FCC ID REP-3200-2

HotPort Wireless Node

by Firetide Inc.

Grantee Code: REP   Product Code: 32002
Latest application date: 2005-10-15

FCC ID Device Details

FCC IDREP-3200-2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeREP
Product Code32002
Applicant BusinessFiretide Inc. 🇺🇸
Related Domains firetide.com
Equipment ClassHotPort Wireless Node
Test FirmMET Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
4942.5-4987.5 MHzOriginal Equipment2005-10-15
2412-2462 MHzOriginal Equipment2005-10-15
5260-5320 MHzOriginal Equipment2005-10-15

Exhibits

DocumentTypeAvailableFile
Installation ManualUsers Manual2005-10-15PDF 1 MB
Users Guide Metadata onlyUsers Manual2005-10-15PDF 515.1 KB
Users ManualUsers Manual2005-10-15PDF 515.5 KB
Users ManualUsers Manual2005-10-15PDF 515.1 KB
Usres ManualUsers Manual2005-10-15PDF 515.5 KB
Internal PhotographsInternal Photos2005-10-15PDF 437.8 KB
RF Card Internal PhotographsInternal Photos2005-10-15PDF 262.4 KB
External Photographs 1External Photos2005-10-15PDF 845.2 KB
External Photographs 2External Photos2005-10-15PDF 194.6 KB
Label InformationID Label/Location Info2005-10-15PDF 64.1 KB
Antenna Information 1Operational Description2005-10-15PDF 572.8 KB
Antenna Information 2Operational Description2005-10-15PDF 141.5 KB
Antenna Information 3Operational Description2005-10-15PDF 164.9 KB
Operational DescriptionOperational Description2005-10-15PDF 875 KB
Test Setup PhotographsTest Setup Photos2005-10-15PDF 392.9 KB
Test Setup PhotogrpahsTest Setup Photos2005-10-15PDF 392.9 KB
Test Report 1ATest Report2005-10-15PDF 2.4 MB
Test Report 1BTest Report2005-10-15PDF 3 MB
Test Report 1CTest Report2005-10-15PDF 2.7 MB
Test Report 2Test Report2005-10-15PDF 594.1 KB
Test Report 2Test Report2005-10-15PDF 2.1 MB
Test Report 3Test Report2005-10-15PDF 2.1 MB
3200 Report StatementCover Letter(s)2005-10-15PDF 36.8 KB
Agent Authorization LetterCover Letter(s)2005-10-15PDF 184.2 KB
CM9 StatementCover Letter(s)2005-10-15PDF 338.5 KB
Confidentiality RequestCover Letter(s)2005-10-15PDF 35.8 KB
Grant Revision ExplanationCover Letter(s)2005-10-15PDF 43.2 KB
PA StatementCover Letter(s)2005-10-15PDF 35.3 KB
RF Exposure InfoRF Exposure Info2005-10-15PDF 33.5 KB
Tune Up ProcedureParts List/Tune Up Info2005-10-15PDF 338.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 125.5 KB
Board Schematic Metadata onlySchematicsPDF 295.8 KB
Board Schematics Metadata onlySchematicsPDF 295.8 KB
Daughter Board Schematics Metadata onlySchematicsPDF 188.4 KB
Radio Schematics Metadata onlySchematicsPDF 278.6 KB
Daughterboard Bill Of Materials Metadata onlyParts List/Tune Up InfoPDF 44.7 KB
Daughtercard Bill Of Materials Metadata onlyParts List/Tune Up InfoPDF 44.7 KB
Motherboard Bill Of Materials Metadata onlyParts List/Tune Up InfoPDF 43.2 KB
Radio Bill Of Materials Metadata onlyParts List/Tune Up InfoPDF 24.6 KB
Radio Bill of Materials Metadata onlyParts List/Tune Up InfoPDF 24.6 KB

Application Information

Application IDuBbyzJEC/Q8vI9veNzcDKQ==
Final Action Date2005-10-15
Application PurposeOriginal Equipment
Applicant FRN0009447566
Model3200-2
Frequency Range4942.5-4987.5 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionHotPort Wireless Node
Responsible PartySudhir Hirudayaraj, CTO, shirudayaraj@firetide.com , prasanth@firetide.com , +1-4083557203
Test FirmRobert Frier, MET Laboratories, Inc., rfrier@metlabs.com , 4087483585
TCB Emailtcbinfo@metlabs.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is RMS Conducted. Professional installation is required. The antennas with gain greater than 9dBi must be used in fixed, point-to-point or point-to-multipoint operation must be fixed-mounted on outdoor permanent structures as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This Authorization valid only for the mini-PCI cards identified within this application.

Applications

Application IDDatePurpose
uBbyzJEC/Q8vI9veNzcDKQ==2005-10-15Original Equipment
QGwkzZWCvgrT4b/vkxrplg==2005-10-15Original Equipment
2Gk/LlkTI2nIu2Z1yVTETg==2005-10-15Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2412-2462 MHz0.056515CCC
4942.5-4987.5 MHz0.1851.5ppm4M17G7D9
4945-4985 MHz0.1851.5ppm8M28G7D9
4950-4980 MHz0.1851.5ppm16M4G7D9
5260-5320 MHz0.048800015ECC
5745-5825 MHz0.04715CCC

Grants

TCB Grant - Application uBbyzJEC/Q8vI9veNzcDKQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 10/15/2005

Application Dated: 10/15/2005
Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL
2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-3200-2
Name of Grantee:  Firetide Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: HotPort Wireless Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 4950.0  -  4980.0 0.185 1.5  PM 16M4G7D
90 4945.0  -  4985.0 0.185 1.5  PM 8M28G7D
90 4942.5  -  4987.5 0.185 1.5  PM 4M17G7D

Power Output listed is RMS Conducted. Professional installation is required. The antennas with gain greater than 9dBi must be used in fixed, point-to-point or point-to-multipoint operation must be fixed-mounted on outdoor permanent structures as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This Authorization valid only for the mini-PCI cards identified within this application.

EAS Grant - Application uBbyzJEC/Q8vI9veNzcDKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 10/15/2005

Application Dated: 10/15/2005
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-3200-2
Name of Grantee:  Firetide Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: HotPort Wireless Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 4950.0  -  4980.0 0.185 1.5  PM 16M4G7D
90 4945.0  -  4985.0 0.185 1.5  PM 8M28G7D
90 4942.5  -  4987.5 0.185 1.5  PM 4M17G7D

Power Output listed is RMS Conducted. Professional installation is required. The antennas with gain greater than 9dBi must be used in fixed, point-to-point or point-to-multipoint operation must be fixed-mounted on outdoor permanent structures as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This Authorization valid only for the mini-PCI cards identified within this application.



TCB Grant - Application QGwkzZWCvgrT4b/vkxrplg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 10/15/2005

Application Dated: 10/15/2005
Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL
2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-3200-2
Name of Grantee:  Firetide Inc.
Equipment Class: Digital Transmission System
Notes: HotPort Wireless Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0565  
CC 15C 5745.0  -  5825.0 0.047  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QGwkzZWCvgrT4b/vkxrplg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 10/15/2005

Application Dated: 10/15/2005
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-3200-2
Name of Grantee:  Firetide Inc.
Equipment Class: Digital Transmission System
Notes: HotPort Wireless Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0565  
CC 15C 5745.0  -  5825.0 0.047  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 2Gk/LlkTI2nIu2Z1yVTETg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 10/15/2005

Application Dated: 10/15/2005
Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL
2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-3200-2
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HotPort Wireless Node
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5260.0  -  5320.0 0.0488  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2Gk/LlkTI2nIu2Z1yVTETg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Firetide Inc.
Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220
Campbell, CA 950008
United States
  Date of Grant: 10/15/2005

Application Dated: 10/15/2005
 
Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  REP-3200-2
Name of Grantee:  Firetide Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: HotPort Wireless Node
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5260.0  -  5320.0 0.0488  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be professionally installed. The antenna(s) used with this transmitter must be installed to provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: