FCC ID REP-6200-1

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Firetide Inc. Firetide Inc.A Division of UNICOM GLOBAL 2105, South Bascom Avenue, Suite 220 Campbell, CA 950008 United States

Date of Grant: 11/09/2007 Application Dated: 08/15/2007

Attention: Sudhir Hirudayaraj , CTO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	REP-6200-1
Name of Grantee:	Firetide Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	HotPort 620X Wireless Mesh Node
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
ND	15E	5260.0  -  5320.0	0.245
ND	15E	5500.0  -  5700.0	0.245

The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1 meter from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application tlZIOZBPpqSVntC9I5qZJQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 11/09/2007 Application Dated: 11/09/2007

Firetide Inc.

140, Knowles Dr.

House/Apartment

Los Gatos, CA 95032

Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	REP-6200-1
Name of Grantee:	Firetide Inc.
Equipment Class:	Digital Transmission System
Notes:	HotPort 620X Wireless Mesh Node
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.45
CC	15C	5745.0  -  5825.0	0.37

Output power is conducted. Device is restricted to indoor-use only for 5.15-5.25 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75.9 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Firetide Inc. 140, Knowles Dr. House/Apartment Los Gatos, CA 95032 United States

Date of Grant: 11/09/2007 Application Dated: 11/09/2007

Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	REP-6200-1
Name of Grantee:	Firetide Inc.
Equipment Class:	Digital Transmission System
Notes:	HotPort 620X Wireless Mesh Node
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.45
CC	15C	5745.0  -  5825.0	0.37

Output power is conducted. Device is restricted to indoor-use only for 5.15-5.25 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 75.9 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pCjbKYDSr6UD8ddhTAqIUg==

EAS Grant - Application pCjbKYDSr6UD8ddhTAqIUg==

TCB Grant - Application iC23QiQ+4jG+SpCx7IORfw==

EAS Grant - Application iC23QiQ+4jG+SpCx7IORfw==

TCB Grant - Application BdEs3XTsYOWaQDiVJgRCTg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 11/09/2007 Application Dated: 11/09/2007

Firetide Inc.

140, Knowles Dr.

House/Apartment

Los Gatos, CA 95032

Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	REP-6200-1
Name of Grantee:	Firetide Inc.
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	HotPort 620X Wireless Mesh Node
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	4945.0  -  4985.0	0.223	6.5  PM	7M3G7D
	90	4945.0  -  4985.0	0.48	6.5  PM	15M3G7D
	90	4950.0  -  4980.0	0.52	6.5  PM	27M7G7D

Power Output Listed is peak Conducted. The antenna(s) used for this transmitter must be with a separation distance of at least 72.5 cm from all persons during normal operation. Operation is for use in the 4.9 GHz licensed band for point to point or point to multi point operation. The maximum antenna gain must not exceed 21dBi and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Firetide Inc. 140, Knowles Dr. House/Apartment Los Gatos, CA 95032 United States

Date of Grant: 11/09/2007 Application Dated: 11/09/2007

Attention: Suresh Kumar , Hardware Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	REP-6200-1
Name of Grantee:	Firetide Inc.
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	HotPort 620X Wireless Mesh Node
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	4945.0  -  4985.0	0.223	6.5  PM	7M3G7D
	90	4945.0  -  4985.0	0.48	6.5  PM	15M3G7D
	90	4950.0  -  4980.0	0.52	6.5  PM	27M7G7D

Power Output Listed is peak Conducted. The antenna(s) used for this transmitter must be with a separation distance of at least 72.5 cm from all persons during normal operation. Operation is for use in the 4.9 GHz licensed band for point to point or point to multi point operation. The maximum antenna gain must not exceed 21dBi and must not be co-located or operating in conjunction with any other antenna or transmitter. End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

TCB Grant - Application 2/Bu+bFRbZlZcUvp/pAMAw==

EAS Grant - Application 2/Bu+bFRbZlZcUvp/pAMAw==

Mail To: