original Equipment
1ybYtj+/QaCyiAUHOMJzPw==2006-07-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.19515CCC
5180-5240 MHz0.02915ECC
5180-5240 MHz0.02915END
5260-5320 MHz0.03115ECC
5260-5320 MHz0.03115E
5745-5825 MHz0.18215CCC
5745-5825 MHz0.18215C

Grants

TCB Grant - Application ual6LjjXlbhvkOLtsa7/lg==

This application does not exist.

EAS Grant - Application ual6LjjXlbhvkOLtsa7/lg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 05/03/2010

Application Dated: 04/05/2010
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Scq5gb7WAZ/qGEZLFA+MWA==

Mail To:
Thomas Whissel, Regulatory Compliance Manager
Enterasys Networks Inc.
50 Minuteman Road
Andover, MA 01810
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/07/2006

Application Dated: 09/07/2006
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (original grant notes)

This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Scq5gb7WAZ/qGEZLFA+MWA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 09/07/2006

Application Dated: 09/07/2006
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (original grant notes)

This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mK/emajelInxxFoY3GqQIA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/07/2007

Application Dated: 02/07/2007
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original Grant Notes)

This Class II permissive change adds optional external antennas with maximum antenna gain of 7 dBi. Professional Installation is required.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mK/emajelInxxFoY3GqQIA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 02/07/2007

Application Dated: 02/07/2007
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original Grant Notes)

This Class II permissive change adds optional external antennas with maximum antenna gain of 7 dBi. Professional Installation is required.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA543178

TCB Grant - Application lulmwlaMt+NWDgEgDlvklA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/29/2007

Application Dated: 01/26/2007
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.

This Class 2 permissive change upgrades components for RoHS compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lulmwlaMt+NWDgEgDlvklA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 01/29/2007

Application Dated: 01/26/2007
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.

This Class 2 permissive change upgrades components for RoHS compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA210524

TCB Grant - Application kyjIL4KQyfubwo/NeSXmeg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/07/2007

Application Dated: 02/07/2007
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This Class II permissive change adds optional external antennas with maximum antenna gain of 7 dBi. Professional installation is required


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kyjIL4KQyfubwo/NeSXmeg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 02/07/2007

Application Dated: 02/07/2007
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This Class II permissive change adds optional external antennas with maximum antenna gain of 7 dBi. Professional installation is required


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA863488

TCB Grant - Application iVlPnX2e/GQZOsCmC+FaNQ==

This application does not exist.

EAS Grant - Application iVlPnX2e/GQZOsCmC+FaNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 05/03/2010

Application Dated: 04/05/2010
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IRLNgBA0v2VI353+HJdEfg==

Mail To:
Thomas Whissel, Regulatory Compliance Manager
Enterasys Networks Inc.
50 Minuteman Road
Andover, MA 01810
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/07/2006

Application Dated: 09/07/2006
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (original grant notes)

This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IRLNgBA0v2VI353+HJdEfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 09/07/2006

Application Dated: 09/07/2006
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (original grant notes)

This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application G4QdIFgAVX7TI2h9cHdifw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/29/2007

Application Dated: 01/29/2007
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.

This Class 2 permissive change upgrades components for RoHS compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application G4QdIFgAVX7TI2h9cHdifw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 01/29/2007

Application Dated: 01/29/2007
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This class 2 permissive change adds compliance for specific co-located transmitter conditions as shown in this composite filing; other co-located configurations require separate evaluation.

This Class 2 permissive change upgrades components for RoHS compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA746261

TCB Grant - Application f2YXxw6zEutm9v6D/WA9+w==

This application does not exist.

EAS Grant - Application f2YXxw6zEutm9v6D/WA9+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 06/08/2007

Application Dated: 04/17/2007
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HiPath Wireless Access Point (AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
ND 15E 5180.0  -  5240.0 0.029  
15E 5260.0  -  5320.0 0.031  

Power listed is conducted. The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BjHBAiE54lZEqkLaxejUiA==

Mail To:
Tri Luu, Vice President of Engineering
Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville, Ontario, L6H 6G4
Canada
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  National Technical Systems - Silicon Valley
41039 Boyce Road
Fremont, CA 94538
Date of Grant: 01/16/2012

Application Dated: 01/16/2012
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 41.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BjHBAiE54lZEqkLaxejUiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 01/16/2012

Application Dated: 01/16/2012
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HiPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 41.3 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 322+8F9/YtwWW5i4UhIAdw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/19/2006

Application Dated: 07/19/2006
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HIPATH WIRELESS ACCESS POINT (AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted.The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 322+8F9/YtwWW5i4UhIAdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 07/19/2006

Application Dated: 07/19/2006
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HIPATH WIRELESS ACCESS POINT (AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5260.0  -  5320.0 0.031  

Power listed is conducted.The above listed frequencies are center frequencies. Operations in the band 5.15-5.25GHz are restricted to indoor usage only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1ybYtj+/QaCyiAUHOMJzPw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/18/2006

Application Dated: 07/18/2006
Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HIPATH WIRELESS ACCESS POINT ( AP)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 1ybYtj+/QaCyiAUHOMJzPw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chantry Networks Inc. (a Siemens Company)
50 Minuteman Road
Andover, MA 01810
United States
  Date of Grant: 07/18/2006

Application Dated: 07/18/2006
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REB-APXXX1
Name of Grantee:  Chantry Networks Inc. (a Siemens Company)
Equipment Class: Digital Transmission System
Notes: HIPATH WIRELESS ACCESS POINT ( AP)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.195  
CC 15C 5745.0  -  5825.0 0.182  

Power listed is conducted. The above listed frequencies are center frequencies.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: